Effects Pedals Behringer

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most soughtafter tube amp sounds – from clean to crunch to superfat distortion.
Type: Tube Amp Modeler;Distortion;Equalizer
Power Supply: Adapter
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Operation: Yes
UK/EU Power supply included: No
Made in: China
Type: Overdrive

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a singledigit LED display and an 11point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
Made in: China
UK/EU Power supply included: No

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a firstclass electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Type: Chorus
Power Supply: Adapter
UK/EU Power supply included: No
Made in: China
Battery Operation: Yes

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No
Type: Distortion;Overdrive

3-mode octaver effect pedal for electric bass guitar that allows for creating a monster sound by adding 2 additional tones using the guitar—1 and 2 octaves below the original tone. Pedal provides dedicated volume controls for all 3 tone types for awesome sound shaping, a flexible 3-mode Range switch that allows ultimate bass performance, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Made in: China
Type: Octaver
Power Supply: Adapter
Battery Operation: Ye…

The Behringer UT300 Ultra Tremolo Pedal offers up the vintage tremolo effects present in 50s and 60s amplifiers. Compact lightweight and easily transportable this handy stompbox fits excellently into your setup providing equally impressive tones. The tone can be sculpted with impeccable ease thanks to three dedicated controls including a Rate Wave and Depth allowing the creation of a multitude of unique sounds that infuse your performance with impeccable depth. Powered through a 9-volt battery you can easily check the status of your pedal with an on/off LED.

The Behringer UV300 Ultra Vibrato Pedal delivers vintage-inspired vibrato echoing the influence of the 60s and 70s. The vibrato pedal offers three separate settings to operate as well with unlatch bypass and latch which offer different opportunities for tonal creation. This tonal exploration doesnt stop there with dedicated Depth Rate Rise and Mode controls you can adjust every parameter of your sound to achieve your ideal setting. Utilising an active LED you can easily check the status of the pedal at any moment.

Analog bucketbrigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slapback echo. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and firstclass electronic on/off switch that offers noisefree operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Made in: China
Type: Delay;Echo
Battery Operation: Yes<&hellip;

Vintage-style phase shifter effect pedal for electric guitar that offers an authentic, classic three dimensional phase shifting - from rapid rotary speaker to impressive jet plane effects. It provides dedicated Rate control and separate Color switch for fine-tuning of effects speed and tone, a status LED for effect on/off and battery check and a true hard-wire bypass for ultimate signal integrity. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 142 x 79 x 86 mm. Weight: 380 g.
Type: Phaser;Rotary
Made in: China
UK/EU Power supply included: No

Pedal Design Foot Pedal

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Type: Preamp;DI Box
UK/EU Power supply included: No
Made in: China
Battery Detail: Al/Mn