Chargers & Jump Starters

Test batteries on or off vehicles quickly. Reliably test batteries and alternators and test charging systems ability, up to 100 amp loading capability. Safety switch prevents sparking. Heavy duty plated clamps. Suitable for most 12-volt car/van lead acid batteriesSuitable for all 12v Lead/Acid batteries and alternators and test charging systems ability.Tests up to 100amps.Safety switch prevents sparking.Heavy duty plated clamps.CE and RoHS compliant.

IDEAL FOR: 4X AGM, GEL & STD 12V batteries from 6 – 96Ah // Lithium (LiFePO4) 12.8/13.2V batteries from 2 – 24Ah CHARGING AMPS: 2A (constant current, per bank) SAFE: No risk of overcharging. Totally safe for vehicle electronics. INCLUDED: 4x weatherproof battery lead & 4x battery clip set.

Product 1: Quality Product Product 2: Quality Product

The Paslode Li-ion Battery Charger has a fast charge feature and voltage sensing electronics to prevent overcharging. Suitable for charging Paslode lithium batteries only. 200 shots in just two minutes of charging. It is also compatible with the Paslode in Car Charger (900507). For use with IM360Ci PPN35Ci IM350+ IM65 IM65A and IM50.PTDPAS018882

Jump Leads / Length of Cable 350 cm

Power your heated clothing fitted with a 5.5mm by 2.5mm plug directly from your permanent battery lead M6 ringlets Length 50cm

Enables your car battery to be charged through a 12V cigarette socket Compatible with all CTEK chargers up to 7A Fits 12mm and 21mm sockets Easy to fit and has a 60mm length cable International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Steel case with carry handle this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly. Rocker switches control variable output to the battery to maintain peak condition. Suitable for regular and low maintenance batteries.28A 12/24V Battery Charger• Steel case with a sturdy carry handle this single phase charger features good ventilation to help maintain low transformer temperatures.• A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event of the

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases, including trickle/maintenance. and suitable for 12V and 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during …

The Victron Energy Rubber Bumper can be used for the following range of Victron Energy Blue Smart IP65 Charger 12/10, 12/15, 24/8 Victron Energy Blue Smart IP65 Charger is already protected against dust, and water spray - now you can protect it from accidental damage too This rubber bumper protects your IP65 charger from knocks, bangs and scratches and helps extend its life Easy grip and shock absorbing construction Dimensions: 7.48 x 4.13 x 2.36 inches Weight: 0.31 lb This comes with 5 year Warranty Guarantee

Tough, durable, bend-resistant, non-flammable, 5 metre cable Mode 3, Type 2 to Type 2, 3, up to 32A, 3 Phase, up to 22kW Safe, high temperature resistant epoxy resin handles Strong synthetic carrier bag with velcro strips for non-slip storage CE, SGS approved

To charge lead acid batteries with liquid electrolyte: - 12V: from 35 to 210 Ah - 24V: from 20 to 100 Ah Ammeter to indicate the charge 2 charge speeds: Normal and “Boost” Copper wound transformer Clamp cables 1.5m & Power supply cable 1.3m Thermal protection of the transformer Protection against polarity reversal with a 20A automotive fuse at the front Isolated clamps Metallic casing Classsification: EN 60335-2-29

Charger Accessories / Length of Cable 40 cm / Portable / Protection Class IP 65

Battery Suitable for all types permantente monitoring Prevents energy loss The engine always remains M3 Battery is charged always