Voltage Monitoring Relays

x

SOCKET & CLIP, PCB, 5MM, RELAY Approval Category:UL 94V-08 Current Rating:10A No. of Pins:8Pins SVHC:No SVHC (15-Jan-2019) Socket Mounting:Through Hole Socket Terminals:Through Hole Voltage Rat more→ing:250V Accessory Type:Socket / Clip Approval Bodies:CSA, SEA, UL

BASE FOR 4061 & 4052 SERIES RELAYS Operating Temperature Min:-40°C Current Rating:10A Accessory Type:Mounting Base External Depth:15.5mm External Length / Height:46.8mm External Width:81.9mm Fo more→r Use With:40 Series Relay IP / NEMA Rating:IP20 Operating Temperature Max:70°C

RELAY, PCB 10A SPCO 24VDC Contact Current AC Max:10A Coil Resistance:1.2kohm Contact Configuration:SPCO Approval Bodies:BEAB, CSA, DEMKO, IMQ, SEMKO, NF-USE, SETI, SEV, UL, VDE Approval Category: more→BEAB, CSA, DEMKO, IMQ, NF-USE, SEMKO, SETI, SETI, SEV, UL, VDE Coil Current:20mA Coil Operating Lower Percent Limit:80% Coil Operating Upper Percent Limit:150% Coil Voltage VDC Nom:24VDC

RELAY, PCB 5A DPCO 6VDC Contact Current AC Max:8A Coil Resistance:55ohm Contact Configuration:DPDT Approval Bodies:BEAB, CSA, DEMKO, IMQ, SEMKO, NF-USE, SETI, SEV, UL, VDE Approval Category:BEAB, more→CSA, DEMKO, IMQ, NF-USE, SEMKO, SETI, SETI, SEV, UL, VDE Coil Current:109mA Coil Operating Lower Percent Limit:80% Coil Operating Upper Percent Limit:150% Coil Voltage VDC Nom:6VDC

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Applicable with 3-phase loads. Replaceable pow more→er element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned possibly by an excessive flow of current, in which case, dismount the damaged cartridge for

Works with different types of switches and buttons.

This PowerTag Energy M630 3P is a wireless communication energy sensor. With its Monoconnect design, it is dedicated to Compact NSX 400/630, Compact NS 400/630 and TeSys GV6. It has to be associated w more→ith a concentror or a gateway to provide circuit monitoring and diagnosis down to load level. It is designed specifically for Energy Management, Load Monitoring and Power Availability applications. It incorporates accurate real-time measurements of active, and reactive energy, active, reactive and apparent power, current, voltage and power factor. In case of power outage, it sends a voltage loss alarm and the current-per-phase value before being de-energized Energy sensor that provides accurate …

BASE FOR 11 PIN PLUG-IN For Use With:60 Series Relay Colour:Blue External Depth:26mm External Length / Height:67mm External Width:38mm

Single-phase SSR for low heat generation, enables carrying 25 A (G3PJ-[]25B(-PU)) even for close mounting of three SSRs to contribute to downsizing of control panels.