Bike Inner Tubes Schwalbe

Inner Tube 24 Inch / Size (ETRTO) 47-507 / City / AV (Auto) Type of Valve / Size 24 x 2.40 Inches / Valve Length 40

Inner Tube 29 Inch / Size (ETRTO) 54-622 / MTB / AV (Auto) Type of Valve / Size 29 x 2.50 Inches / Valve Length 40

For Road Riding With Tubes, The Aerothan Tube Is The First Choice. It Offers Low Rolling Resistance With Dynamic, Smooth Riding Characteristics. Compared To Butyl Tubes, A Total Weight Reduction Of 100 G May Be Achieved For The Entire Bike. Aerothan Tube Race Offers Not Only Reliable Puncture Protection, But Also Safety When Descending A Mountain: Even When Several Emergency Brakes Are Applied With Rim Brakes In Short Sequence, One Can Count On Its Heat Resistance Capacities. Aerothan Tubes Consist Of 100% Thermoplastic Polyurethane (Tpu), Including The Valve, And Are Therefore Fully Recyclable.Specifications:- Item: 20e- Valve Type: Sv- Valve Length: 60 Mm- Excecution: Aerothan- Type: Tpu- …

Road Bike Inner Tube / Size (ETRTO) 23-622 / Racing / 45 g / Max Tyre Pressure 14 bar / SV (Sclaverand) Type of Valve / Valve Length 80

Off road: Riding at lower pressure means better performance ... but at the same time it increases the risk of failures. The limit so far is at about 20 psi, below which its hardly possible to dare to ride normal MTB tires.But nothing stays the same: In the future, air pressure can be controlled in the tires double chambers. In the outer chamber, the air pressure is extremely low - ideal for maximum off road performance. In the inner chamber, directly on the rim, there is high air pressure even a very strong impact cannot dent the rim edge. At the same time, the inner high-pressure system secures the tire onto the rim. Burping, the dreaded loss of air at low pressure in conventional tubeless …

A bicycle tube is predominantly made of Butyl rubber. Butyl is a very elastic and airtight synthetic rubber. But as with the tire other fillers are necessary to make up the rubber compound. The quality of a tube can vary significantly depending on the rubber compound. For instance Schwalbe tubes have extremely high air retention and elasticity. This high elasticity allows a wide range of different tire sizes to be covered. There is a difference between heat molded and autoclave tubes. Vulcanizing in a mold improves the uniformity of wall thickness thus reducing weight and improving air retention. For this reason the autoclave tubes which can be produced easier have become less common over …

HIGHER AIR RETENTION.
The extra thick walls of the Schwalbe Air Plus keeps the air in the tube significantly longer. Therefore, you don’t need to pump it up as often.
BETTER PUNCTURE PROTECTION
Thanks to its greater wall thickness the Schwalbe Air Plus tube is especially robust - and thus optimally protected against punctures.
100% RECYCLABLE
The high proportion of pure butyl rubber ensures a long life. And if the Schwalbe Air Plus tube has to be replaced, it is 100% recyclable. Available in seven popular sizes from 20 to 29 inches.
around 70% higher wall thickness
high percentage of pure butyl rubber
high pressure stable valve seal
100% recyclable
Made in: Indonesia
Width: 40-62 mm
Valve …

The new TUBELESS VALVES are available in stem lengths of 40 mm, 60 mm and 100 mm and are a breeze to fit. There is a suitable valve solution for every rim depth. The valve base can be securely mounted in the rim with a hex key (4 mm) without over tightening. The shortened cone ensures a low installation height and thus more space for the tire beads. Thanks to the large valve inner diameter (4 mm), the tire can be inflated with air and sealing fluid particularly effectively. SV 40 mm.
Valve Length (mm): 40.0
Valve Type: Presta
Made in: Indonesia
Type of Product: Valve

The new tubeless valves are available in stem lengths of 40 mm, 60 mm and 100 mm and their design makes fitting them a breeze. There is a suitable valve solution for every depth of rim.- The valve base can be firmly installed in the rim using the hex key (4 mm) without over-tightening. The shortened cone ensures a low installation height and therefore more space for the tire beads. Thanks to the large valve inner diameter (4 mm), the tire can be inflated particularly effectively with air and sealing fluid.Specifications:- TL-Valve, 60 mm- Weight: 5,4 g

The tubeless rim tape is extremely user friendly and at the same time very high pressure resistant. Even on road bikes a single ply of tape is sufficient.

