Chargers & Jump Starters

Fully automatic multi-stage microprocessor controlled battery charger and maintainer. Sturdy case with protective bumpers and built-in hanging hook. By modifying the charge output through constant monitoring the life and condition of the battery is optimised. Scrolling digital display with various inbuilt language options. Charge status LED. Multistage charging features thermal runaway as well as integral ventilation and spark-proofing for maximum safety. Reverse polarity protection in case incorrectly connected to battery.Schumacher® 15A/10A 12//24V Automatic Smart Battery Charger & Maintainer• Output: 12/24V - 15/10A.• Battery Range: 40-230Ah Lead Acid.• Fully automatic

Fully automatic microprocessor controlled battery charger and maintainer featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid calcium AGM/GEL leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged maintained and ready to use.Schumacher® 10A 12V Automatic Smart Battery Charger & Maintainer• Output: 12V 10A.• Battery Range: Max. 230Ah Lead Acid.• Fully automatic microprocessor controlled battery charger and

Liquid crystal displayFor status monitoring and set-up Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable. Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk. Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only). Power Supply: None UK/EU …

The Oxford Solariser is a solar battery charger for maintaining 12Volt Automotive batteries all year round. A perfect companion when vehicles left outside or in remote lock-ups where the Solariser can be left outside or attached to a window or garage roof. LED light shows battery will charge with available light and is quick and easy to attach to the battery, simply by plugging into the cigarette lighter socket or with the permanent battery connection leads supplied.

Smart Battery Charger for 24v and 12v Batteries The HYSC-7000 is a SMART 230V car battery charger from Hyundai suitable for car batteries, motorbike, motorhomes, caravan leisure batteries and more Charge A Variety Of Batteries Designed for charging all types of 12V lead acid, 24V lead acid batteries AND 12v lithium-ion batteries, including WET (Flooded), MF (Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat), AGM+ and LIB (Lithium-Ion) batteries. It is suitable for charging battery capacities from 1.2 to 130 amp-hours and maintaining all battery sizes. Battery Repair Mode Extend the life of tired batteries with Repair Mode, an advanced battery recovery mode for

Fully protected against reverse charging and overload. Compact, lightweight unit that also provides high amperage output. Capable of starting all 12V vehicles and up to 400-450hp, 24V, 4.5L light commercial vehicles. As well as being light, Lithium-ion batteries have numerous advantages over lead acid, including a flat discharge curve. This ensures a greater and extended performance and holds the charge for up to five times longer with high energy density levels giving more battery power per gram. Includes an integral 3W worklight for use at night. Fitted with a 32000mAh @ 3.2V battery and two USB (5V/1A & 5V/2A) outlets, this unit can also supply up to ten full charges for smartphones and MP3 …

Converter lead to connect your OptiMate with SAE-compatible connector to TM-accessories (as used with AccuMate and pre 2012 OptiMate models).  Simply plug one end of the converter lead into a standard OptiMate TM lead (e.g. TM71) and you can then use a newer OptiMate, or other SAE accessory). In this way, you can connect an SAE compatible OptiMate to a bike or car equipped with a TM lead. Supplied complete with removable weatherproof rubber cap.

The Optimate Extension Leads enable OptiMate Chargers to be used further from the vehicle or battery.Simply plug one end into the outlet lead of the OptiMate and the other end into the accessory cable (e.g. eyelet lead as supplied with OptiMate, or other SAE accessory). Heavy-duty cables help to prevent Voltage drop.O33 OptiMate SAE - 1m (MTXO33)This is a 5 Amp low temperature rated charger extension lead with weather protected SAE connection system.Innovative heavy-duty connection systemCompatible with standard SAE connectorsReliable weatherproof connectionThick copper 18 SWG cableLength: 100cmWarranty: 3 yearsO13 OptiMate SAE - 4.6m STD (MTXSAE-73)This is a 5 Amp charger extension

