Chargers & Jump Starters

The Sip Chargestar D40 Digital Battery Charger Is A Powerful And Portable Digital Battery Charger Designed For Charging All Types Of 12V And 24V Lead Acid Batteries. Featuring An Intelligent Microprocessor With 8-Step Automatic Charging Cycle The Chargestar D40 Makes Battery Charging Easier Faster And Safer. Applications & Uses: Ideal For Battery Charging Applications In Automotive And Workshop Environments. Suitable For Charging Commercial Vehicle Batteries. • Versatile Battery Charger Suitable For A Variety Of 12V And 24V Lead Acid Batteries: This Includes Wet Mf Efb Agm And Caca Battery Types. Charging Capacity Of Up To 550Ah For 12V And 300Ah For 24V. •

Jump Leads / Length of Cable 300 cm

High efficiency diagnostic charger and tester for LiFePO4 / LFP batteries. Ideal for: LiFePO4 (LFP) 4s / 5s batteries from 2.5 – 120Ah. SAVE mode with BMS reset : starts from 0.5V with continuous monitoring / testing of charge acceptance or bad / shorted cell condition. Unnecessary (and unsafe) charging of a bad battery is prevented. CHARGING AMPS : 10A (AmpMatic) Included: Weatherproof battery lead & standard battery clip set

The SIP 12V SC Pro Booster 8000 is designed with 18x 600F ultracapacitors for powerful performance without the need of an internal AGM battery, meaning maintenance-free operation and an unlimited shelf life, plus a lifespan of over 1 million cycles. With a high current superconductor design, the Pro Booster 8000 offers boost-starting that is ideal for motorcycles, cars, vans, trucks and tractors. KEY FEATURES 8000A boost peak rate and 1200A cranking rate 18x high-quality 600F ultracapacitors for powerful performance Batteryless design for unlimited shelf life and maintenance-free use,ON/OFF switch and built-in safety fuse on the positive clamp Robust and shockproof ABS casing for

BATTERY SUPPORT FOR ON THE GO: The D250SE is a fully automatic on-board charger that powers 12V lead-acid batteries with current up to 20A or secondary lithium-ion batteries with a capacity between 40 and 300Ah. The selectable charging algorithms are designed for 12 V AGM and lithium-ion batteries (*12 V LiFePO) Compatible with intelligent alternators: full functionality with all alternator types MAXIMIZED SOLAR ENERGY PERFORMANCE: The solar panel controller with maximum power point tracking (MPPT) optimises the available performance Charging of second and starter batteries: once the dual battery is fully charged, the D250SE automatically redirects maintenance charging power to the starter …

Protection Overvoltage Protection

Jump Start Charger / Protection Reverse Polarity / Peak Current 20,000 A / Protection Class IP 65

Victron Energy Smart IP43 24-Volt 16 amp 85-250V (1+1) features 2 isolated outputs - The second output, limited to approximately 3 amp and with a slightly lower output voltage, is intended to top up a starter battery The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The char…

For use with NOCO Genius Smart Battery Chargers. G750UK, G1100UK, G3500UK and G7200UK. 12V plug Female Outlet. use with 13.6V Supply Mode to power other DC devices (i.e. Tire inflator). Ergonomically Designed. makes battery connecting and disconnecting effortless Built-In Fuse Protection: protects against potentially dangerous short circuits Compatible with NOCO Genius Smart Battery Chargers only. Not for use with NOCO Genius Boost UltraSafe Lithium Jump Starters. For use with G7200EU (13.6V Supply Mode) Ergonomically designed to make battery connecting and disconnecting effortless Built-in fuse protection to protect against potentially dangerous short circuits Plug-N-Play connector …

For workshop and home use. Suitable for conventional lead acid batteries up to 250Ah. Well-designed convenient machine with cable storage and fitted with an integral carry handle. Supplied with insulated copper leads and battery clips.PTDDRPDIR52985

Additional docking station to allow the booster pack to be used in additional vehicles.Includes one way diode to connect to the vehicle's batterySuitable for models 520006DC and 520008DCPlease note that Sykes-Pickavant may require additional time to assemble, calibrate or source certain products/components from their production facilities. Once you have placed an order we will always notify you if a delay is applicable, however if you require your order to be sent urgently we recommend that you call our customer service team who will be happy to advise whether we can meet your specified time frame.

The Victron Energy Rubber Bumper can be used for the following range of Victron Energy Blue Smart IP65 Charger 12/10, 12/15, 24/8 Victron Energy Blue Smart IP65 Charger is already protected against dust, and water spray - now you can protect it from accidental damage too This rubber bumper protects your IP65 charger from knocks, bangs and scratches and helps extend its life Easy grip and shock absorbing construction Dimensions: 7.48 x 4.13 x 2.36 inches Weight: 0.31 lb This comes with 5 year Warranty Guarantee

Specially Designed For Maintenance Charging of Powersport Batteries Enable Charging on Vehicles Using CANBUS Technology Specially designed for maintenance charging of powersport batteries. Ensures a long and healthy battery life Optimises performance of your powersport battery

Charger Accessories / Battery Charge / Length of Cable 15 cm

The Oxford Solariser is a solar battery charger for maintaining 12Volt Automotive batteries all year round. A perfect companion when vehicles left outside or in remote lock-ups where the Solariser can be left outside or attached to a window or garage roof. LED light shows battery will charge with available light and is quick and easy to attach to the battery, simply by plugging into the cigarette lighter socket or with the permanent battery connection leads supplied.