Files & Rasps

General purpose 300mm hacksaw with cast aluminium handle and square section steel frame. Simple wing nut blade tensioner.

Highly flexible, very thin blade with zero-set teeth that prevents marking of workpiece. For trimming dowels and other flush-cutting jobs.

Tri-cut saw with hardened and tempered steel blade and triple-ground teeth for fast, clean cuts through hard, soft and man-made wood. Cuts on forward and reverse strokes. Ideal for cutting curves and circles in wood and plastic.

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size: 100mm (4in)Cut: hand bastardTangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 100mm

Compass Saw

Stanley 0-15-556 150mm Plasterboard Saw 6Tpi 0-15-556 With a rust-proof blade, the Stanley 0-15-556 saw is long-lasting and durable. The thick teeth are ideal for punching through plasterboard to get the job done quickly and efficiently. Features: 6 teeth per inch Soft grip for ease of use Rust-proof blade treated by cataphoresis Thick teeth ideal for punching through plasterboard Specification: TPI: 6 Length: 152mm Net Weight: 0.169kg

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 100mm (4in)Cut: hand secondTangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 100mm

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: hand bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 150mm

Hardened and tempered steel blade that cuts quickly and accurately through all hard, soft and man-made timber.

For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 150mm (6in)Cut: hand secondTangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 150mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: square bastard.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 100mm

Tough, durable black die cast alloy body, with impact resistant polypropylene handle. Supplied complete with one fitted blade.

Moulded from tough impact resistant recycled plastic. Two 45° and one 90° guide on both edges and two countersunk holes for fixing to workbench. One edge is deeper to facilitate easier cutting.

A small rectangular slender file with edges tapered to a point.Both faces double cut for locksmithing and other precision work.Size 100mm (4in)Cut: warding smoothTangedAdditional Information:• Type: Replacement File• Cut: Smooth• Length: 100mm

Bahco Warding Cut File is a small rectangular slender file with edges tapered to a point. Both faces are double cut for locksmithing and other precision work. Smooth Cut: approx.. 62 teeth per 25mm (Fine).Second Cut: approx.. 36 teeth per 25mm (Medium).Bastard Cut: approx.. 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: warding bastard.TangedAdditional Information:• Type: Replacement File• Cut: Bastard• Length: 150mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 100mm (4in)Cut: square second.Tanged.Additional Information:• Type: Replacement File• Cut: Second• Length: 100mm

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing.Size 150mm (6in)Cut: square smooth.Additional Information:• Type: Replacement File• Cut: Smooth• Length: 150mm

General purpose box, moulded from tough impact resistant recycled material. One 45°, 60° and 90° guide on both edges. The base has two countersunk slots for fixing to bench. Ideal for the cutting of most sizes of coving, skirting boards etc. Sold loose.

These high performance sanding belts (75 x 533mm) are made from aluminium oxide that is resin bonded to provide efficient resistance and long lasting performance. The electrostatic sand planting and open coat aluminium oxide grain are useful for chip removal and heat dissipation. The special butt joint minimises the effect of vibration across the work surface ensuring a smooth and even finish. The strong X-weight polycotton cloth backing makes the sanding belt both flexible and durable, enhancing the intensity of loading and enabling it to be used in different pressure applications. Ideal for sanding and finishing wood, metal, aluminium alloy, painted surfaces, plastic and fillers. Compatible …

A small rectangular slender file with edges tapered to a point.Both faces double cut for locksmithing and other precision work.Size 150mm (6in)Cut: warding second.TangedAdditional Information:• Type: Replacement File• Cut: Second Cut• Length: 150mm

Manufactured from a high quality carbon steel, this 20" blade packed with 14 PPI hardpoint teeth is the ideal product for producing fine cuts. With a soft-feel ergonomic grip constructed from high impact polystyrene, it emphasises comfort and high performance. Features and Benefits Rigid blade aids in minimising vibrations and whip action when working Ergomonic, soft-grip handle bolsters comfort and indorporates a 45/90 angl guide Blade is manufactured from hardened and tempered carbon steel making it lightweight and durable Handle is constructed of a high impact polystyrene for product longevity and resistance to wear and tear Typical Applications Ideal for use when cutting UPVC and other hard …

Double cut teeth for filing slots, keyways, grooves, rectangular holes, internal corners and for fine-adjustment of cutting tools. Slightly tapered towards tip for surface filing. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: square bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm

The T0836A 150mm Mini Hacksaw from C.K Tools is ideal for those small cutting jobs in metal and wood. With a Board handle for extra comfort whilst cutting. This Mini Hacksaw is designed for cutting wood and metal and is robust and reliable. The Blade size of the hacksaw is 150mm. This mini hacksaw comes with a special screw tensioner for fast & simple blade fitting. Main Features: Screw adjustment for quick and easy blade tensioning Board handle for extra comfort Robust and reliable Cast aluminiun frame for strength Technical Specifications: Blade Size: 150mm Dimensions: 26 x 9 x 2 cm Frame Material: Cast aluminum 1 Year Guarantee Included

Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: hand bastard.Tanged.Additional Information:• Type: Replacement File• Cut: Bastard• Length: 200mm