Comparison Zanussi ZWY 61224WI white vs Zanussi ZWQ 5105 white

Maximum drum rotation speed in spin mode. The higher it is, the more intense the spin. However, note that not all types of fabric normally tolerate high speeds — a speed of 1000 rpm or more should be used only for especially durable fabrics, and delicate ones need to be wrung out at low speeds, so the best choice is a machine that allows you to choose the spin speed.

The maximum spin speed ( 1200 rpm, 1400 rpm), in particular, determines its efficiency (see Spin class), but this parameter is not decisive — the duration of the spin cycle and the diameter of the drum also play an important role. Therefore, for machines with the same spin speed, their efficiency class may differ.

The child lock allows you to lock the control panel so that a child cannot change the operating mode of the washing machine — stop the programme prematurely, start the machine without loading, etc.

The quality of the machine spin mode. The spin class depends on the residual moisture content of the laundry after the end of the washing programme and is indicated by the Latin letter from A to G, where A is the best efficiency, B and C are good, D, E are medium, F, G are very weak. The quality of the spin is closely related to the maximum number of revolves of the drum in this mode. Naturally, machines with better spin quality are more expensive, other things being equal.

This parameter characterizes the efficiency of electricity consumption by the washing machine. Classes are designated in Latin letters from A to G, in ascending order of energy consumption. At the same time, in class A there are subclasses "A+", " A++ " and "A+++"; more pluses means less energy consumption, and the most economical option to date — A +++ — outperforms class A by almost a third.

Machines of classes A + and above are today considered economical, class A — medium, lower classes — high consumption. However, indicators below A are typical for semiautomatic low-cost models. As well as for units with dryers (see above) in which high energy consumption is simply inevitable.

The type of controls provided in the washing machine.

— Rotary knobs. Operation through one or more rotary knobs only, without buttons or other additional elements. This option is found exclusively in semi-automatic (activator) washing machines with minimal functionality. In the simplest of these models, there is only one knob (it sets the duration of the wash) in more advanced ones — two or three (wash timer, spin timer, programme selection). At the same time, the timer knob simultaneously works as a switch, turning on the unit when turning.

— Rotary knob + buttons. Type of control used in most automatic washing machines. The main rotary knob in such models is responsible for selecting the programme. It can be supplemented by auxiliary knobs for setting individual parameters: for example, water temperature and spin speed. And other parameters and additional functions are controlled by buttons. Such controls are quite functional and inexpensive, which led to their popularity.

— Rotary knob + touch controls. Controls, providing a combination of a rotary knob with touch controls. The first is responsible for choosing the main programme; the second is for additional functions and parameters. Such control is somewhat more expensive than the "rotary knob + buttons" combination (see above), but this moment is not fundamental. At the same time, the touch panel gives the device a sty...lish and technological appearance, and on the practical side, it is more convenient for some users since it does not require effort to press. In addition, it is much easier to clean the touch controls from dirt than the buttons.

— Touch controls. Control, carried out only through the touch panel, is much more expensive than the “rotary knob + touch controls” combination and therefore is used mainly in advanced level machines. Units with such controls do not have unnecessary protruding parts on the front panel, which provides not only a neat and pleasant appearance but also ease of cleaning from dirt. And in some models, the touch panel can be placed on the lid of the drum, which allows you to increase its diameter and capacity without increasing the height of the machine itself. At the same time, in some cases (for example, when choosing a programme), the touch controls are less visual and intuitive than the rotary knob, so this option is used relatively rarely.

— Buttons. Button-only controls are fully functional but generally less user-friendly and visual than a combination of buttons with a rotary knob. Therefore, this option is not popular in modern washing machines.

The maximum noise level produced by the machine during operation. Most often indicated for spinning — this is the noisiest mode of operation; for units without spinning (such as semiautomatic devices), this paragraph indicates the overall volume or the volume in the noisiest mode.

The quieter the machine works, the more comfortable it is for others. This moment is especially critical if there are small children in the house. However, the decibel used to measure loudness is a non-linear unit, and the actual noise level is best estimated from comparative tables in special sources.

General dimensions of the washing machine in height, width and depth.

The size of the unit determines not only the size of the space required for installation but also the ability to bring it into a particular room. At the same time, even a relatively small protruding part (like a door latch) can create problems with passing through a doorway. Therefore, in our catalogue, we try, if possible, to indicate exactly the maximum size of the machine — taking into account all the protruding parts. On the other hand, not all manufacturers provide such data. So if there is any doubt, it is worth evaluating the product by size with a certain margin. And specific information on how the dimensions were measured can usually be found in the manufacturer's documentation.

Finally, let's touch on the specifics of individual dimensions. So, in the case of front loaded machines, note that additional space in front inevitably will be required to open the door. Machines whose depth does not exceed 40 cm are considered narrow. They can be a lifesaver in cramped conditions, especially if the design provides top loading. And a height of 120 cm or more is an almost unmistakable sign of a machine with 2 drums which are located one above the other. It does not only increase capacity but also allows you to simultaneously wash two sets of things in different modes. The reverse side of these advantages is traditional...— high cost.