Chargers & Jump Starters

Steel case with carry handle, this single phase charger features plenty of ventilation to help maintain low transformer temperatures. A large ammeter displays rate of charge and a dash-mounted fuse provides polarity protection in the event that clips are connected incorrectly. Rocker switches control variable output to the battery to maintain peak condition. Suitable for regular and low maintenance batteries.Specifications:Model No CHARGE115Brand: SealeyNett Weight: 8.90kgOutput: 12V/24VOutput Charge Peak(EN): 19A(15A)Battery Range: 20-250AhInput Charge: 0.4ACharging Rates: 2Supply: 230VPolarity Protection: Fuse (1 x 30A)Fuse: MF3010 (Pack of 10), CHARGE115.07 (Single)

Tough, durable, bend-resistant, non-flammable, 5 metre cable Mode 3, Type 2 to Type 2, 3, up to 32A, 3 Phase, up to 22kW Safe, high temperature resistant epoxy resin handles Strong synthetic carrier bag with velcro strips for non-slip storage CE, SGS approved

To charge lead acid batteries with liquid electrolyte: - 12V: from 35 to 210 Ah - 24V: from 20 to 100 Ah Ammeter to indicate the charge 2 charge speeds: Normal and “Boost” Copper wound transformer Clamp cables 1.5m & Power supply cable 1.3m Thermal protection of the transformer Protection against polarity reversal with a 20A automotive fuse at the front Isolated clamps Metallic casing Classsification: EN 60335-2-29

The HYSC-4000M is a SMART 230V battery charger from Hyundai. Designed for charging all types of 6V lead acid and 12V lead acid batteries including WET (Flooded) MF (Maintenance-Free) EFB (Enhanced Flooded Battery) GEL AGM (Absorbed Glass Mat) batteries. It is suitable for charging battery capacities from 1.2 to 130 amp-hours and maintaining all battery sizes. The HYSC-4000M features a built-in intelligent microprocessor making charging faster easier and safer. This chargers safety features including spark proof protection for reverse polarity short circuit overheat and overcharge. It also has auto-memory which returns the last selected mode when restarted (except repair modes).

Car Battery Charger / Battery Charge / Wall Mount / Protection Reverse Polarity / Length of Cable 500 cm / Protection Class IP21

Increases the grip on snow, sand, and unpaved ground Adjustable angle for use on uneven ground Foldable and therefore can be stored in the car with minimum space requirements Weight limit: 3500 kg each set. Material: polypropylene Size: 59 x 17.50 cm. Content: 2 pieces per set.

Extend the reach of your professional series battery charger and accessories. Add an additional 10-feet of length to any PRO X-Connect connection. Made from durable, heat stabilized 5 AWG silicone wire that maintains its flexibility in cold weather environments. Ultra-flexible silicone cabling - down to -40ºC - with protective nylon breaded shielding for maximum protection against abrasion. Compatible with NOCO GENIUSPRO50 Smart Battery Charger and NOCO GPA004 Battery Clamp Accessory.

Surprisingly small, but packs a powerful punch! The new Multi-function Jump Starter from Laser Tools (part number 7405) is an efficient and extremely compact emergency engine starting power pack. Packed full of features, it also features a bright LED to illuminate the work area, (flashing mode can be used as an emergency beacon), two USB outputs (for charging mobile phones, etc), a Type-C input/output port and a digital voltage display on the cable clamp adaptor. The unit and accessories are supplied in a convenient and protective case. The unit is charged from a suitable USB port on a PC, taking approximately three hours to fully charge. As it charges, the power/charging LED display will

Charger Accessories

Victron Energy Smart IP43 24-Volt 16 amp 85-250V (1+1) features 2 isolated outputs - The second output, limited to approximately 3 amp and with a slightly lower output voltage, is intended to top up a starter battery The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The char…

Protect your GBX45 jump starter with a lightweight, crush-resistant, anti-shock, and weather-resistant case. Made from a rugged and durable EVA material with a soft melange velvet lining for a secure, scratch-free fit. Secure enclosure with a durable, precision steel-rimmed zipper, a built-in reinforced handle, and custom over-molded pull tabs. Portable carrying case design that's compact and lightweight and fits in most glove boxes or compartments. Customized to fit the GBX45 UltraSafe Lithium Jump Starter, plus included accessories.

IDEAL FOR: 12V lead-acid (STD / AGM / GEL) batteries 12.8V / 13.2V LiFePO4 batteries. NEW Pb & LFP batteries without BMS CHARGING AMPS: 0.2A to 5A variable (Ampmatic)

Jump Leads / Case / Protection Overvoltage Protection / Length of Cable 500 cm

The Einhell CE-BC 15 M battery charger is an intelligent battery charger for 12V batteries, gel batteries, AGM, and zero and low maintenance lead-acid batteries with a maximum current strength of 15 amps The multi-stage charging cycle of the Einhell battery charger is automatically monitored and adjusted by the microprocessor controller. This also makes it suitable for all vehicle types, especially seasonal vehicles with long idle times The smart electronic control system analyzes the connected battery type and its condition, setting the optimum mode according to requirements. The trickle charge function protects and reduces the stress on the battery to maintain the optimal charge The trickle …

Innovative Heavy-Duty Connection System Compatible With Standard TM Connectors Reliable Weatherproof Connection 1/4" / M6 Ringlets Length: 50cm