United Kingdom
Catalog   /   Automotive   /   Parts & Car Electronics   /   Chargers & Jump Starters

Chargers & Jump Starters

 prices on 739 models  
Show
Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for AGM/GEL, Lead Acid, and Lead Calcium as well as stop/st more→art batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases and suitable for 12V & 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during charging and starting, preventing damage to vital …
Dual purpose smart charger for use with our range of E/START digital models. Will fully charge the unit within 5 minutes. Converts any compatible E/START unit into a 12V battery charger.
The new chargers of the SBC NRG + MINI series are even more efficient and compact thanks to new advances in technology. The redevelopment of the SBC NRG + charger allows 15% more output power than the more→industry standard, because it uses the injected current with almost no loss. They are used everywhere, where smaller power with small dimensions are needed. Thanks to the temperature-dependent ventilation system, the chargers not only quieter, but also protect your on-board battery at the same time.
3-stage charging curve IUoU
2 or 3 charging outputs for independent charging of several batteries by integrated charging current distributor (MosFet technology)
Each output is protected with integrated …
Composite case with integral battery clip storage and carry handle. Suitable for starting 4 cylinder petrol or diesel engines up to 2L. LED Battery condition and charge indicators. Test cycle button g more→ives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.
Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 4 cylinder petrol or diesel engines up to 2L. Front panel displays internal battery charge leve more→l and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.
Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicato more→rs. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Also features an integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.Specifications:Model No RS132Auxiliary Output: 2 x 12V Power …
Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicato more→rs. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED worklight for use at night. Also features integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V?1A). Supplied with mains charger. Features & Benefits: • Cable and Clamp Length: 0.72m. • Comp…
Sealey RoadStart Emergency Power Pack complete with mains charger and double plug in-car charging The Sealey RS131 is an emergency jump starter, designed to provide power to vehicles in the case of ba more→ttery shortage. This model is fitted with a 12V power socket that will accept any 12V device fitted with a vehicle accessory socket plug and two 5V/2.1A USB outlets for phones and tablets. Features:
- LED Battery condition, polarity check and charge indicators
- Composite case with moulded rubber protection, integral battery cable storage and carry handle
- Fitted with a 12V power socket that will accept any 12V device fitted with a vehicle accessory socket plug and two 5V/2.1A USB outlets …
Composite hi-vis green case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and ch more→arge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.
Composite case with battery clip storage lugs and carry handle. Suitable for starting vehicles at 12V with 8 cylinder petrol engines up to 8L and 6 cylinder diesel engines up to 6L. 24V with 8 cylinde more→r petrol engines up to 4L and 6 cylinder diesel engines up to 3L. Easy-to-read, colour-coded analogue gauge measures battery condition and charge indicator. Audible warning system for polarity protection. Positive cable fitted with protection against reverse charging from the vehicle. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with a power socket that will accept any 12V device with …
Composite case with integral battery clip storage and carry handle. Suitable for starting 12V vehicles with 8 cylinder petrol engines up to 6L and 8 cylinder diesel engines up to 4.8L. Suitable for st more→arting 24V vehicles with 6 cylinder petrol engines up to 3.5L and 6 cylinder diesel engines up to 3L. Two batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents. Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V. LED Battery condition indicators. Test button gives indication of battery condition. Fitted with 12V power socket that will accept any 12V device with a vehicle …
Composite case with integral battery clamp storage and carry handle. Suitable for starting 12V vehicles with 8 cylinder petrol engines up to 6L and 8 cylinder diesel engines up to 4.8L. Suitable for s more→tarting 24V vehicles with 6 cylinder petrol engines up to 3.5L and 6 cylinder diesel engines up to 3L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.
Composite case with integral battery clip storage and carry handle. Suitable for starting vehicles with eight cylinder petrol engines up to 5L and six cylinder diesel engines up to 3.5L. Two batteries more→connected in parallel give high peak and cranking currents. LED Battery condition indicators. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.
Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 8 cylinder petrol engines up to 5L and 6 cylinder diesel engines up to 3.5L. Front panel displa more→ys internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.
Composite case with integral battery clip storage hoods and carry handle. Suitable for starting vehicles with six cylinder petrol engines up to 3.5L and four cylinder diesel engines up to 3L. LED Batt more→ery condition and charge indicators. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger.
Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4 cylinder diesel engines up to 3L. Front panel displa more→ys internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output.
Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles. Positive action power switch reduces risk of inadverten more→t damage by over-voltage. Heavy-duty copper cables provide efficient power transfer. Twin trips prevent damage to battery or internal circuitry. Easy-to-read LED battery indicator to IEC 51 provides fast indication of batterys state of charge. Surge and spike suppressing circuitry reduces risk of damaging vehicles on-board electronics. Fitted with charge balance circuitry to provide even charge to integral batteries. Supplied with mains voltage recharge unit.
Housed in tough composite case, this unit is designed to prevent damaging voltage spikes and surges reaching delicate vehicle electronics. Clips across the battery terminals and permits processes such more→as welding and plasma cutting to be carried out without the danger of damaging the vehicle’s onboard electronics. Fitting recommended before any routine workshop maintenance. Shows red light for fault. Fitted with heavy-duty, fully insulated battery clips. Features & Benefits: • Fits across battery to protect against voltage surges. • Ideal when welding, cutting and jump starting. • Protects coded radios, alarms, ECUs, fuel tank senders and much more. • Fitted with heavy-duty, fully insulated …
Housed in tough composite case, this unit is designed to prevent damaging voltage spikes and surges reaching delicate vehicle electronics. Clips across the battery terminals and permits processes such more→as welding and plasma cutting to be carried out without the danger of damaging the vehicle’s onboard electronics. Fitting recommended before any routine workshop maintenance. Shows green light when operating correctly and red light for fault. Fitted with heavy-duty, fully insulated battery clips. Features & Benefits: • Fits across battery to protect against voltage surges. • Ideal when welding, cutting and jump starting. • Protects coded radios, alarms, ECUs, fuel tank senders plus much more. • …
Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles. Positive action power switch reduces risk of inadverten more→t damage by over-voltage. Heavy-duty copper cables provide efficient power transfer. Twin trips prevent damage to battery or internal circuitry. Easy-to-read LED battery indicator to IEC 51 provides fast indication of batterys state of charge. Surge and spike suppressing circuitry reduces risk of damaging vehicles on-board electronics. Fitted with charge balance circuitry to provide even charge to integral batteries. Supplied with mains voltage recharge unit.
Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles. Positive action power switch reduces risk of inadverten more→t damage by over-voltage. Heavy-duty copper cables provide efficient power transfer. Twin trips prevent damage to battery or internal circuitry. Easy-to-read LED battery indicator to IEC 51 provides fast indication of batterys state of charge. Surge and spike suppressing circuitry reduces risk of damaging vehicles on-board electronics. Fitted with charge balance circuitry to provide even charge to integral batteries. Supplied with mains voltage recharge unit.
Manufactured with professional grade, high performance AGM battery, produced in the USA and specially formulated to jump start vehicles. The only range of DEKRA approved emergency jump starters on the more→market. Supplied with an automatic maintenance charger that features patented microprocessor controlled speed charging, with thermal runaway protection. This means that unlike other booster packs, the unit can be left safely on charge continuously ensuring it is always ready for use. Fitted with an isolating rotary on/off switch and features a 2-function digital display showing the internal battery level and the vehicle battery voltage. Fitted with a 12V accessory socket and a single 2.1A USB port …
Manufactured with professional grade, high performance AGM battery, produced in the USA and specially formulated to jump start vehicles. The only range of DEKRA approved emergency jump starters on the more→market. Supplied with automatic maintenance charger that features patented microprocessor controlled speed charging, with thermal runaway protection. This means that unlike other booster packs, the unit can be left safely on charge continuously ensuring it is always ready for use. Fitted with an isolating rotary on/off switch and features a two-function digital display showing the internal battery level and the vehicle battery voltage. Fitted with a 12V accessory socket and a single 2.1A USB port …
22Ah Professional grade, high output AGM battery especially formulated to jump start vehicles. Fully sealed battery enables the unit to be stored in any position. Features a lightweight, high impact c more→asing, which is durable and corrosion proof for easy portability. Battery status LEDs indicate to the user when the battery is at full power, 75% charge, 50% charge or less and when the unit needs to be recharged. A fusible link integrated in the output cable gives increased protection to the unit, while enabling fuse change without disassembly. On/off switch for safety and control. Features 12V accessory outlet including overload and short circuit protection.
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Product type
Сharger type
Compatible batteries
Battery voltage
Rechargeable battery capacity
Built-in battery
Charging current regulation
Max. charging current
Max. starting current
Battery charging functions
More features
Power supply
Weight