Voltage Monitoring Relays

x

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking terminals. more→(Except for G3PA-260B-VD and G3PA-450B-VD-2). Applicable with 3-phase loads. Replaceable power element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned

Easy and fast installation thanks to wireless technology Intuitive and simple commissioning through embedded web page or EcoStruxure Power Commission Monitor electrical loads from a computer and be more→notified by email notification through a Local Access Network (LAN) reduce footprint and less wiring thanks to wireless communication devices Get access to data in the way you need, with local display and web page (instant values)

RELAY, POWER, PCB, 12V DC, 6A, SPDT-CO Relay Terminals:Solder Coil Resistance:720ohm Coil Voltage:12VDC Contact Configuration:SPDT Contact Current:6A Contact Material:Silver Cadmium Oxide Conta more→ct Voltage VAC:250VAC Product Range:32 Series Relay Mounting:Through Hole

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking terminals. more→(Except for G3PA-260B-VD and G3PA-450B-VD-2). Applicable with 3-phase loads. Replaceable power element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned

RELAY, PCB 10A SPCO 24VDC Contact Current AC Max:10A Coil Resistance:1.2kohm Contact Configuration:SPCO Approval Bodies:BEAB, CSA, DEMKO, IMQ, SEMKO, NF-USE, SETI, SEV, UL, VDE Approval Category: more→BEAB, CSA, DEMKO, IMQ, NF-USE, SEMKO, SETI, SETI, SEV, UL, VDE Coil Current:20mA Coil Operating Lower Percent Limit:80% Coil Operating Upper Percent Limit:150% Coil Voltage VDC Nom:24VDC

Extremely thin relays integrated with heat sinks. Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking terminals. more→(Except for G3PA-260B-VD and G3PA-450B-VD-2). Applicable with 3-phase loads. Replaceable power element cartridges. Complies with VDE 0160 (finger protection), with a dielectric strength of 4,000 V between input and load. Complies with VDE 0805, IEC 950. Certified by UL, CSA, and VDE (reinforced insulation). The G32A-A Power Device Cartridge (a Triac Unit) can be replaced with a new one. When the temperature indicator has changed from pink to red, the triac circuitry may have malfunctioned

This PowerTag NSX 250A is an energy sensor with wireless communication for 3P+N electrical networks. With its Monoconnect design, it is dedicated to Compact NSX 100/160/250, Compact NS 100/160/250, Co more→mpact INS250 and Compact INV 100/160/200/250. It has to be associated with a concentror or a gateway to provide circuit monitoring and diagnosis down to load level Energy sensor that provides accurate real-time measurements and energy values. The Performance category is Class 1. The Imax maximum current is 250A. The Ib Base current is 40A. The Saturation current is 500A and the Ist Starting current is 160mA. The Un Rated voltages are Phase-to-neutral 230VAC +/- 20 Percent and Phase-to-phase 400VAC …

Easy and fast installation thanks to wireless technology Intuitive and simple commissioning through embedded web page or EcoStruxure Power Commission Monitor electrical loads from a computer and be more→notified by email notification through a Local Access Network (LAN) reduce footprint and less wiring thanks to wireless communication devices Get access to data in the way you need, with local display and web page (instant values)

Smart Mini Relay Lightwave

RELAY, PCB 16A SPCO 12VDC Contact Current AC Max:16A Coil Resistance:300ohm Contact Configuration:SPCO Approval Bodies:BEAB, CSA, DEMKO, IMQ, SEMKO, NF-USE, SETI, SEV, UL, VDE Approval Category:B more→EAB, CSA, DEMKO, IMQ, NF-USE, SEMKO, SETI, SETI, SEV, UL, VDE Coil Current:40mA Coil Operating Lower Percent Limit:80% Coil Operating Upper Percent Limit:150% Coil Voltage VDC Nom:12VDC

Industrial Control Plug-In Relays Plug-In 2CO c/w LED 5A 120V Relays - Plug-In