Chargers & Jump Starters

Meet the GENIUS2DUK - A direct-mount onboard battery charger, battery maintainer, trickle charger, battery conditioner and battery desulafor for an under-the-hood battery charging system and year-round battery maintenance. Direct Mount - An onbboard charger that securely mounts nearby the battery with its rugged snap-fit mounting bracket and effortlessly installs into most materials with truss-head self-tapping screws. Do more with Genius - Designed for 12-volt sealed lead-acid automotive, marine, leisure, and deep-cycle batteries, including flooded, gel, AGM, EFB, SLA, VRLA, start-stop and maintenance-free batteries. Enjoy precision charging - An integrated thermal sensor detects the ambient …

This portable 12V power pack will provide standby or emergency power to start vehicles with up to 3litre engine capacity. It has an Inbuilt compressor for inflating tyres or leisure products such as air beds, dinghies etc This Jumpstart also has an integrated light; ideal for emergency repairs/starting. Additional outputs include two 12V dc accessory sockets (cigarette lighter type) and a 5V USB connector allowing the unit to power a wide range of portable equipment such as mobile phones, laptops etc.

Automatic battery charger and starter designed for charging maintaining and boosting a variety of AGM (stop/start) GEL lead acid and Lithium LiFePO4 batteries up to 300Ah. Intuitive digital display and 150A peak engine start function makes this unit ideal for every workshop. Features overcharge short circuit and reverse polarity protection. Dedicated charging programs for AGM GEL and conventional lead acid batteries with fully automated charging algorithms. Fast charge program for larger batteries. Automatic boost/engine start function once 12V mode is selected and battery voltage is over 4V. Portable design with carry handle and cable management system which allows the clips to be

Victron Energy Orion-Tr Smart 24/12-Volt 30 amp 360-Watt DC-DC Non-Isolated Charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth and IP43 protection Can be used in 12-Volt or 24-Volt systems and is suitable for both lead acid and lithium batteries, unlimited multiple units can be connected in parallel to increase output power With Bluetooth Smart enabled the unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery Screw terminals: The screw terminals give the advantage of …

Advanced battery charger with built-in Bluetooth module for remote control and monitoring, configuration possible with the help of the free Victron Connect app Technical features: suitable for 12V battery voltage, 15A charging current for a battery circuit, charges lead and lithium batteries Housing material: aluminium, battery connection: screw brakes 13 mm²/AWG6, protection class: IP22, weight: 1.3 kg, dimensions (H x W x D): 235 x 108 x 65 mm Normal mode charging current: 15 A, Charging current night/low mode: 7.5 A, Efficiency 93%, Power consumption without load: 0.5 W, Number of outputs 1, Protection features: Reverse polarity of battery (fuse), Output short circuit, Over temperature -…

For convenient charging of any common car battery Remains fixed in the vehicle Perfect for built-in batteries that are difficult to access Length: 50 cm / Diameter 6 mm Suitable for AEG chargers with the following item no.: 97015, 97016, 97017, 97018, 97019 from 1.5 to 10 A

GYS Controller, battery voltage This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. Please select your vehicle from the drop down list to check compatibility with the product.

Charges two batteries simultaneously 1.8m cable Suitable for 2.0Ah 3.0Ah 4.0Ah and 5.0Ah D20 batteries. D20 interchangeable battery system allows you to combine one battery with any of the tools within the D20 series.PTDDRPDIR92239

Jump Leads / Case / Protection Overvoltage Protection / Length of Cable 500 cm

All-round Protection This premium leather made of sturdy and durable EVA material can effectively shield accidental collisions, dents and scratches, and has a waterproof/shockproof/dustproof function. Easy to go: The non-slip handle makes it easy to hold jump starter and accessories together and take it anywhere. 2 Function Compartments The top layer can hold accessories, and the bottom is perfect for jump starter Adapt: Specially designed for JA300/JA301/JA302/JA400. Jump starter has its own slot and is thoroughly protected. Case only: case only. Jump starter is not included. Get 100% satisfaction and 24 months extended warranty. If you have any questions, please feel free to contact us.…

Reliable, affordable, powerful

The Sealey emergency jumpstarter is built with a composite case with integral battery clip storage and carry handle for added convenience. This model is fitted with a 12V power socket that will accept any 12V device with a vehicle accessory socket plug, and two batteries connected in parallel to give high peak and cranking currents. This unit also features a test button to check battery condition and a low voltage switch for use when on 24V system recharge Completing this jump starter is a robust build and a 230V mains charger.

UNLIMITED OUTDOOR ENERGY - Secure reliable access to electricity when camping, camping and in the garden with the Forever Outdoor OS300 portable power station. This is an advanced power source that allows you to use electrical equipment anywhere. ⚙️ Innovative LiFePO4 Technology: Thanks to the advanced battery with LiFePO4 cells, the OS300 offers higher performance and battery life with a lower weight and outperforms common lithium-ion batteries. This is a technology that provides a reliable source of energy in any situation. Compact design, mobile power: Despite its small dimensions (29.7 x 19.3 x 19 cm), the OS300 offers an impressive number of functions. With 9 sockets/output ports, bui…

The Sip Advanced Battery Charger Gx10 Is The Ultimate Tool For Charging Support And Diagnostics Combining Intelligent Charging Maintenance Supply Reconditioning And Testing In One Process. • 12V Output Voltage 10A Output Current • Energy-Efficient Charging For High Cost Savings • Multi-Step Microprocessor-Controlled Charging • Integrated Alternator And Battery Test Features • Automatic Maintenance Mode On All Batteries • Suitable For Atvs Motorcycles Cars Vans Boats And Trucks For High Versatility In All Applications • Perfect For Lead Acid; Agm Gel (+Ca-Ca) Wet Efb Start-Stop And All Lifepo4 Battery Types • Reconditioned Supply Test Lead Lithium Modes

Electrify your tankbag (with a “crosshair” current input) or create a weather-proof power connection on your hardcase! Length: 10 inches (25 cm). DC 2.5 x 5.5 mm inner socket. -40°C/-40°F - Suitable for use at very low temperatures. Cable remains flexible at temperatures below freezing. Max. current rating: 5A. With line rubber seal for OptiMate heavy load SAE connection.

part_number. 024151

Automatic temperature compensation offers improved charging efficiency at all temperatures Dedicated AGM mode for fast and efficient charging of GM stop/start batteries Increased user flexibility - eight modes for all battery-charging needs Genuine Part