Model Building Kits

A Fine model celebrating the 'Mighty River's' Steam Boats of the 1870 to 1920's. Made famous by the stories of Mark Twain. Superbly detailed model - features many brass castings and etchings, with pre-cut laser parts. Hull construction in Walnut and Lime double planked. This model lends itself to exterior and interior illumination. Scale: 1:50 Length 1050mm Model Makers Glue Pack Contains: Deluxe Materials Speed Bond 112g Deluxe Materials Roket Max Thick Cyano (Super glue)

Mantua Models Sergal Cutty Sark Kit 789 Scale 1:78 Length 1150mm The “Cutty Sark” was built at Scott and Lintons yard, Dumbarton, Scotland in 1869 for the traffic with the far South East and Africa. She was designed to rival the “Thermopylae”, one of the finest clippers ever built, which she did for many years. She now resides at the National Maritime Museum,Greenwich. A plank on frame construction, the kit contains:- Building plans with general details, English instructions, lost wax brass castings, walnut or lime planking, wooden masts and spars, brass and walnut fittings, etched brass details, rigging cord, copper plates for the hull. All sheet ply sections are laser cut for accuracy. Option…

RC Buggy / Scale 1:10 / RTR (Ready-to-Run) / Brushless

RC Monster Truck / Scale 1:10 / RTR (Ready-to-Run) / Brushless

RC Monster Truck / Scale 1:10 / RTR (Ready-to-Run) / Brushless

Billing Boats 1:15 Scale Colin Archer Model Boat Kit RS 1 was built in 1893 for the "Norwegian Society for Shipwreck Salvage" at the Colin Archer shipyard in Rekkevig near Larvik, Norway. RS 1 was later named "Colin Archer" after its designer and builder. RS 1 was built in 1893 for the "Norwegian Society for Shipwreck Salvage" at the Colin Archer shipyard in Rekkevig near Larvik, Norway. RS 1 was later named "Colin Archer" after its designer and builder.The large scale Billing Boats model of the Colin Archer is suitable for remote control installation. Each model kit is equipped with a numbered and signed certificate. Scale 1:15 Length 127cm Beam 33cm Height: 133cm The Billing Boats …

Steam Engine

Locomotive / Railway Company PKP - Poland / Era III (1949 - 1970)

w/tracking number by JP post Tamiya 1/6 Collectors Club Special 1/6 Honda CB750 Racing (semi assembled model) 23210

Jonny is a compact and manouverable vessel for anyone who likes modern tugs. The spacious and strong GRP hull has a perfect finish and comes with markings to indicate the location of openings in the hull. The model comes with two prop shafts and rudders, Kort nozzles are optional. A conversion to Schottel units is possible and described in the building instructions. Parts are include to convert the model to represent a typical offshore tug. The working deck is equipped with a laser-cut deck with planks engraved in the surface. The detailed wheelhouse has complete interior furnishing and can be detailed according to the modeller’s desire. Two water cannons are included which can be equipped to…

Gaugemaster Prodigy Advance2 Starter Package PRODIGY ADVANCE2 consists of three elements. The POWER PACK transforms the power from your mains socket ready for the Base Unit. The BASE UNIT is the brains behind the operation. It contains all the technology you need to send DCC commands to your trains and accessories. However, short of turning the power on and off, you'll find your closest companion is the Walkaround controller which plugs straight into the Base Unit. The WALKAROUND is a hand-held controller that you use to send your commands to the Base Unit, which then sends them on to the relevant decoder on your layout. You control the speed and direction of your trains from here. One o…

Scale: 1:6.

Scale 1:30Length 890mmBeam 180mmPlank on frame constructionThis radio controlled model is a replica of an Italian steam tug boat large numbers of which were built prior to the last war, many of which are still in service in the main Italian ports.The kit contains:- Building plans with general details and English instructions, Laser cut ply frames, decks etc., walnut or lime planking, cast and turned metal fittings, bulwarks and windows in photo etched brass.Comes complete with rudder, propshaft and blade.(Radio control equipment not included) Optional ExtrasModel Makers Glue PackDeluxe Materials Speed Bond 112gDeluxe Materials Roket Max Thick Cyano (Super glue)Planking Took KitVersatile bending t…

The Tamiya model kit Mercedes-Benz Arocs model is in scale 1:14. 3-axis chassis with metal frame and 3-speed manual transmission (switchable via optional servo). All Tamiya semi-trailers can be used on the saddle plate. Re-model body made of ABS plastic, pre-painted body parts (cabin, H, K, M parts) in TS-42 Light Gun Metal. The cabin can be tilted forward and a realistically recreated interior.

Krick Rescue Jet Boat Rescue Jet KJ20 is a true-to-the-original very fast jet boat that is used for rescue, police, pilot and many other purposes.High speed, great maneuverability and the possibility of sailing in very shallow waters, characterize these boats and the model. Equipped with two jet drives like the originals, this is a real driving pleasure. But the Rescue Jet also cuts a fine figure as a free-standing model on the shelf with its many original details. The hull, deck and superstructure are made entirely of white fiberglass. The great robustness and the fine detailing characterize this production method. An inner deck, which can be masked in rough seas, and on which the separately …

New from Mantua Models, this cargo ship kit is ideal for radio control or static display. Scale model of Italian cargo ship from the 1940's.  Kit includes laser cut plywood parts for accuracy and all necessary stripwood. Comprehensive set of fittings included with pictorial instruction booklet. Length 840mm Scale 1:40   Geared motor and accessory pack for Aiace (602) - Not included with kit All metal ballraced reduction geabox with motor for Aiace gives the model perfect scale speed with included propeller. Coupling and accessories included.

  The Calypso was built in the USA in 1942 as a minesweeper. She was bought in 1950 by Jacques-Yves Cousteau, and after extensive changes and modifications has become a fully equipped ocean research vessel, complete with observation chamber in the stern, oval diving bell, Galaezzi diving chamber, inflatable boat for shallow waters, helicopter and much other submarine equipment. Length 42 m, tonnage 360 tons, speed 12 knots.   Height: 330mm Length: 940mm Width: 170mm Scale: 1.45