Effects Pedals Behringer

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

The Behringer CL9 Compressor/Limiter Pedal allows you to balance every aspect of your performance. Ensuring each note rings at a similar volume consistently guaranteeing that quiet notes cut through the mix while louder and harsher notes are dampened to ensure that they arent lost within the performance. This allows you to play with subtle nuance while also having the peace of mind that each aspect of your playing is captured perfectly.

The Behringer BEQ700 Bass Graphic EQ allows guitarists to shape their perfectly desired bass tones with 7-band equalisation. Each band offers up to 15 dB of boost or cut and covers a frequency range from under 50Hz to over 10kHz letting you sculpt your sound over a wide range. The BEQ700 has an integrated status LED to show when the effect is on and the status of the battery life. The bass pedal operates on a 9-volt battery or the PSU-SB DC power supply (sold separately).

The Behringer UT300 Ultra Tremolo Pedal offers up the vintage tremolo effects present in 50s and 60s amplifiers. Compact lightweight and easily transportable this handy stompbox fits excellently into your setup providing equally impressive tones. The tone can be sculpted with impeccable ease thanks to three dedicated controls including a Rate Wave and Depth allowing the creation of a multitude of unique sounds that infuse your performance with impeccable depth. Powered through a 9-volt battery you can easily check the status of your pedal with an on/off LED.

The Behringer OD300 lets you combine and balance overdrive and distortion to find your ultimate dirt tone. This is achieved thanks to clever design inside are two separate circuits- 1 for overdrive and another for distortion (identical circuitry to a famous orange distortion pedal and yellow overdrive). The pedal then lets you blend these signals together with the added ability to tweak gain level and adjust tone for even more sonic adaptability. The end result is the most customisable dirt tone on the market.

The Behringer EQ700 Graphic Equalizer Pedal offers complete tonal shaping across the full range of frequencies. Either boost or cut each band up to 15dB providing your tone with the utmost customisation. You can highlight every critical frequency drawing out certain aspects of your guitar elevating chordal playing with scintillating highs or giving your riffs additional depth thanks to its range from 100Hz to 6.4kHz. Drawing out every aspect you can create the ideal guitar tone.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

The Behringer UV300 Ultra Vibrato Pedal delivers vintage-inspired vibrato echoing the influence of the 60s and 70s. The vibrato pedal offers three separate settings to operate as well with unlatch bypass and latch which offer different opportunities for tonal creation. This tonal exploration doesnt stop there with dedicated Depth Rate Rise and Mode controls you can adjust every parameter of your sound to achieve your ideal setting. Utilising an active LED you can easily check the status of the pedal at any moment.

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

The Behringer UC200 Chorus Pedal enhances every aspect of your guitars tone giving it additional richness thickening every aspect of the guitars sound with a chorus effect that can deliver stereo amazement. With individual controls for the Level Tone Rate and Depth you have an impressive amount of tonal shaping options. When the pedal is inactive you can be assured that your full signal integrity is upheld with maximum clarity and accuracy.

The Behringer VP1 Vintage Phaser Effects Pedal is an authentic 3-dimensional phase shifting pedal which provides you with everything from whirling speakers to impressive jet plane effects. Equipped with dedicated Rate and Tone controls the Behringer VP1 allows you to fine-tune the speed and tone - creating your own unique phasing effect.

The Behringer VD400 Vintage Analogue Delay is the perfect effect for generating the authentic delay sounds reminiscent of studios in the 1960s. Utilising three intuitive controls the pedals sound can be fully customised for any style and genre with adjustable Intensity Echo and Repeat Rate - it can be widely adjusted. Ranging from elastic delay to vintage slap-back echo the 300ms of true delay works brilliantly with an incredible noise reduction circuit.

The Behringer SF300 gives you every tool you need to create enormous fuzzy soundscapes. Utilising two separate fuzz modes and an additional boost you can create searing-hot sounds at any moment. Fuzz 1 breathes vintage character with a prominent midrange and a sparky sound. Fuzz 2 gives a modern-bass heavy tone which welcomes any style with its delightful warmth. Then you can crank everything up to the max with a +24dB gain. Its time to see what all the fuzz is about.

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

The Behringer BDI21 V-Tone Bass Preamp is a pedal that combines the features of an active DI (direct injection) box with Behringers proprietary tube emulation circuitry. The authentic V-Tone modelling technology is capable of producing everything from vintage tube tones funky slap sounds crunchy distortions and much more. The Presence control allows you to adjust the definition and upper harmonics while the 2-band EQ is perfect for shaping your own bass tone. Complete with a ground lift switch 1/4 TS and a gold-plated XLR connector the Behringer BDI21 V-Tone is suitable for both studio and live performance applications.

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

The Behringer ADI21 V-Tone Acoustic Preamp is designed to be used with guitars featuring piezo pickups and delivers a natural acoustic sound full of life. The acoustic preamp adds a richness to your overall acoustic performance and features an active direct injection box with proprietary mic emulation circuitry. A full three-band EQ and sweepable mids offer full tonal control whilst the blend control allows guitarists to mix their sound to reach their desired tones. The ADI21 is powered by a 9-volt battery or PSU-SB DC power supply (sold separately). If youre looking for a budget pedal which will vastly improve you live acoustic sound then look no further.

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.

The Behringer NR300 Noise Reduction Pedal is the perfect device for removing pesky hum from your mix caused by your pickups. Protecting your sound it ensures absolute clarity for crisp clean notes all of which have that unwanted background noise that is more synonymous with single-coils removed from its mix. A dedicated combination of threshold and decay controls that let guitarist alter their sound at any time for the perfect performance.

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

The Behringer TM300 Tube Amp Modeller Pedal offers a wide variety of sounds with up to 27 different configurations providing you with an almost unlimited amount of sound sculpting possibilities. With three classic amps a variety of different gain modes and alternative mic placements you can truly vary up your sound. Combine this with intuitive controls for both the EQ and drive and you can draw out the right frequencies within your mix.

The Behringer DR600 Digital Reverb pedal delivers excellent reverb both on stage and in recordings. With a set of designated controls you can fully customise the sound of this pedal to deliver the perfect sound for your mix. Offering stereo outputs you can create a wide soundscape comparable to some state-of-the-art processors. Including a true bypass system you can ensure complete tonal integrity whilst the pedal is inactive.

Elevate your sound and unlock a universe of sonic possibilities with the BEHRINGER FX600 Digital Multi-FX Processor. This compact yet powerful effects pedal is the ultimate secret weapon for any musician, whether on a concert stage or in a recording studio. Designed for guitarists, bassists, and keyboardists alike, the FX600 packs six of the most sought-after audio effects into a single, road-ready stompbox, eliminating the need for a cluttered and expensive pedalboard.Experience pristine, studio-grade audio fidelity thanks to the high-resolution 24-bit digital processing. This advanced technology ensures that your instrument´s core tone remains pure and articulate, while adding breathtaking l…