Chargers & Jump Starters

The world’s most advanced 12V & 24V battery charger! OptiMate 6 12V-24V is perfect for high performance starter & deep cycle batteries that demand temp. controlled charging & long term maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 3 – 240Ah) | 24V (batteries from 1- 100Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step SAFE pulse recovery. CHARGING AMPS : 6A @ 12V / 3A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

1000mm cable length 5A (blade type) fuse Compatible with CTEK Connectors: Comfort Connector, Comfort Indicator 5A maximum current 21mm cig plug diameter

Mains charger for SV20 power tool batteries - Model Nos CP20VBP2 CP20VBP4 CP20VBP6. LED indicates status of battery from charging to full. Suitable for use with the SV20 Series.20V SV20 Series Dual Battery Charger• Part of the SV20 Series designed for the professional offering heavy-duty high performance durable tools with lightweight composite designs for superior control and comfort.• Mains charger for SV20 power tool batteries - Model Nos CP20VBP2 CP20VBP4 CP20VBP6.• LED indicates status of battery from charging to full.• Suitable for use with the SV20 Series.• Model No. CP20VMC2Model No: CP20VMC2:Application(s): CP20VBP2PTDSEACP20VMC2

Victron Energy Blue Smart IP22 12-Volt 30 amp 230V with single Output is the new professional battery charger with wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available The Blue Smart Charger features a microprocessor controlled adaptive battery management, The adaptive feature will automatically optimize the charging process relative to the way the battery is being used High efficiency and also Protected against overheating: With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard Also charges Li-ion batteries: Li-ion batteries are charged with a simple …

Insulated charging clamps · Storage bag The batteries can therefore be recharged even when plugged in, without causing damage to the vehicle electronics. With the pulse holding charge, the batteries remain ready for use The device can stay plugged into the battery for a long time

Switch between standard or BMW CAN bus program Ideal for: AGMMF, STD, GEL and spiral cell batteries from 2Ah to 50Ah Saving: 0.5V low voltage start 2stage desulfation recovery . Charging current: 1 A Accessories included: O9 DIN plug O4 clamp cable for charging on the bench

Jump Start Charger / Protection Reverse Polarity

With stylish LED lighting (blue) and design mesh 2-way speaker, 3" tweeter, 6.5" subwoofer/ midrange speaker With illuminated bass reflex openings With carpet panelling Speaker terminal connections: (4-pin) suitable for cables of 2.5 mm², incl. 12 V connection, Specifications: maximum load: 300 W (impulse), frequency: 60-22,000 Hz, max. sound pressure level: 90 dB, impedance, 4 ohms

Powerful - high charging current up to 27 A for fast charging Compatible - for batteries with a capacity of 20 - 48 Ah (12 V). 28 - 85 Ah (24 V) Practical – cable firmly installed in the device plus cable compartment Variable - MIN/MAX switch for different charging levels

Very compact and powerful, the Clarke JSM1000 Micro Jump Start is an amazingly small and lightweight portable lithium-polymer power bank with inbuilt torch which easily fits in a pocket, weighing only 365g (without leads). It will jump start a car with a flat battery, making it perfect for emergency situations and will display the battery level % via the digital screen. In addition it provides 2x USB 5V outputs for charging mobile phones, tablets, cameras etc. An ideal device to keep in your vehicle glove compartment. The Clarke JSM1000 Micro Jump Start is supplied with a handy carry case, heavy duty smart cable with clamps, 12V USB Car Adaptor, and 3-in-1 USB to Micro-USB/Lighting/USB-C

The GYSFLASH 4.12 (UK) is particularly recommended for recharging 12 V motorcycle, jet-ski, karting and light vehicle batteries. Charging capacity from 1.2 to 70 Ah (130 Ah in charge maintenance) Optimized for maintain a high level of performance in cold weather (“Cold charge” mode) Total protection: against short circuits, reverse polarity and overloads Compact, lightweight design and waterproof against dust and liquids (IP65) Fully automatic and intelligent charging curve in 7 stages (50% faster than a traditional charger) 230V Power supply Delivered with clamps and connection terminals

E-Mobility by AEG: the AEG Type 2 - Type 2 charging cable is a high-quality charging cable for your electric vehicle. The type 2 plugs guarantee European mobility and can be used on almost any public charging column. Efficient: with a charging current of up to 32 A and a charging output of up to 15.36 kW, your electric vehicle can be charged quickly and efficiently. Quality: the AEG charging cable is made of high-quality pure copper and ensures a fast transfer speed. Protection: the charging cable complies with the highest technical standards and reliably protects against high electrical voltages such as lightning impact and from too low voltage and thus against battery damage. The also integrated …