SCHWALBE Rim Tape Tubeless To seal conventional wheels for tubeless use application .Easy to use and very high pressure-resistant. A single layer is even enough on road bikes. 10 m long 19mm wide Specifications:- Group: Rim Tape- Size: 10m / 19mm- Primary Base Color: Blue- Type: Tubeless

Features:- This new inner tube from Schwalbe is made entirely from Aerothan.- Because of this plastic, the Evo inner tube weighs 2/3 less than the traditional inner tube.- The Evo Tube keeps the air in for a long time, stable and without leaks.Specifications:- Valve type: Presta valve- Valve length: 40 mm- Material: Plastic- Weight: approx. 68 grams

Uniquely light and extremely stable. Schwalbe revolutionary new tube made of Aerothan achieves previously unattainable top values in terms of elasticity, weight and puncture resistance and does not require any rubber. When it comes to racing with a tube , the Aerothan Tube Race is the first choice. Because it impresses with its low rolling resistance and dynamic, smoother driving dynamics. Compared to butyl tubes, a weight saving of 100 grams and more can be achieved for the entire bike. You can rely on the Aerothan Tube Race not only for its excellent puncture protection, but also when driving downhill: it remains absolutely heat-resistant even after several emergency brakes with rim brakes …

The SCHWALBE Aerothan Presta 40 mm 50g inner tube in White is a high-performance inner tube designed for use with road and gravel bike tires. Made from a revolutionary new material called Aerothan, this inner tube provides increased puncture resistance and reduced weight compared to traditional butyl tubes.Featuring a 40 mm Presta valve for easy inflation, the Aerothan inner tube is compatible with a wide range of wheel and tire sizes. Weighing just 50g, this lightweight inner tube is perfect for riders looking to reduce rotating weight and improve performance on climbs and sprints.Whether you're racing, training, or just enjoying a leisurely ride, the SCHWALBE Aerothan Presta 40 mm 50g inner …

Uniquely light and extremely stable. Schwalbe revolutionary new tube made of Aerothan achieves previously unattainable top values in terms of elasticity, weight and puncture resistance and does not require any rubber. When it comes to racing with a tube , the Aerothan Tube Race is the first choice. Because it impresses with its low rolling resistance and dynamic, smoother driving dynamics. Compared to butyl tubes, a weight saving of 100 grams and more can be achieved for the entire bike. You can rely on the Aerothan Tube Race not only for its excellent puncture protection, but also when driving downhill: it remains absolutely heat-resistant even after several emergency brakes with rim brakes …

The SCHWALBE Aerothan Presta inner tube is a lightweight and durable option for cyclists looking to reduce weight on their bikes. With a 40 mm valve length and weighing only 61g, this inner tube is designed for high-performance road or gravel riding. The white color adds a sleek and modern look to your wheels and tires. The Aerothan material is strong, puncture-resistant, and designed for low rolling resistance, making it ideal for competitive cyclists or those looking for a premium inner tube option.Upgrade your ride with the SCHWALBE Aerothan Presta inner tube and experience a smoother, faster, and more efficient cycling experience.

The Aerothan Tube MTB is just as resistant to snake bites as it is to side wall damage – thanks to the extremely robust material. In cross-country and marathon, a surprisingly low weight and low rolling resistance are great advantages. Even on challenging trails, this tube never gives up on you: Thanks to the exceptional form stability of the Aerothan Tube MTB, even at low air pressures, you always keep control of your bike.Aerothan tubes consist of 100% thermoplastic polyurethane (TPU), including the valve, and are therefore fully recyclable.

The Aerothan 46 mm Presta Inner Tube is a high-quality inner tube designed for use with wheels and tyres.Made from durable materials, this inner tube is built to withstand the rigours of regular use and provide reliable performance over time.With a 46 mm Presta valve, it is easy to inflate and deflate, and it is compatible with a wide range of different wheel and tyre sizes.Whether you are a professional cyclist or a casual rider, the Aerothan 46 mm Presta Inner Tube is an excellent choice for keeping your bike running smoothly and safely.

The Aerothan is a next-generation inner tube that sets new standards in weight, puncture protection, handling properties, ease of assembly and dimensions. Particularly suitable for racing bikes, mountain bikes or general-purpose use.Specifications:- Dimension: 700X28-35 - ETRTO: 30-622 - Valve: PRESTA 80mm - Weight (g): 54

A Schwalbe tube is extremely elastic and fits several tire sizes. For this reason we also call it a Group Tube. For example, the 19A tubefits tire sizes from 27.5´´ to 29´´ and widths from 40mm to 62mm.We have developed in our own factory a special devulcanization process. As a result, we can use recycled material without any loss of quality in the production of new tubes.Specifications:- Weight: 150g

Schwalbe Standard Bicycle Tube No. 13. For Bicycle Tires In Size 26´´ Inch (Etrto 40/62-559). Especially Suitable For Mtb. Keeps The Air Above Average Long. Thanks To The Best Material Quality And Uniform Wall Thickness. Highest Reliability, Which Has Proven Itself Millions Of Times.Specifications:- Item: 13- Valve Type: Av- Valve Length: 40 Mm- Excecution: Standard- Size: Etrto 40/62-559- Type: Butyl- Weight: 190 G