Chargers & Jump Starters

Jump Leads / Length of Cable 300 cm / Portable

The ACCUMATE 3 is a fully automatic dual charger/optimiser that allows either 6 or 12v batteries to be charged simply and easily from the same unit. It's safe for use with all types of lead-acid batteries, including maintenance free and gel varieties, Deep cycle and leisure batteries.Its three stage charging process is the most efficient and effective way to return acid or gel batteries to full capacity and prolong battery life. It automatically tests, diagnoses, charges and maintains the battery, Accumate 3 can also be left permanently connected to the vehicles battery and will keep it fully maintained...even if you have an alarm fitted.Please note: Will also charge and maintain unconnected

E-Mobility by AEG: the AEG Type 2 - Type 2 charging cable is a high-quality charging cable for your electric vehicle. The type 2 plugs guarantee European mobility and can be used on almost any public charging column. Efficient: with a charging current of up to 32 A and a charging output of up to 15.36 kW, your electric vehicle can be charged quickly and efficiently. Quality: the AEG charging cable is made of high-quality pure copper and ensures a fast transfer speed. Protection: the charging cable complies with the highest technical standards and reliably protects against high electrical voltages such as lightning impact and from too low voltage and thus against battery damage. The also integrated …

MK-220E Battery Charger UK/EU Power supply included: Yes Made in: USA Type: Charger Power Supply: 230V

Jump Start Charger / Protection Reverse Polarity

J1000

Selection of charging current: 2 A / 8 A / 15 A Choice of battery type: STD / AGM / CAL ✅ Intelligent portable charger for charging 12 volt acid, gel, AGM and MF batteries. Power supply 230 V, charging voltage 12 V, charging current 2/8/15 A.

The Sealey emergency jumpstarter is built with a composite case with integral battery clip storage and carry handle for added convenience. This model is fitted with a 12V power socket that will accept any 12V device with a vehicle accessory socket plug, and two batteries connected in parallel to give high peak and cranking currents. This unit also features a test button to check battery condition, and a low voltage switch for use when on 24V system recharge. Completing this jump starter is a robust build and a 230V mains charger that benefits from automatic cut off, to prevent damage to the battery.

E-Mobility by AEG: the AEG Type 2 - Type 2 charging cable is a high-quality charging cable for your electric vehicle. The type 2 plugs guarantee European mobility and can be used on almost any public charging column. Efficient: with a charging current of up to 32 A and a charging output of up to 15.36 kW, your electric vehicle can be charged quickly and efficiently. Quality: the AEG charging cable is made of high-quality pure copper and ensures a fast transfer speed. Protection: the charging cable complies with the highest technical standards and reliably protects against high electrical voltages such as lightning impact and from too low voltage and thus against battery damage. The also integrated …

The Warrior battery charger/conditioner is powerful, versatile and the perfect multi-purpose battery care product for your garage or workshop! It can charge and maintain 6v, 12v (lead acid, gel, and AGM batteries) and lithium (LIFEPO4) batteries, with specific automated programs for each type of battery. It is a fully fit and forget battery charger ideal for long-term maintenance and offers a wide charging range on all lead-acid batteries up to 120Ah and up to 36Ah on lithium batteries, including a low temperature charging mode for lead-acid batteries if the temperature is below -10°C.The charger is housed in a durable, hard-wearing plastic case to ensure it can take the rigors of being

To supply 2 heated garments (jacket / gloves, etc.) via your permanent SAE battery cable! Length = 12" / 30 cm. -40 ° C / -40 ° F For use at very low temperatures. Cable remains flexible at temperatures below freezing. 2 x DC 2.5 mm jacks. Max. Cable rating: 10 Amp. With cable seals for DC 2,5 mm and OptiMate heavy load SAE connection.

Charges batteries up to 300Ah. Maintains larger batteries up to 500Ah Fully automatic charging includes patented desulphation and pulsemaintenance programmes Analysis mode to check if battery can hold charge IP44 rated - suitable for outdoor use 2 year warranty

Part of the D20 multi-tool battery system. This 20V Lithium-ion charger suitable for use with all of the D20 battery sizes. Charging indicator lights show the charging status. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.PTDDRPDIR97914

Mains charger for SV20 power tool batteries - Model Nos CP20VBP2 CP20VBP4 CP20VBP6. LED indicates status of battery from charging to full. Suitable for use with the SV20 Series.20V SV20 Series Lithium-ion Battery Charger• Part of the SV20 Series designed for the professional offering heavy-duty high performance durable tools with lightweight composite designs for superior control and comfort.• Mains charger for SV20 power tool batteries - Model Nos CP20VBP2 CP20VBP4 CP20VBP6.• LED indicates status of battery from charging to full. • Suitable for use with the SV20 Series.• Model No. CP20VMCModel No: CP20VMC:Application(s): CP20VBP2PTDSEACP20VMC

Seven Step Smart Charge Algorithm, Automatic Power Supply Function, Water, Dust and Chemical Resistant Technical Specification: 12V, 4AH, RH+ 5 Year Warranty