Power Saws

Insulated Hacksaw Frame. Blade Length: 300mm/12".

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

Rotabroach Mini Cutters cut clean, burr-free holes in seconds. Features and Benefits: Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. Precision ground M2 high Speed Steel Over 3 times faster than standard twist drills making them highly economical. Low power consumption giving a long life to cordless drills. Typical Applications: The professional solution for cutting clean accurate holes in sheet metal, pipes and plastics.

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

• Composite handle with comfortable rubberised grip.• Lightweight metal frame with integral blade storage facility.• Multi-angle adjustment for fast and accurate cutting.• Supplied with high carbon steel blade suitable for cutting a variety of materials.• Lifetime guarantee*.Composite handle with comfortable rubberised grip. Lightweight metal frame with integral blade storage facility. Multi-angle adjustment for fast and accurate cutting. Supplied with high carbon steel blade suitable for cutting a variety of materials.• Composite handle with comfortable rubberised grip. • Lightweight metal frame with integral blade storage facility. • Multi-angle adjustment for fast and accurate cutting. • Suppl…

• Robust composite frame with comfortable rubberised grips.• Features integral blade storage facility and quick change blade mechanism.• Multi-angle adjustment for fast and accurate cutting.• Supplied with high carbon steel blade suitable for cutting a variety of materials.• Lifetime guarantee*.Robust composite frame with comfortable rubberised grips. Features integral blade storage facility and quick change blade mechanism. Twin blade positions (45° and 90°) for comfortable and accurate cutting. Supplied with high carbon steel blade suitable for cutting a variety of materials.• Robust composite frame with comfortable rubberised grips. • Features integral blade storage facility and q…

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Starrets Fast Bi-Metal Hole Saws: The Electrician's Top Choice for Precision Holes Unrivaled cutting performance with these Fast Bi-Metal Hole Saws, seamlessly integrating the proven Dual Pitch Hole Saw tooth design with advanced extra cobalt High-Speed Steel (HSS) teeth. Enhanced heat and wear resistance, making it the ultimate choice for various materials, including metals, wood, plastic, plaster, and more. Aggressive material penetration and optimal kerf clearance. Unleash the versatility of this multi-purpose hole saw, designed to penetrate deep into solid materials or tubes with a wall thickness exceeding 3mm. The hole saw depth delivers exceptional cutting performance. Tooth material that …

High-hardness, carbide tipped teeth with a triple chip tooth grind, ideal for use on PVC, wood, fibreglass, ABS and materials that are too hard and abrasive for regular steel holesaws. The cutting depth is 41mm (15/8). Saws have 3TPI constant pitch teeth. Holesaw and Arbor sizes: 14-30mm - use Arbor K1 or K4. 32-210mm - use Arbor K2 or K10.

The ALMCH064 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guide bar slot 0.325 mm and Low profile (L/P) 1.1 mm guide bar slot. This chain is made to fit the Husqvarna / Mountfield ranges and suit saws with a 40cm bar and chain with 64 drive links including:136, 137, 141, 142 / MC382

Expert Tough Material For Long Life Cutting Holes In Multi Material: Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again. The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features:- Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teet…

Bosch Bi-Metal Hole Saws:The Bi-Metal Hole Saw Offers Smooth Cutting Through Various Materials. The Tooth Configuration (Vario Tooth Strip) Is Ideal For Gliding Through Material To Provide Smooth Cuts. Made Of Bi-Metal Hss (High-Speed Steel) Containing 8% Cobalt Alloy, This Hole Saw Has Less Risk Of Tooth Breakage And Higher Heat Resistance For Long-Lasting Cutting. Use This Hole Saw When Cutting Through Wood, Metal And Plastics The Bi-Metal Hole Saw Fits All Standard Adapters On The Market.

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

The Bosch S1227BEF Endurance Reciprocating Saw Blades have a patented 2x2 fine tooth pitch geometry for easy cutting of Heavy Metal
The Bosch S1227BEF Endurance for Heavy Metal Reciprocating Saw Blades delivers precise and smooth straight cuts in metal. Suited to medium-thick to thick sheet metals (3-8 mm), thin-walled closed and open profiles and pipes (

355mm diameter
3mm thickness
A36PBF grit
Pack of 5
Do Not Use With Petrol Cutters