Chargers & Jump Starters

Charger Accessories

The Oxford Oximiser Pro 2000 Battery Optimiser is designed to automatically charge, maintain, and optimise 12V batteries. It features an intelligent 8-stage program that ensures each battery is charged safely and efficiently, extending its lifespan. Discover the key features of the Oximiser Pro 2000: 8 Stage Automatic Charging: The optimiser includes a comprehensive program that conducts a polarity test, analyses battery condition, performs desulfation for WET/MF, AGM, and GEL batteries, initiates a soft start, conducts bulk and absorption charging, checks voltage, and finally maintains the battery at float voltage, ensuring your battery receives a thorough, safe, and efficient charge for extended …

Multi-voltage Charger with 230V Power Supply Designed to charge all Type of vehicle batteries 6V, 12V and 24V Protection of the vehicle’s on-board electronics Delivered with clamps and connection terminals Charging capacity from 1.2 to 125 Ah (170 Ah in charge maintenance) in 6/12 V Charging capacity from 15 to 100 Ah (140 Ah in charge maintenance) in 24 V Even recovers batteries deeply discharged (SOS Recovery) Fully automatic and intelligent charging curve in 7 stages (50% faster than a traditional charger) Compact, lightweight design and sealed against dust and liquids (IP65) Total protection: against short circuits , polarity inversions and overloads

The HYSC-15000 is a SMART 230V battery charger from Hyundai. Designed for charging all types of 12V lead acid 24V lead acid batteries and 12v lithium-ion batteries including WET (Flooded) MF (Maintenance-Free) EFB (Enhanced Flooded Battery) AGM (Absorbed Glass Mat) AGM+ and LIB (Lithium-Ion) batteries. It is suitable for charging battery capacities from 1.2 to 130 amp-hours and maintaining all battery sizes. The HYSC-15000 features a built-in intelligent microprocessor making charging faster easier and safer. This chargers safety features including spark proof protection for reverse polarity short circuit overheat and overcharge. It also has auto-memory which returns the last

Hogert Technik Battery charger This part corresponds to the original part in terms of performance. The quality of the spare part fully meets the requirements of the car manufacturers. Battery Charger: Please select your vehicle from the drop down list to check compatibility with the product.

J1500 JUMP STARTER From : LOKITHOR

Charge your battery from another 12 V battery without AC power.Recharge your motorcycle, all-terrain vehicle or trailer on the move. The OptiMate DC to DC charger recovers, charges and maintains a 12V battery from another 12V battery or your vehicle. The high-performance, long-life maintenance mode of the OptiMate DC to DC charger protects the source battery, charging the battery only when it is needed. OptiMate maintenance mode keeps the battery connected at full load, without overcharging, extending the life and performance of the battery. The OptiMate DC to DC charger can save a completely discharged and sulphated battery from 1 V. Safe: No risk of overheating. 100% safe for the electronics …

Product 1: Quality Product Product 2: Easier connection: 2.5 metre cable, for connection to further away or hard to reach batteries Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Secure: snug and safe connection via CTEK’s unique in-built connect system

Switch between STANDARD or BMW CAN-BUS program

Amorphous solar panel converts daylight directly into 12V electricity. Suitable for maintaining charge in a wide range of batteries and power packs. Ideal for batteries stored in boats and caravans and for batteries in vehicles in long-term storage. IP44 Rating (non-waterproof). For use behind car windscreen or other protection. Supplied with suction pad fixings, battery clips and vehicle accessory socket plug (only suitable for vehicles with permanent live accessory socket).Specifications:Model No SPP02Brand: SealeyNett Weight: 0.830kgOutput: 12V/2.4WDimensions: 370 x 210mmIP Rating: IP44

Water, dust and chemical resistant Seven step smart charge algorithm¦Recovery of fully discharged ?dead? batteries Automatic power supply function¦Severe cold performance: down to -30°C Several other battery life enhancing features¦Low power mode to charge smaller batteries Li-ion battery mode¦Setup and configure, readout of voltage and current by Bluetooth Smart

Protect your GB150 jump starter with a lightweight, crush-resistant, anti-shock, and weather-resistant case. Made from a rugged and durable EVA material with a soft melange velvet lining for a secure, scratch-free fit. Secure enclosure with a durable, precision steel-rimmed zipper, a built-in reinforced handle, and custom over-molded pull tabs. Portable carrying case design that's compact and lightweight and fits in most glove boxes or compartments. CCustomized to fit the GB150 UltraSafe Lithium Jump Starter, plus included accessories.

The SIP 12V Pro Booster 3100 is a purpose-designed AGM booster pack ideal for boost-starting in demanding applications. With heavy-duty clamps and copper-cored cables, plus a robust and shockproof ABS casing, the 3100 offers added durability. It also features a 12V DC take-off to power electronic devices directly, and is perfect for boost-starting motorcycles, cars, vans and trucks. KEY FEATURES 3100A boost peak rate and 1170A cranking rate Rechargeable and proven AGM pack with high crank rate 12V DC power take-off powers electronic devices directly Heavy-duty clamps and high-quality copper-cored cables Robust and shockproof ABS casing for added durability Reverse polarity

12 volt battery charger - designed for use on cars, motorcycles and light commercials' Smart charging capability - meaning it varies the amperage and voltage delivered according to the requirements of the battery. Low amps battery support mode - charger can be set to out put a constant 13.5 volts at 2, 5 or 10amps to support the battery when the ignition need to be left on for a period of time. Boost (rescue mode) - charger can be set to rescue mode to charge deeply discharged batteries - the tool is programmed to deliver a specific charge cycle to help desulphate the battery. Battery test mode - can be used to test the battery prior to charging. The 5475 does not need to be plugged into the …