Power Saws

HO-FKS315V1200_400V Circular saw: D size saw. 315 mm - 3000 W 400 V 3-phase

Circular Hand Saw / 3,000 Watt / 19 kg / 450 mm Blade Diameter / max. Cutting Depth at 90° 185 mm

Circular Hand Saw / 3,000 Watt / 19 kg / 450 mm Blade Diameter / max. Cutting Depth at 90° 185 mm

Professional and precise working with the pre-scoring attachment. This circular sawbench is for the dedicated professional and home user who want the very best. Ideal for panel sizing and deep ripping in soft and hard timbers. The Precisa 6.0 offers an impressive 110 mm depth of cut. Thanks to the extensive accessory range maximum operational opportunities are guaranteed. The Precisa 6.0, in the ”VR” option, has a factory installed motorized pre-scoring unit fitted for those needing the ultimate cut in surface coated sheet material. Micro adjusters to the rip fence and flip stop ensure that all fences accurate to 0.1 mm, guaranteed. The width of the pre-scoring sawblade can be

Cuts 250mm round or square material with variable adjustable cutting downfeeds. Suitable for a wide variety of uses in job shops, toolrooms, maintenance departments, metal fabricators, building trade, machine shops, schools & colleges for cutting off section or solid in many materials it has a 2hp main motor with 4 speeds from 15 - 84m/min and can cut angles up to 45. Fully CE marked.

Radial Arm Saw / 4,000 Watt / 149 kg / 350 mm Blade Diameter / max. Cutting Depth at 90° 110 mm

Plunge mechanism – allows for precise plunge cuts with accurate depth of cut Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywood Single bevel pivot point – when sawing using a track (sold separately), The track can be positioned in the same way for bevel cuts or non-bevel cuts The Bosch gkt13-225 track saw with plunge action delivers precision and power, Ideal for making table-saw quality cuts to wood and wood-based sheet goods such as laminated particle boards and plywood. The track-guidance system provides exact adjustments for precision end-to-end cuts and plunge cuts…

Do you do light metal fabrication or chassis building? If so the CS-275EU could be the right saw for you. This 220 volt, 50hz, single phase circular coldsaw features an 11 (279mm) blade that turns at 54rpm and has a 3.25 (83mm) round capacity at 90, big enough for just about any chassis project. n nThe CS-275EU is built to provide years of service, with its fully cast iron head; robust 1.5hp (1.1kw) motor, and heavy-duty vice. The vice uses a cam-lock device that allows for fast material loading and unloading, as well a second support on the opposite side of the blade to help ensure perfect cuts. The head of the CS-275EU also swivels to 45 in both the left and right directions, making this

Pneumatic Reciprocating Saw - Masterex 79617 by EGA Master

A large trade rated woodworking bandsaw precision made for professionals. 24" diameter cast iron balanced wheels and a powerful 4000w motor give this bandsaw serious cutting capacities. Industrial grade bandsaw blade guide along with a fine ground and thickens cast iron table for constant high quality work.

Strong Arm PROFACTOR performance – delivers corded performance from an 18V cordless 7-1/4 In. saw 2-1/2 In. cut capacity – allows for easy cutting through 2X material across the entire bevel range ECO mode – helps get the job done by extending runtime by up to 30% BITURBO Brushless Technology – featuring a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by CORE18V PROFACTOR batteries CORE18V PROFACTOR Performance Battery – compatible with Bosch 18V tools

225mm Round capacity 2 Speed motor Manual or servo assisted descent 400v 3 Phase 2,0kw motor

The CS-315EU is the flagship of our EU line of coldsaws. The CS-315EU is designed to give any shop years of service without breaking the bank. The CS-315EU coldsaw is a powerful machine that can cut through solids, tubing, or pipe. The head has a strong motor coupled to a direct-drive gearbox that allows the blade to cut through the material chatter free which increases blade life. n nThe saw has a thick cast iron base making it very rigid. The CS-315EU includes a heavy-duty steel stand that is set at the optimal cutting height. n nThis is the perfect machine for small to medium fabricating shops, and best yet it requires just 220 volt, 50hz, single phase power. n nThe CS-315EU runs at

You can control the descent of the BS-210M in 2 ways: manually (with a trigger switch) or with a hydraulic descent featureusually seen only on more expensive models. n nWith a good mix of features at an economical price, this saw is ideal for small-to-medium machine shops or even garage or home shops. n1.5 hp motor requires only 240 volts to run, so you can use it anywhere. n177mm round maximum capacity at 90. nSwivel head miters up to 60 and doesnt compromise the holding power of the vise. nCast iron saw head and bow reduce vibrations and help to produce clean, accurate cuts. nAccepts standard blades. nYou can adjust the infinitely variable blade speed from 66 to 280fpm, controlled by an

225mm Round capacity 2 Speed Motor Pivoting saw bow 60 to the right Quick-clamping vice

Table Band Saw / Safety Features Emergency Stop Switch

The BS-712MS is one of the most versatile horizontal bandsaws on the market. The design is based on the BS-712M, but with an added heavy-duty, cast iron swivel head to do its mitering instead of the vice. This feature allows for faster production times and less waste. The BS-712MS horizontal bandsaw is powered by 220 volts, 50hz, single phase, allowing it to be used just about anywhere, and much like the BS-712M It also features wheels to make it portable. In the horizontal position, the BS-712MS has a 178mm OD round, and a 178mm x 260mm rectangle capacity. n nLike all Baileigh Industrial band saws the BS-712MS is built from the highest quality components. The head and bow of the BS-712MS

Have a shop that uses a coldsaw on a daily basis? If you do, look at the heavy-duty CS-275M manually operated coldsaw from Baileigh Industrial. This 11 manual coldsaw has many features. n nWith a maximum capacity of 2.75 round at 90, this saw is the perfect choice for jobs like marine rails, playground equipment, hand railing, and various chassis applications. The CS-275M has the ability to mitre from 45 to the right, and to 90 on the left, perfect for slotting applications. n nThe CS-275M has a 3hp motor that is run by 400 volt, 50hz, three phase power. It has two speeds, 60rpm and 120rpm. This is especially important when cutting multiple types of material. A good rule of thumb is lower

Engine power: 400V / 1.3kW2 speeds (22 and 44rpm)100mm Round capacity at 9082mm Square tube at 90

Engine power: 400V / 1.3kW 2 speeds (44 and 88rpm) 100mm Round capacity at 90 82mm Square tube at 90

The SIP 10" Vari-Speed Swivel Head Metal Bandsaw is a powerful and accurate auto-cutting bandsaw machine ideal for cutting bar, tube and profile workpieces using a range of metal types. This includes mild steel, stainless steel, aluminium, copper, brass and alloys. SIP Metal-Cutting Bandsaws are highly efficient, easy to use and safely cut metal to a high standard, helping to avoid use of manual cutting operations. They are an essential machine for metal and engineering workshops. KEY FEATURES Variable speed inverter motor control Direct drive motor gearbox transmission Heavy-duty cast iron swivel bow head Semi-automatic cut-down function Adjustable cast iron vice Enhanced safety