Chargers & Jump Starters

Fully automatic microprocessor controlled battery charger and maintainer featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid calcium AGM/GEL leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged maintained and ready to use. This unit also features a 10A power supply mode for maintaining battery power during prolonged periods of power draw for example when a vehicle is on display in a showroom etc.Schumacher® 15A 12V

Jump Leads / Length of Cable 350 cm

Suitable for 6V and 12V lead-acid (SLI, Gel, EFB, AGM) and Li-ion batteries 6A charging power and up to 30% fast charging thanks to RF MCU control Real-time power monitoring and smart microprocessor technology for automatic voltage and current RPA22rerere0232023Precise and gentle charging with diagnostic, rescue and maintenance function and auto start function after power failure Compact housing with integrated LCD display, hook attachment, non-slip housing base and convenient 1-button operation. 1.5 metre cable, comfort plug and speed connect system for quick cable change. Power supply (power supply e.g. when changing batteries) and IP65 dust and water protection

For Telwin welding machines Compatible with other brand welding machines Suitable for Co2 and Argon Gauge scale 0-315 Bar. flow meter scale 0 - 12 L/min Can be used with refillable cylinders

Specifically designed to charge all types of 12v lead batteries in cars, vans, camper vans etc. Designed for 12 V batteries from 1.2 to 250 ahr and charging capacity from 20 to 250 Ah (330 Ah in charge maintenance) Fully automatic and intelligent charging curve in 8 steps (50% faster than a traditional charger) Total protection: against short circuits, reverse polarity and overloads and protection of the vehicle’s on-board electronics Compact, lightweight design and sealed against dust and liquids (IP65) Improves battery longevity thanks to “Refresh” mode Recovers even deeply discharged batteries (SOS Recovery) Equipped with a high sensitivity sensor for adjustment automatic charging parame…

Victron Energy Blue Smart IP22 12-Volt 20 amp 230V with 3 Output is the new professional battery charger with wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available The Blue Smart Charger features a microprocessor controlled adaptive battery management, The adaptive feature will automatically optimize the charging process relative to the way the battery is being used High efficiency and also Protected against overheating: With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard Also charges Li-ion batteries: Li-ion batteries are charged with a simple bulk …

The Clarke IBC20 is suitable for use with all types of 12V/24V lead acid batteries and can deliver up to 20A of charging. This unit benefits from a handy boost feature (12V) for faster charging and vehicle starting and this model can also charge batteries up to 400Ah in size.With LED colour indicators reverse polarity and overcharge protection this is a capable compact and lightweight charging solution.

- Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining battery life according to current consumption Programmable relay to turn off non-crucial loads, or to start a generator if necessary. - A 500 amp quick connect shunt and a connection kit

Compatible: CTEK MXS 3.6, MXS 5.0, MXS 5.0 Polar, MXS 5.0 Test&Charge Tough: hardwearing silicone bumper, designed and tested in Sweden Non-slip: Will help the charger grip on angled or slippery surfaces Enhanced grip: For easier handling of your CTEK charger Protects: Strong defence against accidental drops, scrapes and scratches. Easy to fit: this snug-fitting bumper is lightweight, flexible and simple to get on and off.

An easy to carry heavy duty charger suitable for all types of 12V & 24V lead-acid batteries. The multiple intelligent charging stages diagnose recover maintain and condition the battery. Also featuring an alternator check to identify the output percentage of the vehicles charging system.Please note – Not Suitable for Lithium ion & Li-Po batteries- Suitable for 12V lead-acid batteries up to 500Ah and 24V up to 240Ah- 8 intelligent charging steps including desulphation to restore battery capacity- Digital illuminated screen display. Automatic battery voltage detection- Boost feature (12V) for faster charging and vehicle starting- Reverse polarity and overcharge protection. Anti-spark

Car Battery Tester

The Optimate Extension Leads enable OptiMate Chargers to be used further from the vehicle or battery.Simply plug one end into the outlet lead of the OptiMate and the other end into the accessory cable (e.g. eyelet lead as supplied with OptiMate, or other SAE accessory). Heavy-duty cables help to prevent Voltage drop.O33 OptiMate SAE - 1m (MTXO33)This is a 5 Amp low temperature rated charger extension lead with weather protected SAE connection system.Innovative heavy-duty connection systemCompatible with standard SAE connectorsReliable weatherproof connectionThick copper 18 SWG cableLength: 100cmWarranty: 3 yearsO13 OptiMate SAE - 4.6m STD (MTXSAE-73)This is a 5 Amp charger extension

Bluetooth Smart enabled Fully programmable, Remote on-off All models are short circuit proof and can be paralleled to increase output current High temperature protected, IP43 protection Screw terminals, Input fuse (not replaceable)

Multi-voltage Charger with 230V Power Supply Designed to charge all Type of vehicle batteries 6V, 12V and 24V Protection of the vehicle’s on-board electronics Delivered with clamps and connection terminals Charging capacity from 1.2 to 125 Ah (170 Ah in charge maintenance) in 6/12 V Charging capacity from 15 to 100 Ah (140 Ah in charge maintenance) in 24 V Even recovers batteries deeply discharged (SOS Recovery) Fully automatic and intelligent charging curve in 7 stages (50% faster than a traditional charger) Compact, lightweight design and sealed against dust and liquids (IP65) Total protection: against short circuits , polarity inversions and overloads

Victron Energy Cyrix-Li-Charge will connect a battery charger with 3 seconds delay. Victron Energy Cyrix-Li-Charge will disengage immediately whenever its control input becomes free floating, signalling cell over voltage or cell over temperature In general, a cell over voltage alarm will reset shortly after charging has been stopped. Victron Energy Cyrix will then reconnect the charger after a delay 3 seconds When Victron Energy Cyrix-Li-Charge is engaged (charger connected to battery) it will disengage after 1 hour to check if the charger is still enabled If, after the Victron Energy Cyrix has disengaged, the output of the battery charger immediately increases to 13 V or more, Victron Energy …