Chargers & Jump Starters

Up to 1200 A peak current: for transferring the charging current to start even almost completely discharged batteries Up to 9.5 litres: suitable for starting vehicles with a petrol or diesel engine with up to 9.5 L displacement 600 A continuous current: for continuous current transmission and to protect against overheating, a continuous current of 600 A is given PURE COPPER The cable is composed of multi-strand pure copper conductors, with insulated terminals, handles and cables Cable length: 5.0 metres

The Gunson 77115 maintenance battery charger is a fully automatic, microprocessor controlled unit delivering a maximum charge rate of 2A . It is suitable for 6 or 12V batteries with capacities between 10AH to 80AH. It is a maintenance battery charger and as such is not suitable for charging severely discharged batteries. It charges in three stages, initially pulse-charging to assist with battery desulphurisation (if necessary), then brings the battery up to 100% capacity. The final stage is a maintenance pulse charge (float mode) which will maintain the battery in a fully charged state without overcharging. It features short-circuit protection, overload current protection, and over voltage protection.…

Innovative heavy-duty connection system Compatible with standard SAE connectors Reliable weatherproof connection Thick copper 18 SWG cable Length: 50cm

Indicates when the harmful sulfation process begins Fits us 800, multi US 3300, multi US 7002, US 0.8, and mus 4.3 battery chargers Designed to make the maintenance of the battery in the vehicle effortless and convenient Easily shows the status on the battery and makes sure that the battery can always get the care it needs

For workshop and home use. Suitable for conventional lead acid batteries up to 200Ah. Well-designed convenient machine with cable storage and fitted with an integral carry handle. Supplied with insulated copper leads and battery clips.PTDDRPDIR52965

Fully automatic microprocessor controlled battery charger and maintainer featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid calcium AGM/GEL leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged maintained and ready to use.Schumacher® 6A 12V Intelligent Battery Charger & Maintainer• Output: 12V 6A.• Battery Range: Max. 130Ah Lead Acid.• Fully automatic microprocessor controlled battery charger and

Victron Energy Blue Smart IP22 12-Volt 30 amp 230V with 3 Output is the new professional battery charger with wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available The Blue Smart Charger features a microprocessor controlled adaptive battery management, The adaptive feature will automatically optimize the charging process relative to the way the battery is being used High efficiency and also Protected against overheating: With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard Also charges Li-ion batteries: Li-ion batteries are charged with a simple bulk …

Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible Incorrect installation can be hazardous, Please …

Easy to install Comes standard with an end cap attached to ensure the connection stays in good condition while not in use Convenient way to connect from a standard style O. E. , SAE or aftermarket pigtail lead to your CTEK products Easy to read display

Victron Energy Blue Smart IP22 12-Volt 20 amp 230V with 3 Output is the new professional battery charger with wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available The Blue Smart Charger features a microprocessor controlled adaptive battery management, The adaptive feature will automatically optimize the charging process relative to the way the battery is being used High efficiency and also Protected against overheating: With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard Also charges Li-ion batteries: Li-ion batteries are charged with a simple bulk …

A mains powered 4A intelligent battery charger for use on 6V and 12V automotive batteries. Fully automatic, it features a 10-stage charging cycle which monitors the state of the battery and adjusts the charging output to suit. Automatically drops to a trickle charge of

Victron Energy Blue Smart IP22 Charger 12 20 1 230V BPC122042022 Color : Blue Victron Energy

Charges Batteries Up To 110Ah. Maintains Larger Batteries Up To 160 Ah Unique Reconditioning Mode, Built-Intemperature Sensing Capabilities Completely Sealed Unit, Spark Proof And Reverse - Polarity Protected Premium Input And Output Cable With Robust Strain Relief (1)CTEK40-206 MXS 5.0 Battery Charger, (1)CTEK56-382 Indicator Eyelet Accessory

Specifically designed to charge all types of 12v lead batteries in cars, vans, camper vans etc. Designed for 12 V batteries from 1.2 to 250 ahr and charging capacity from 20 to 250 Ah (330 Ah in charge maintenance) Fully automatic and intelligent charging curve in 8 steps (50% faster than a traditional charger) Total protection: against short circuits, reverse polarity and overloads and protection of the vehicle’s on-board electronics Compact, lightweight design and sealed against dust and liquids (IP65) Improves battery longevity thanks to “Refresh” mode Recovers even deeply discharged batteries (SOS Recovery) Equipped with a high sensitivity sensor for adjustment automatic charging parame…

An easy to carry heavy duty charger suitable for all types of 12V & 24V lead-acid batteries. The multiple intelligent charging stages diagnose recover maintain and condition the battery. Also featuring an alternator check to identify the output percentage of the vehicles charging system.Please note – Not Suitable for Lithium ion & Li-Po batteries- Suitable for 12V lead-acid batteries up to 500Ah and 24V up to 240Ah- 8 intelligent charging steps including desulphation to restore battery capacity- Digital illuminated screen display. Automatic battery voltage detection- Boost feature (12V) for faster charging and vehicle starting- Reverse polarity and overcharge protection. Anti-spark

Car Battery Charger / Peak Current 200 A