Chargers & Jump Starters

1. Mounting locationWarning! For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals, synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.1.2. Keep a clear space of 10 cm around the product for ventilation.1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the temperature increase of the heat sink is not more than 20 °C. However the unit may become hot when conducting fault ground current.
2. InstallationWarning! The galvanic isolator must be wired …

• Output: 1600A (Peak), 800A (EN).• Innovative technology with no internal battery so no need to wait hours for the unit to charge before use.• Simple and safe to use with no long term battery storage issues.• Can be fully energised in approximately 3 minutes.• If the vehicle's battery is faulty or is holding less than 5 volts the ElectroStart1600 can be pre-charged via another vehicle's battery, a Micro USB charging cable (not supplied) or the 12V accessory lead.• Digital display indicates battery voltage, capacitor charge and faults.• Can also be used as a 0.8A battery maintainer using a USB charging cable or a 2A battery charger with the addition of Model No. E/START2A Charging Adaptor.• Comp…

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points …

• Cable & Clamp Length: 1m.• Produces in excess of 1600 Peak Amps.• Composite case with integral battery clip storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• LED Battery condition and charge indicators.• Test cycle button gives true battery indication.• 230V Charger with automatic power cut-off prevents damage to battery whilst mains charging.• Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. • Supplied with mains charger.Composite case with integral battery clip storage hoods and carry handle. Suitable for starting vehicles with 6-cylinder petrol engines up …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points …

• The Mode-3 charging cable simply plugs into any public or home EV charging point.• Current: 32A.• Voltage: 380-450V 3ph.• Cable Length: 5m.• Cable Specification: EN50620 - 5*6mm²+2*0.5mm².• IP54 Rated.• Supplied with storage case.The Mode-3 charging cable simply plugs into any public or home EV charging point. Supplied with storage case.• The mode 3 charging cable simply plugs into any public or home EV charging point. • Current: 32A. • Voltage: 380-450V 3ph. • Cable Length: 5m. • Cable Specification: EN50620 - 5*6mm²+2*0.5mm². • IP54 Rated. • Supplied with storage case. • Model No. EVCC22323Technical Specification:Length: 5mNett Weight: 3.5kgPlug Type: Type 2 to Type 2…

• Cable & Clamp Length: 0.6m.• 22Ah Professional grade, high output AGM battery especially formulated to jump start vehicles.• Fully sealed battery enables the unit to be stored in any position.• Features a lightweight, high-impact casing, which is durable and corrosion proof for easy portability.• Battery status LEDs indicate to the user when the battery is at full power, 75% charge, 50% charge or less and when the unit needs to be recharged.• A fusible link integrated in the output cable gives increased protection to the unit, while enabling fuse change without disassembly.• On/off switch for safety and control.• Features 12V accessory outlet including overload and short circuit protection.• Wei…

Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for heavier garage use for engines up to 3L capacity. Built-in polarity protection. Features & Benefits: • Max. Charge: 45A(30A EN). • Max. Start: 200A(210A EN). • 12/24V Output. • Battery Range: 30-500Ah. • Easy-to-read ammeter and illuminated power switch. • Suitable for heavier garage use for engines up to 3L capacity. • Built-in polarity protection. • Model No. SUPERBOOST200 Specifications: Model No SUPERBOOST200 Brand: Sealey Ca…

High frequency inverter type unit designed to both charge a battery and provide support for the battery during prolonged electronic diagnostic checks. Charge cycle has nine profiles designed to optimise the condition of the battery and the speed of the charge. Designed for use with vehicle batteries including VRLA (Lead Acid), GEL, AGM/EFB and Leisure on 12V and 24V systems. Temperature sensor allows accurate charging of battery, even when cold. Safety circuitry prevents sparks or polarity reversal. Once fully charged, battery may be left connected to be automatically conditioned and maintained. Features & Benefits: • High frequency inverter type unit designed to both charge a battery and pr…

• Cable & Clamp Length: 0.6m.• Delivers up to 1200 Peak Amps of initial starting power.• Composite case with integral battery clamp storage and carry handle.• Suitable for starting vehicles with 6-cylinder petrol engines up to 3.5L and 4-cylinder diesel engines up to 3L.• Front panel displays internal battery charge level and includes an integral LED work light.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug.• Single 5V 2.4A USB output.• Supplied wi…