Model Building Kits

Arrow   Designed by L J Rowell for Aerokits back in the 60s. CNC Router cut from 1.5 & 3mm Plywood the kit includes all wood Parts with clear acetate windows ,full size plan and instructions. Length : 25.75 ins (654mm) Beam : 7.33 ins (186mm) Includes extra metal fittings pack

Motorised Turntable The turntable is designed to operate with the Standard Train Controller R965. Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set). Your speed controller now controls the rotation of the turntable. If you are using an HM2000 controller, then the turntable must be powered from the uncontrolled DC output with an R047 Lever Switch, 'on-off', not from the speed controller output. The set includes eight access track sections and wiring. You can add and subtract access sections to suit your layout, up to a maximum of fourteen.

Model difficulty level: 5 – Professional Vehicle type: Military vehicle

Mantua Models 1/25 Scale Arm 802 Fishing Vessel Model Kit The ARM 82 is an attractive model of a typical Dutch fishing vessel. The hull is flat-bottomed, an aid against running aground in shallow water. The Mantua kit features the following: A plank on frame hull construction, building plans with general details, English instructions, walnut or lime planking, wooden masts and spars, brass, walnut and boxwood fittings, etched brass details, rigging cord and sails. All sheet ply sections are laser cut for accuracy.   Length: 620mm   This is a model kit that requires assembly. Glue and paint not included. Optional Extra: Model Makers Glue Pack Contains: Deluxe Materials Speed Bond 11…

Scale 1:55 Length: 470mm This highly detailed model represents a gunboat galley of the American navy, used during the victorious battle of Lake Champlain in 1814, against the British fleet. These vessels were very agile and well armed, utilising both cannon and carronades. They were a very important contributory factor in the war of US independence. The kit includes all of the usual very high standard Amati parts; Pre-cut keel and frames - construction is double plank-on-frames for easy assembly, Wooden and metal fittings - masts & yards are walnut; cannon and carronade are solid brass, Sail cloth, Launch slip to display the model, Detailed plans and step-by-step instructions. Optional …

Great little starter kit, Easy build and clear instructions. This is a good introduction to model boat building Length: 580mm Width: 180mm Manufacturer: Aeronaut Includes: running gear and fittings Running gear: propshaft, propeller, couplings and rudder Semi-scale kit of a 1960's cabin cruiser, of all-wood construction. The cabin superstructure is removable, affording good access to the battery, power system and radio control system. All parts are die-cut for fast assembly. In addition to the building instructions the kit also includes a detailed plan, all wooden parts and fittings, shaft and propeller, and a jig for assembling the bulkheads, which greatly simplifies construction. The Diva R…

Occre Mississippi Paint Pack The pack includes the colors, dyes and varnish necessary for the perfect finishing of the Mississippi.   Contains: 19141 - Judea Bitumen 19142 - Primer 19300 - White 19301 - Black 19305 - Ochre 19306 - Yellow 19307 - Dark Brown 19310 - Red 19314 - Light Green 19315 - Dark Green 19380 - Gold 19381 - Copper 19382 - Silver 19384 - Grey1 19386 - Grey3 19209 - Satin Varnish

P-40 400 RTF 4-Channel with Flight Stabilisation A fly anywhere, four-channel, gyro equipped semi-scale version of the USAAF's highly manoeuvrable all-metal fighter, with a performance that belies its size   Key Features: Fully assembled and ready to fly. Switchable 6 axis gyro stabilisation. Exceptional duration. Exempt from the CAA's DRES scheme. Full four-channel control. Fixed demountable undercarriage. Easy to hand-launch. Travel / suitcase-friendly. Clip on propeller with prop saver. High lift undercambered wing section. Includes 1S 400mAh LiPo battery and USB charger. Fully aerobatic when flown in Expert (gyro off) mode.   What's in the Box? 1x Fully as…

River Police Launch    This boat was used by the Metropolitan Police on the River Thames in the 60s & 70s       Re-Designed in 2018  CNC Laser & Router cut from 1.5 & 4mm Plywood the kit includes all wood Parts with clear acetate windows ,Full comprehensive  instructions,  Coloured Building Pictures Instructions, A3 Fittings Plan Length : 26 ins (660mm) Beam : 7.5 ins (190mm) Includes extra metal fittings pack

Detailed hull with wood grain Detailed deck with pin rails 4 cannon on mount Detailed masts and yards Includes core paints, paintbrush and precision glue

Amati Royal Carriage 1819 Model Kit This stunning kit of the Egyptian style carriage that was made for Maria Cristina of Bourbon to attend the Carnival Gala in Turin in 1819 is truly exquisite with many photo etch parts. With a scale of 1:24 and an overall length of 335mm this model will create a true display piece. The Kit Includes Pre-cut wooden details, lathe turned wooden spokes and uprights, gilt decorations, velvet paper for upholstery and metal accessories, detailed plans and instructions. Scale - 1:24 Length - 335mm Model Number - 1601/01 Starter Paint Pack Includes: 6 x 17ml Vallejo model paints. Vallejo paints are supplied in plastic bottles of 17ml with an eyedropper device which kee…

Thomas & Friends James the Red Engine with Moving Eyes OO Gauge Highlights: moving eyes realistic resemblance to the character in the series compatible with OO/HO gauge track and model railways DCC ready 3+ compliant  suitable for young Thomas & Friends(TM)  fans   Meet James: James is a red 2-6-0 ('Mogul' wheel arrangement) steam engine with the number 5 painted on his tender.  James first appeared in 1946 in the 2nd book in Reverend Wilbert Awdry's The Railway Series, entitled 'Thomas the Tank Engine,' and two other books in the series are dedicated to him, No.3 'James the Red Engine' and No.28 'James and the Diesel Engines.' He pulls the red …

Revell Model Kit #14536, Skill Level 4, Contains 46-Parts, Recommended for ages 12 and up Fruehauf 9,200-gallon, 4-compartment tanker. Can be assembled with support posts raised or lowered. Detailed suspension, overhead loading ports, & valve distribution system. Fits all Revell/Monogram 1:32 scale 10-wheel tractors. Molded in white and black. Requires paint and glue. (not included)

Designed for modelling fun Plastic parts with improved attention to detail Ready for immediate installation

Trumpeter 1/35 KET-T Recovery Vehicle based on MAZ-537 Heavy Truck Plastic Model Kit FEATURES AND SPECIFICATIONS: 13 sprues + cab & tyres, photo-etched parts L: 294mm W: 83mm Total parts 600+   HISTORY: The KET-T is a heavy recovery vehicle. It is based on a MAZ-537 8x8 heavy high mobility vehicle. This vehicle is fitted with special recovery equipment. It entered service with the Soviet Army in the 1960s. Despite its age the KET-T is still in service with Russia and possibly some other countries. The main role of the KET-T is to recover varuious damaged, overturned, swamped, or stuck 8x8 military vehicles. The KET-T also provides maintenance service and tows vehicles to maintenance un…

Model Boat Kit

w/tracking number by JP post Tamiya 1/12 big scale series No.54 Tyrell 003 1971 Monaco GP 12054