Drill Chucks Bosch

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again.The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- For Use With The Bosch Power Change Plus…

It has an SDS plus shank and is intended for use with all hammer drills with SDS plus fittings. The Universal Holder Standard Magnetic is a good choice for universal screw-driving applications. Its slim design offers easy handling for various tasks. A permanent magnet ensures a firm and secure grip of the bits in use. The Universal Holder is excellent for all fixing jobs requiring power tools.Universal holderwith permanent magnet and spring ring• Slim Design for Easy Handling• Universal Holder Standard Magnetic is a good choice for universal screw-driving applications• The slim design offers easy handling for various tasks• A permanent magnet ensures a firm and secure grip• …

Sds-Plus M16 Stem For Threaded CrownSpecifications:- Length: 105 Mm

The Diamond Wet Drill Bit delivers long life when drilling hard ceramics. Its high-class diamond coating makes the bit very robust and wear-resistant, allowing for extended usage. The product is intended for a variety of materials from soft wall tiles to very hard floor tiles such as fine stoneware. Do not drill in impact mode. Use water cooling when operating drills with this product. It is suitable for use with cordless drills. • Long Life for Hard Ceramics • Diamond Wet Drill Bit delivers long life when drilling hard ceramics • Highly robust and wear-resistant high-class diamond coating for extended usage Specifications: Diameter (D) mm: 12 Working length (L1) mm: 35 Materials: …

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Drill Set

Features:- Allows the use of holesaws in SDS plus hammers with a rotary stop- Fits threaded standard adapter.Specifications:- Metal pipes and profiles- Plastics- Wood with metal- Drywall

Bosch 2608577352 HSS PointTeQ Drill Set for Metal 1-13mm 25 Piece The Bosch 2608577352 HSS Drill set for Metal has 25 twist drill bits, fast drilling in metal due to PointTeQ tip design. The drill bits have self-centring tips which prevent wandering, making quick and easy drilling starts possible. Increased drilling rate generates less heat and wear keeping the tips sharper for longer and ensuring continuous durability. Features:
- Self-centring tip
- Sized from 1mm - 13mm
- PointTeQ tip design for fast drilling Specification:
- Sizes: 1 -1.5 - 2 - 2.5 - 3 - 3.5 - 4 - 4.5 - 5 - 5.5 - 6 - 6.5 - 7 - 7.5 - 8 - 8.5 - 9 - 9.5 - 10 - 10.5 - 11 - 11.5 - 12 - 12.5 - 13mm…

This drill bit has a hexagonal shank system and works with all drill drivers with a 13-mm chuck. The Auger Bit is ideal for fast drilling-accuracy when producing through-holes, pre-drilling for rafter nails and drilling deep dowel holes in wood. The heavy-duty self-feeding tip pulls the bit through completely, which allows for quick and effortless precision-drilling. Straight holes and a high chip removal rate and increased speed are made possible by the bit's optimised low-friction flute geometry with a solid centre. Its optimised scoring spur and precision-ground main cutting edge produce accurate holes. It is ideal for use in the ancillary building trades, for carpenters and roofers, and …

Milling Drills / 45 mm Drill Diameter / Cemented Carbide

The HSS Twist Drill Bit Cobalt provides long-lasting performance when drilling stainless steel. This extended lifetime results from a cobalt alloy content of 5% and fully ground HSS (high-speed steel), which provides excellent surface quality, wear resistance and heat protection. Equipped with two cutters and two flutes, chips are removed quickly to make the bit last even longer. This drill bit works with alloyed and non-alloyed steel, stainless steel, cast iron, cast steel and acid- and heat-resistant steels. The HSS Twist Drill Bit Cobalt is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect centring …

Milling Drills / 6.3 mm Drill Diameter / Cemented Carbide

Quick-change system for quick exchange of drill bits
Extension of 30.5 cm
With 1/4"-hex shank
Length: 305mm
2608587521

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

The CYL-3 Drill Bit provides lasting performance when drilling concrete. Its stamina is a result of a highly durable carbide blend specially developed and manufactured by Bosch. The blend is adapted to meet the demands of repeated use and offers high wear resistance when working with concrete. Moreover, the effective 2-flute U-shape design of the bit provides good dust removal, reducing friction, heat development and wear, resulting in an extended lifetime. The bit delivers lasting performance when drilling holes for fixings in abrasive materials such as concrete and natural stone. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing …

The SDS plus-7X Drill Bit provides an outstanding lifetime when drilling in reinforced concrete. Its full-carbide 4-cutter head is composed of the highest-quality carbide, which fortifies the head and provides exceptional impact resistance. Its consistent distribution of drilling power guarantees there is no power loss, which increases the overall lifetime. Bosch´s unique diffusion welding technology (IDS) provides a strong bond between head and flute. Moreover, the 4-flute design with wide channels reduces wear on the bit by allowing for effective dust removal. This bit is intended for hammer drilling in masonry, concrete and reinforced concrete. To achieve accurate results, the visibility o…

2608584063 6 piece bi-metal adjustable hole saw kit designed for cutting wood, PVC and aluminium. All blades are hardened with medium cut teeth, and a working length/depth of 32mm. Features and Benefits: Hardened medium cut teeth Suitable for cutting wood and PVC Also suitable for non ferrous metals such as aluminium and copper Set contents: 46, 53, 60, 67, 74 and 81mm.

The HSS Twist Drill Bit Ground is for drilling through metal with maximum precision. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. The HSS Twist Drill …

Wood Drill

Wood Drill