Chargers & Jump Starters

• Suitable for 12V & 24V electrical systems. • Fully electronic, microprocessor controlled.• Suitable for EFB & AGM/GEL (stop/start), Lead Acid, Lead Calcium & Silver Calcium batteries.• Battery Range: 4-700Ah.• Up to 10 analysis and charge phases, including trickle/maintenance.• Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology.• Surge and spike protection during charging and starting.• BSU mode provides support for the battery during prolonged electronic diagnostic checks.• Includes wired remote control switch to allow operator to deliver required starting power, while being sat in the connected vehi…

The Blue Smart IP67 waterproof battery charger is the new professional charger with integrated Bluetooth.The Blue Smart IP67 waterproof charger can be used in devices both in your workshop and in motor vehicles, such as (classic) cars, motorcycles, boats and motorhomes.This charger has a 7-stage charging algorithm that intelligently charges the battery by providing it with the necessary power, maintaining its good condition, ensuring better performance and longer life.Victron battery chargers will attempt to recharge a deeply discharged battery by force feeding it at low current.As soon as there is sufficient voltage at the battery terminals it will recharge the battery normally.With the charger´s i…

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 16A.• Voltage: 230V 1ph.• Cable Length: 5m.• Cable Specification: EN 50620 - 3*2.5mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 16A. • Voltage: 230V 1ph. • Cable Length: 5m. • Cable Specification: EN 50620 - 3*2.5mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC1216Technical Specification:Length: 5mNett Weight: 2.4kgPlug Type: Type 1 to Type 2Current:…

This device will bring 4G LTE-M connectivity to all Victron Energy VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years
The GlobalLink 520 comes with two communication ports, which allows connecting up to two VE.Direct devices. With two digital inputs that also act as pulse counters and a remote controllable relay, it's a perfect solution to monitor and control your installation
Monitor battery state of charge, power consumption, power harvest from PV, generator and grid or check temperature measurements. Follow up on alerts and perform diagnostics checks
RuuviTag support: These sensors connect via BLE and are easy to setup via VictronConnect. All …

• Professional grade, high performance AGM battery, specially formulated to jump start vehicles.• DEKRA approved emergency jump starter.• Includes an automatic maintenance charger with patented microprocessor controlled speed charging and thermal runaway protection.• Unlike other booster packs, this unit can be left safely on charge continuously.• Audible warning system (AWS) signals if the unit has been turned on for too long without being connected to a battery and reverse polarity.• Fitted with an isolating rotary on/off switch and features a digital display showing the internal battery level and the vehicle battery voltage.• Fitted with a 12V accessory socket and a single 2.1A USB port id…

Victron Energy battery indicator panel shows the state of charge of the battery and is a Practical solution for Battery Management
The battery indicator panel shows the state of charge of the battery, It is an accessory for the Blue Smart and Blue Power IP65 Chargers
Suitable for 12-Volt lead acid batteries only (flooded, GEL, AGM). Not suitable for Lithium
After using the battery it takes about 30 minutes for the battery to regain its steady state condition and for the panel to show a correct status indication
The ‘traffic light’ system shows your battery’s charge status simply and clearly

With M6 / 1/4 inch eyelets that fit perfectly on your motorsport and most car battery terminals, and 15A fuse that protects the cable and electronics that can be used up to -40°C - premium quality!
Encapsulated monitor with 3 LEDs shows the charge status of the battery from full to empty for 12.8V / 13.2V LiFePO4/LFP batteries - The LED corresponding to the charging status flashes every 5 seconds.
SAE quick connection for charging the battery when required - with weather-resistant cap for use while driving
Indicates the charging system status when the engine is running, with fourth LED that indicates if the system is charged with more than 14.6V, which can damage lithium batteries - hassle-free c…