Sailboat model building kits

Hobbies Starter Paint Pack (4 Pots) For Amati 1/50 Scale Viking Longboat Model Kit   Contains: 1 x AP9119W 1 x AP9125W 1 x AS9117W 1 x VAL865   MODEL KIT NOT INCLUDED. PAINTS ONLY.

Rolife Sailing Ship Wooden Model Kit The finished model kit gives you the complete look of a traditional sailing ship. Beautifully designed outlook with fluent assembly experience. This kit is the pe more→rfect addition to decorate your office or living room and also makes a great gift for the boat enthusiast.   Assembly Time: 1.5 hours Precise Laser Cutting Wood Sheets Assembled Size: 200 x 46 x 120 mm Wood Pieces: 118 pcs  

OcCre Display Stand for Pirate Ship Models Give your pirate ship model the display it deserves. This OcCre stand has been designed specifically for the pirate collection, featuring a complete base wi more→th support cradles and skull-themed decorations that complement the look of your finished build.   This display stand fits the following OcCre pirate ship models: Royal Fortune Black Swan Buccaneer Flying Dutchman Corsair

Comtesse Sailing Yacht Kit with Fittings SetThe Comtesse is the image of a typical sailing yacht of the 70s and 80s. These rugged, mostly GRP boats still make up the classic image of marinas across Eu more→rope. There are numerous models from diverse shipyards and on the basis of this shapely hull many original yachts can certainly be modelled and equipped with numerous individual details.At the same time, this shapely yacht offers very good sailing characteristics for the demanding sailor and is ideal for a relaxed afternoon at the lake. Thanks to its streamlined hull with moulded keel fin, the elegant Comtesse achieves remarkable speeds in light wind conditions. But even with stronger breezes can …

Billing Boats 720 Oseberg Viking Longboat Plank on frame model. Full-size plans and illustrated step-by-step instructions are included along with hull and deck fittings. Height: 450mm Length: 860 more→mm Width: 210mm Scale: 1/25th Suitable for experienced ship builders The Oseberg was found in Norway at Oseberg in Vestfold in 1903, resting on a bed of blue clay and covered with turf and stones. The Oseberg was built in the last half of the 800's and was buried roughly 50 years later. The ship is some 50 to 100 years older than similar vessels which have been found. It lay deep in the water and must have been relatively dangerous under sail. Not suitable for children under 14 years of a…

The "Torborg" is a classical Norwegian rowing and sailing boat. This type of vessel is widely known in Norway and was used for many purposes. The original boat, dating from 1870, is owned by the Stava more→nger Maritime Museum. This type of boat was used as a pilot boat. It could be rigged quickly so that it could be quickly dispatched to the waiting ship. There was great competition among pilot boats wanting to guide ships into the Norwegian fjords. To be competitive, manoeuvrable and speedy boats, equipped with both sails and 2-3 sets of oars were a necessity. Height: 230mm Length: 320mm Width: 95mm Scale: 1.20   OPTIONAL EXTRAS: Model Makers Glue Pack contains: Deluxe Materials S…

The Clipper is a sailing boat which forms an excellent choice for that first step into the world of model boating. The hull is of simple construction, and is assembled directly on the underside of the more→deck, i.e. the bulkheads, keel and centreboard are simply slotted in and glued in place. All you need to construct the model is modelling pins and adhesive tape. The kit includes all the wooden parts and fittings required to build the boat, plus rudder, glue and comprehensive building instructions in German, English, French, Italian and Spanish. Length: 480mm Height: 610mm Width: 97mm The hull bottom and sides are supplied pre-cut from thin plywood, and are ready to glue to the structure.…

Aeronaut Bella Sailing Yacht - Model Boat KitBella is a dream-boat, featuring a great deal of genuine mahogany timber. The boat is of proven hard-chine construction, assembled on a Depron jig plate us more→ing a method introduced by aero-naut with the Classic boat. Construction is so simple that even beginners to building can successfully produce a good-looking model. The detachable roof provides good access to the RC system components and the generous space inside the cabin. The cockpit insert takes the form of a watertight shell, and if necessary the entire insert can be removed by undoing a single screw: the hull is then open over the full length from mast to stern.Length 810mmWidth 235mmMast he…

Crewed by violent and homeless sailors like Blackbeard, Anne Bonny, and Edward England, it would have put fear into any sea going vessel that would have encountered it. The Amati Adventure Pirate Shi more→p Features Level: Beginner/Intermediate Scale = 1:60 Length = 780mm Plank on frame Laser cut parts Cradle included Cast metal cannons and brass fittings This kit is based on a classic Pirate ship which would have been the scourge of the Caribbean. History Edward England, the scourge of the African coasts, John “Calico” Rackam, who shared his pirate adventures with his lover Anne Bonny, Bartholomew Roberts, who turned to piracy just for the fun of it, and Edward Teach, better known as B…

Amati Viking Longboat Features Scale 1:50 Size: Length 440mm (17 1/4”) Pre-cut outer planking  Pre-cut keel, frames and decking  Wooden mast and yardarm Figurehead and accessories in wood and more→resin cloth for sails Laser cut cradle included. Amati's model is based on a 9th century Viking ship. Plank-on-bulkhead construction features laser cut wood keel, frames and deck. Individual wood strips are provided for hull and deck planking. Wooden mast and yard, sailcloth, cotton rigging line, resin and hardwood fittings, plus authentic figurehead allow you to outfit your model just like the original. Clear plans and detailed instructions make building easy. Please note Hardwood Base and …