The Optimate Extension Leads enable OptiMate Chargers to be used further from the vehicle or battery.Simply plug one end into the outlet lead of the OptiMate and the other end into the accessory cable (e.g. eyelet lead as supplied with OptiMate, or other SAE accessory). Heavy-duty cables help to prevent Voltage drop.O33 OptiMate SAE - 1m (MTXO33)This is a 5 Amp low temperature rated charger extension lead with weather protected SAE connection system.Innovative heavy-duty connection systemCompatible with standard SAE connectorsReliable weatherproof connectionThick copper 18 SWG cableLength: 100cmWarranty: 3 yearsO13 OptiMate SAE - 4.6m STD (MTXSAE-73)This is a 5 Amp charger extension

The Optimate Extension Leads enable OptiMate Chargers to be used further from the vehicle or battery.Simply plug one end into the outlet lead of the OptiMate and the other end into the accessory cable (e.g. eyelet lead as supplied with OptiMate, or other SAE accessory). Heavy-duty cables help to prevent Voltage drop.O33 OptiMate SAE - 1m (MTXO33)This is a 5 Amp low temperature rated charger extension lead with weather protected SAE connection system.Innovative heavy-duty connection systemCompatible with standard SAE connectorsReliable weatherproof connectionThick copper 18 SWG cableLength: 100cmWarranty: 3 yearsO13 OptiMate SAE - 4.6m STD (MTXSAE-73)This is a 5 Amp charger extension

The Sealey emergency jumpstarter is built with a composite case with integral battery clip storage and carry handle for added convenience. This model is fitted with a 12V power socket that will accept any 12V device with a vehicle accessory socket plug, and two batteries connected in parallel to give high peak and cranking currents. This unit also features a test button to check battery condition, and a low voltage switch for use when on 24V system recharge. Completing this jump starter is a robust build and a 230V mains charger that benefits from automatic cut off, to prevent damage to the battery.

The Sealey emergency jumpstarter is built with a composite case with integral battery clip storage and carry handle for added convenience. This model is fitted with a 12V power socket that will accept any 12V device with a vehicle accessory socket plug, and two batteries connected in parallel to give high peak and cranking currents. This unit also features a test button to check battery condition and a low voltage switch for use when on 24V system recharge Completing this jump starter is a robust build and a 230V mains charger.

The Sealey emergency jumpstarter is built with a composite case with integral battery clip storage and carry handle for added convenience. This model is fitted with a 12V power socket that will accept any 12V device with a vehicle accessory socket plug and two batteries connected in parallel to give high peak and cranking currents. Completing this jump starter is a robust build and a 230V mains charger.

With a heavy duty steel case and high power battery, the PowerStart emergency jump starter is ideal for starting vehicles up to 500HP. The heavy-duty copper cables provide efficient power transfer and the large easy to read battery indicator provides quick knowledge of the battery and its current state of charge. Completing the product, is on board spike and surge suppressing to provide safety and reduced risk of any damage to the vehicle.

With a heavy duty steel case and high power battery, the PowerStart emergency jump starter is ideal for starting vehicles up to 900hp. The heavy-duty copper cables provide efficient power transfer and the large easy to read battery indicator provides quick knowledge of the battery and its current state of charge. Completing the product, is on board spike and surge suppressing to provide safety and reduced risk of any damage to the vehicle.

With a heavy duty steel case and high power battery, the PowerStart emergency jump starter is ideal for starting vehicles up to 1000hp. The heavy-duty copper cables provide efficient power transfer and the LED battery indicator provides quick knowledge of the battery and its current state of charge. Completing the product is on board spike and surge suppressing which provides added safety, and a reduced risk of any damage to the vehicle.

The Sealey emergency jump start has a professional grade, high output AGM battery that has been especially formulated to jump start vehicles. This model features a robust case, which is durable and corrosion proof for easy portability. The battery includes an automatic maintenance charger, with patented microprocessor controller to enable speedy charging and thermal runaway protection. Completing this jump starter is an audible warning system (AWS) which signals if the unit has been turned on for too long without being connected to a battery, and easy cable and clamp storage to ensure the unit is compact and tidy when not in use.

