Chargers & Jump Starters

1. Mounting locationWarning! For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals, synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.1.2. Keep a clear space of 10 cm around the product for ventilation.1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the temperature increase of the heat sink is not more than 20 °C. However the unit may become hot when conducting fault ground current.
2. InstallationWarning! The galvanic isolator must be wired …

A fragrance that recalls the cosy notes of sweet white florals, spicy cloves and star anise to reveal mysterious bottom notes
The Milano collection blends colour and vibrancy to create a welcoming atmosphere in any home that's brimming with personality
Fills your home with sublime fragrance and adds a sophisticated finishing touch to your décor
Ideal for any indoor space. perfect for places where a naked flame is not appropriate
Contains 1 diffuser vessel with fragranced oil and 7 wooden reed diffuser sticks

Applies high current load test, giving accurate indication of battery condition. Suitable for 6V or 12V automatic lead acid batteries. Also for testing charging system performance. For home and workshop use. Cable length 2 x 300mm.

The Blue Smart Charger IP65 is the new professional battery charger with built-in Bluetooth.The Blue Smart IP65 charger can be used in devices in your workshop and motor vehicles, as (classic) cars.motorcycles.boats and motorhomes.

• Cable & Clamp Length: 0.6m.• Delivers up to 1200 Peak Amps of initial starting power.• Composite case with integral battery clamp storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• Front panel displays internal battery charge level and includes an integral LED work light.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.• Single 5V 2.4A USB output.• Supplied wi…

• Heavy-duty steel case, high power US manufactured battery and industrial quality switchgear make this model suitable for starting most vehicles.• Positive action power switch reduces risk of inadvertent damage by over-voltage.• Heavy-duty 2m x 35mm² copper cables provide efficient power transfer.• Twin trips prevent damage to battery or internal circuitry.• Easy-to-read LED battery indicator to IEC 51 provides fast indication of battery’s state of charge.• Surge and spike suppressing circuitry reduces risk of damaging vehicle’s on-board electronics.• Fitted with charge balance circuitry to provide even charge to integral batteries.• Supplied with mains voltage recharge unit.• Made in Europ…

An Inverter/Charger with device networking built-in.The MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation.Capable of parallel operation for increased power output, or battery charge-rates.The MultiPlus-II GX can also be configured for three-phase supply.A host of advanced features - such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power - can all be controlled straight from your phone or smart device.Remote monitoring is also possible.A MultiPlus-II with LCD and GX functionality The MultiPlus-II GX integrates a MultiPlus-II inverter/charger …

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 16A.• Voltage: 230V 1ph.• Cable Length: 5m.• Cable Specification: EN50620 - 3*2.5mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 16A. • Voltage: 230V 1ph. • Cable Length: 5m. • Cable Specification: EN50620 - 3*2.5mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC2216Technical Specification:Length: 5mNett Weight: 2.4kgPlug Type: Type 2 to Type 2Current:…