Chargers & Jump Starters

Seven Step Smart Charge Algorithm, Automatic Power Supply Function, Water, Dust and Chemical Resistant Technical Specification: 12V, General Purpose 5 Year Warranty

Meet the GENIUSPRO25 - Similar to our G15000UK, but delivers 150 percent more power. With the greatest performance and functionality yet, it's a commercial-grade battery charger to let professionals push the limits at incredible charging speeds. Do more with Genius - A multi-voltage charger - 6-volt (25A), 12-volt (25A), and 24-volt (12.5A) - for lead-acid automotive, marine, leisure, and deep-cycle batteries, including flooded, gel, AGM, EFB, SLA, VRLA start-stop and maintenance-free, plus lithium-ion (lifepo4) batteries. Engineered for pros - Designed for professionals who need absolute performance and uncompromising functionality. Featuring ultra-flexible silicone cabling - down to -40ºC -…

Ideal for cars Designed to charge 6 V and 12 V batteries from 4 to 160 ah 4 charge modes: slow, fast, cold, 6 V Safety and ergonomic Intuitive interface with LCD display

This portable 12V power pack will provide standby or emergency power to start vehicles with up to 3litre engine capacity. It has an Inbuilt compressor for inflating tyres or leisure products such as air beds, dinghies etc This Jumpstart also has an integrated light; ideal for emergency repairs/starting. Additional outputs include two 12V dc accessory sockets (cigarette lighter type) and a 5V USB connector allowing the unit to power a wide range of portable equipment such as mobile phones, laptops etc.

It features charging indicator lights and enhanced ventilation and cooling to prevent overheating. It can be easily plugged into the vehicle cigarette socket and comes with a 1.8m cable. E-Mark certified for in-car use. Suitable for use with the following D20 batteries: 2.0Ah 3.0Ah 4.0Ah and 5.0Ah. D20 interchangeable battery system allows you to combine the same battery/batteries with any of the tools within the D20 series.PTDDRPDIR02255

Fully automatic multi-stage microprocessor controlled battery charger and maintainer. Sturdy case with protective bumpers and built-in hanging hook. By modifying the charge output through constant monitoring the life and condition of the battery is optimised. Scrolling digital display with various inbuilt language options. Charge status LED. Multistage charging features thermal runaway as well as integral ventilation and spark-proofing for maximum safety. Reverse polarity protection in case incorrectly connected to battery.Schumacher® 15A/10A 12//24V Automatic Smart Battery Charger & Maintainer• Output: 12/24V - 15/10A.• Battery Range: 40-230Ah Lead Acid.• Fully automatic

J401 JUMP STARTER From : Lokithor

Optimate Accessories TM-95 (KET)

Car Battery Charger / Battery Charge / Bluetooth / Protection Reverse Polarity / Protection Class IP 65

The SIP 1000A 12V Capacitor Booster is an innovative handheld portable device designed to discharge a high current boost needed to start a larger car or van battery. Offering powerful performance in a compact unit, the 1000A Capacitor Booster is ideal as a safeguard for home users which can be easily stored or a quick and easy solution for small automotive workshops. Starts up to 5 Litre petrol or 3 Litre diesel engines. KEY FEATURES 1000A peak current and 500A starting current Lightweight capacitor energy cell for powerful performance 90 second preparation 'ready' time for fast boosting capability No weight, inefficiency or deterioration of an internal battery Portable and compact

Makita fast battery charger charges Makita batteries from 14.4V to 18V in as little as 22 minutes The DC18RC is a compact-sized fast charger which takes only 22 minutes to fully charge a 3.0Ah Li-ion battery. The innovative computer-controlled charging system provides optimum charge to each battery through the digital communication between charger and battery. The internal cooling fan keeps the battery temperature low for minimum charging time. Features: The DC18RC has a cooling fan and Active 3 Controls This means that during the loading of the charging voltage charging current and temperature is held in the holes The cooling system blows cool air into the battery As a result high

Test batteries on or off vehicles quickly. Reliably test batteries and alternators and test charging systems ability, up to 100 amp loading capability. Safety switch prevents sparking. Heavy duty plated clamps. Suitable for most 12-volt car/van lead acid batteriesSuitable for all 12v Lead/Acid batteries and alternators and test charging systems ability.Tests up to 100amps.Safety switch prevents sparking.Heavy duty plated clamps.CE and RoHS compliant.

Unique LiFePO4 battery preperation for dealers & consumers! The 4 bank OptiMate Lithium charges up to 4 x LiFePO4/LFP independently. Ideal for: LiFePO4 12V batteries from 1 to 10Ah SAVE : Low Volt Start of 0.5V + 3 step low volt save & test. Battery BMS reset. CHARGING AMPS : 0.8A (per bank) Included Accessories: 1 x O1 Weatherproof Eyelet Lead. 4 x O4 Clamp Lead for bench charging

The Sealey emergency jumpstarter is built with a composite case with integral battery clip storage and carry handle for added convenience. This model is fitted with a 12V power socket that will accept any 12V device with a vehicle accessory socket plug, and two batteries connected in parallel to give high peak and cranking currents. This unit also features a test button to check battery condition and a low voltage switch for use when on 24V system recharge Completing this jump starter is a robust build and a 230V mains charger.

The Clarke IBC7 is suitable for use with all types of 12V/24V lead acid batteries and can deliver up to 7A of charging. This unit also includes detachable ring terminals and detachable battery clamps fitted with an inline fuse for added usage.The IBC7 can be used as a constant DC 12V power supply and can also charge batteries up to 200Ah in size.

Bluetooth Smart enabled Adaptive 3-stage charge algorithm: bulk ? absorption ? float Remote on-off IP43 protection High temperature protected

O-121 TM Style Connector, NOT SAE Version