The Oximiser 900 is the ultimate optimiser that no garage should be without. Designed to be left permanently connected to provide guaranteed long-term battery care, the Oximiser 900 is suitable for most 12V battery types up to 30Ah including Gel, MF and Acid batteries. Even Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged. Do not use on Lithium batteries.6 Stage battery management system:Polarity Check: Checks the battery leads have been connected correctlyBattery Analysis: assesses battery & determines best charging methodBulk Fast Charge: Charges at a fast rate to bring the battery to approximately 85% capacityAbsorption Charge: lowers the charge rate …

The Oximiser 601 is the essential optimiser that no garage should be without. Designed to be left permanently connected to provide guaranteed long-term battery care, the Oximiser 601 quickly charges a battery at up to 600mA/hour until full and maintains a gentle trickle charge to keep battery optimised. 3 Stage battery management system:- Polarity Check: Checks the battery leads have been connected correctly- Bulk Fast Charge: Charges at a fast rate to bring the battery to approximately 85% capacity- Float Charge: Applies a small float charge current to maintain voltageKey specification as follows:- Essential Battery Optimiser- Suitable for 12V automotive battery types up to 30Ah- Can be used w…

The Oximiser 3X is Oxford's most versatile, most powerful, multi-purpose battery maintenance product. It offers not one, but three automated charging programs for differing battery sizes*. Making this charger perfect for bikes, cars and even leisure batteries.So if you have multiple toys in your garage, it's the only battery optimiser you are likely to need!8 Stage Management System:1. Polarity Check: Checks the battery leads are correctly connected2. Battery Analysis: Assesses battery and determines best charging method3. Soft Start Charge: Controlled build-up of charge current to ensure discharged batteries are charged safely4. Bulk Fast Charge: Charges at a fast rate to bring the battery to…

MK-220E Battery Charger UK/EU Power supply included: Yes Made in: USA Type: Charger Power Supply: 230V

The Sealey PBI2212GS is a professional grade, high performance AGM battery, specially formulated to jump-start vehicles. This unit is DERKA approved and includes an automatic maintenance charger with patented microprocessor controlled speed charging and thermal runaway protection. This combined with an isolating on/off switch, digital display showing the internal battery level and the vehicle battery voltage, and a 2300 peak Amp output makes this a very capable jump starter. A fusible link integrated in the output cable provides surge and spike protection, preventing damage to delicate and sophisticated vehicle electronics as well as the booster with heavy-duty clamps with a braided link

Surprisingly small, but packs a powerful punch! The new Multi-function Jump Starter from Laser Tools (part number 7405) is an efficient and extremely compact emergency engine starting power pack. Packed full of features, it also features a bright LED to illuminate the work area, (flashing mode can be used as an emergency beacon), two USB outputs (for charging mobile phones, etc), a Type-C input/output port and a digital voltage display on the cable clamp adaptor. The unit and accessories are supplied in a convenient and protective case. The unit is charged from a suitable USB port on a PC, taking approximately three hours to fully charge. As it charges, the power/charging LED display will

Very compact and powerful, the Clarke JSM600 Micro Jump Start is an amazingly small and lightweight portable lithium-polymer power bank with inbuilt torch which easily fits in a pocket, weighing only 300g (without leads). It will jump start a car with a flat battery, making it perfect for emergency situations. In addition it provides USB 5V device charging for mobile phones, tablets, cameras etc. An ideal device to keep in your vehicle glove compartment. The Clarke JSM600 Micro Jump Start is supplied with a heavy duty smart cable with clamps, USB-C to USB-A charging cable, 12V USB Car Adaptor, and 3-in-1 USB to Micro-USB/Lighting/USB-C while also including a 12-Month Manufacturer's