Chargers & Jump Starters

• Suitable for 12V & 24V electrical systems. • Fully electronic, microprocessor controlled.• Suitable for EFB & AGM/GEL (stop/start), Lead Acid, Lead Calcium & Silver Calcium batteries.• Battery Range: 4-350Ah.• Up to 10 analysis and charge phases, including trickle/maintenance.• Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology.• Surge and spike protection during charging and starting.• BSU mode provides support for the battery during prolonged electronic diagnostic checks.Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suit…

Victron Orion-TR, DC to DC isolated power converter 12/24-15 (360W) with a DC to DC converter you can stabilize the DC voltage coming from a power supply, or battery obtaining a higher, equal or lower voltage than the input voltage.Features:Remote on/off switch.Due to the remote on-off switch.The need to mount a high current switch in the input wiring is eliminated the remote on-off switch can be operated by a low-power switch or, for example, with the motor start/stop switch (see manual).Adjustable output voltage:can also be used as a battery charger.For example, to charge a 12-volt starter or service battery integrated in a 24 V system.All models are short-circuit proof and can be connected …

• Cable & Clamp Length: 1m.• Produces in excess of 1600 Peak Amps.• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• LED Battery condition and charge indicators.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst mains charging.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. • Supplied with mains charger.Composite case with integral battery clip storage hoods and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up …

Argo Fet 200A - 1E/3S Load Distributor.

The Sealey START420 Starter/charger for professional garages, workshops and body shops The Sealey START420 is a heavy-duty charger and starter designed for use in professional garages and workshops. It can be used for anything from cars to commercial vehicles. Thanks to its large wheels, it can be easily manoeuvred around the site.  Features:
- 3 Phase
- Caters for all requirements from cars right up to light commercial vehicles
- Heavy-duty starter/charger for professional garages, workshops and body shops
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control Specification:
- Supply: 240V
- Output: 12/24V <&hellip;

Take this water, dust, and chemical resistant charger with you wherever you go, whether it's on your boat, yacht, classic car, motorcycle, camper-van, or workshop. The Victron Energy Blue Smart IP65 Charger is the perfect solution for all your battery charging needs. Experience the ultimate power and convenience!
This professional and innovative and battery charger is equipped with a built-in Bluetooth feature. Using the Victron Connect app, you can adjust charging settings and monitor real-time and historic battery charging data
With its 7-step charging algorithm, this charger will provide the perfect balance of power your battery needs to maximize its performance and ensure a longer life …

Convert your older TecMate or British charger battery cable to SAE connector with weather protected sleeve and cap!
Length=6″/15cm.
-40°C/-40°F very low temperature use.
Cable max. rating: 5 Amp. 15A fuse.
KET 2 pole connector with locking clip converts to an industry standard 2-pin SAE connector.

Protect your GB70 jump starter with a lightweight, crush-resistant, anti-shock, and weather-resistant case.
Made from a rugged and durable EVA material with a soft melange velvet lining for a secure, scratch-free fit.
Secure enclosure with a durable, precision steel-rimmed zipper, a built-in reinforced handle, and custom over-molded pull tabs.
Portable carrying case design that's compact and lightweight and fits in most glove boxes or compartments.
Customized to fit the GB70 UltraSafe Lithium Jump Starter, plus included accessories.