Drill Chucks 16 mm

IRWIN Blue Groove 6X Drill Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their Tri-Flute design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal breakout and the tapered flute reduces binding. The drill bits are also heat treated for extra durability.Diameter : 16 mm.Length : 165 mm.Additional Information:• Diameter: 16mm• Overall Length: 165mm• Pack Qty.: 1

Hole Saw / 16 mm Drill Diameter / Metal

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

The Forstner Bit delivers excellent lifetime for drilling accurate-fit holes. Its toothed-edge design creates less friction and heat for increased durability. The precision drill bit's short centring tip has two main and one periphery (toothed-edge) cutting edges for spot-on results. Equipped with large chip-free zones, which allow for optimised chip removal, the bit's fast drilling accuracy is further supported. It enables the smooth splinter-free drilling of blind holes as well as edge and slant drilling, e.g. fixing hinges, dowelling and the removal of knotholes. Use when drilling in soft and hard wood, veneered wood and non-laminated chipboard. The Forstner Bit's 3-sided shank prevents spinning …

High Performance Standard Drill With Morse Taper, Suitable For All Normal Drilling Work In Common Materials. High Resistance To Breakage. Cutting Angle: 118º. Spiral Angle: 20-30º. Ø-Tolerance: H8. Glossy Surface. Cut To The Right. Applications: For Alloyed And Non-Alloyed Steel And Cast Steel (Up To A Strength Of Ca. 900 N/Mm²), Gray Cast Iron, Malleable Cast Iron, Nodular Cast Iron, Pressure Cast Iron, Sintered Iron, Nickel Silver, Graphite Cast Iron, Aluminum Alloys, Bronze And Brass. Translucent Plastic Case With Blue Background Label.Specifications: - Ø (Mm): 16.00 - Overall Length (Mm): 218- Cutting Length (Mm): 120- Connection: Cm2

Powerful right-hand cutting high-performance drill with distinctive heat resistance. Ideal for drilling high-strength stainless, acid-resistant and heat-resistant steel. Ideally suitable for drilling larger drilling diameters on all commonly-used drilling machines with a clamping chuck up to 13,0 mm.Specifications:- Ø : 16,0 mm- Total length L1: 178,0 mm- DIN: 338- Material: HSSE-Co 5- Cutting direction: right hand cutting- Shank: reduced- Drilling depth: 5 x D- Point cut Shape C: Split point- Point angle: 130°- Helix angle: 25-30°- Tolerance: h8- Profile of flute: Normal- Core: Normal- Weight: 0,19000 KG

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon direct shank such as the RUKO magnetic-stand A10 drill.Specifications:- Ø: 16,0 mm- Total length L1: 63,0 mm- Shank: Ø 19,0 mm- For machines: A10 / RU25 / RU40- Material: HSS- Cutting: direction right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guidance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …

1.5/8" Bormax 2.0 Imperial Forstner Bit, 1622235 Premium quality,unique design disperses wood chips when drilling , Very accurate , Wave profile ensures no scortching of the hole. Rapid drilling in soft wood, European hard wood, chipboard, MDF etc. Rapid chipping of solid wood and chipboard. Less effort is needed for drilling., 1622, 162223500

The Keyed Drill Chuck is a simple and reliable solution for fixing drill bits for any type of job. It provides a consistently strong clamping force that securely fastens cylindrical or hex shank drill bits. Its jaws are conveniently tightened and loosened with a key, making it easy to handle. Keyed drill chucks are available with different mounts (1/2" - 20, 3/8"- 24, 5/8" - 16, B16, and SDS plus), for a wide range of capacities and are compatible with most common drills. Check technical details for information regarding impact resistance or suitability for anti-clockwise rotation. • Secure Drill Bit Clamping for Any Job • Keyed Drill Chuck is a simple and reliable solution for fixing …

• High carbon steel 16mm chuck and B16 arbor.• Suitable for Model No's GDM50B - GDM200F (Except GDM180B).High carbon steel 16mm chuck and B16 arbor. Suitable for Model No's GDM50B - GDM200F (Except GDM180B). Hand tightening of chuck collar grips drill bit securely with three high carbon steel jaws.• High carbon steel 16mm chuck and B16 arbor. • Suitable for Model No's GDM50B - GDM200F (Except GDM180B). • Model No. GDMX/KCTechnical Specification:Application(s): GDM Series Pillar Drills (GDM50B - GDM200F [Except GDM180B])Chuck Capacity: 16mmNett Weight: 0.83kgDimensions: Length: 55mm x Height: 53mmWeight: 0.857KgWarranty: 1 year

• Suitable for PDM Series drilling machines with a JT3 arbor.Suitable for PDM Series drilling machines with a JT3 arbor.• Suitable for PDM Series drilling machines with a JT3 arbor. • Model No. PDM/KCTechnical Specification:Application(s): PDM Series Pillar DrillsChuck Capacity: 16mmNett Weight: 0.83kgDimensions: Length: 99mm x Height: 50mmWeight: 0.86KgWarranty: 1 year

Rohm PRIMA heavy industrial plain bearing chucks are widely used for stationary and hand operated percussion drilling machines. These industrial quality chucks have fully hardened and ground working components which offer exceptionally high accuracy, gripping power and durability. The Rohm PRIMA 16mm Keyed Drill Chuck with female mount JAC3, a heavy industrial plain bearing chuck, is widely used for stationary and hand operated percussion drilling machines. These industrial quality chucks have fully hardened and ground working components which offer exceptionally high accuracy, gripping power and durability. Specifications: Capacity: 16mm.Additional Information:• Type: Chuck• Keyed/Keyless: …

SUPRA precision industrial keyless chucks are specifically designed for high accuracy. A self tightening feature produces significantly higher gripping force to resist tool shank slippage. Available with taper or threaded mount.The Rohm SUPRA 16mm Keyless Chuck female mount JAC6 is a precision industrial chuck specifically designed for high accuracy. A self tightening feature produces significantly higher gripping force to resist tool shank slippage. Available with taper or threaded mount. Specifications: Capacity: 16mm.Additional Information:• Type: Chuck• Keyed/Keyless: Keyless