Soldering Tools

DRAPER 85998 - 40W Soldering Iron Tip Point

Soldering Accessories / Soldering Technique Soldering / min. Temperature 227 °C / Max. Temperature (°C) 310 °C / 0.25 kg

Everything you need to solder without the need for mains power or butane gas. Power is provided by an internal Li-ion battery for up to 50 minutes of soldering from a full charge. A quick 5 minute charge can provide 90 seconds of use if the battery isn't charged when you go to use it. An integrated LED provides light to what you are soldering, and safety features include overcharge, over discharge, and short circuit protection. The kit comes complete in a handy carry case with one 12W soldering tip (500 Degrees C), one 30W soldering tip (600 Degrees C), hot knife, sponge, and solder. To charge, simply plug it into an available USB power source. ESD safe. Features: 30W/12W Tips Hot Knife …

WEP #948N Desoldering Nozzles Set 4 Pcs (0.8mm, 1.0mm, 1.2mm, 2.0mm) is ONLY Compatible with WEP 948-III Desoldering Iron If you are uncertain about compatibility with your WEP station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

For use during MIG welding, these plug weld pliers from Power-Tec provide the user with even better weld penetration and don't allow burning through even thin panels when welding. They clamp and support the weld area for greater accuracy, safety and finish.

These nozzles are ONLY compatible with WEP 929D-V 2 IN 1 Desoldering Iron Electric Solder Sucker. If you are uncertain about compatibility with your WEP station, contact us via the Buyer-Seller Messaging System and we will confirm compatibility for you. Our desoldering nozzles set comes with nozzles in 4 different diameters 0.8mm/ 1.0mm/ 1.2 mm/ 1.5mm. You can desolder through-hole components of different sizes with this variety pack. International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Temperature control dial to set and maintain temperatures from 400 degrees up to 900 degrees Rapid heat up in under 90 seconds Onboard LED indicator for heating, ready to use, and cooling statuses 3 ft. reach to access hard to reach areas in a variety of applications Onboard iron holder for safe and convenient storage Change tips with easy tool-free tip change Cordless convenience allows you to take the tool directly to the work space Part of the RYOBI 18V ONE+ System of over 260 cordless tools

Temperature control dial to set and maintain temperatures from 400 degrees up to 900 degrees Rapid heat up in under 90 seconds Cordless convenience allows you to take the tool directly to the work space Includes: (1) PCL946 18V ONE+ Cordless 120-Watt Soldering Iron, (1) fine point tip, (1) solder coil, and operator's manual

Handy soldering kit complete with torch stand. Includes blow torch attachment, soldering tip and solder.Handy soldering kit complete with torch stand.Includes blow torch attachment Butane powered.Soldering tip and solder.Torch temp 1300C.GS certificated.

The Jobsite XL trolley not only provides easy mobility but also storage for your welding machine. Torch and earth clamp are also easy to access with the trolley. The trolley is compatible with most welding machines that fit the 584mm wide x 331mm deep base plate but spefically for the following GYS machines: MMA - Progys CEL 250 TRI Progys Flex 250CEL Exagon 400. TIG - TIG DC 160/168/200/250/300/Titan400 Protig 201/201L/220 Titanium400 AC/DC. MIG - Multiweld 250TCMultipearl 200-2 & 200-4 Plasma Cutters; Cutter 25/35/70/85TRI/125TRI/Neocut105. Optional gas bottle support tray is available (010129551).

Table mount for filter device Easy Arm 1 Quick and easy to use

Magnification: 5 x / 10 x Flexible lamp arm for specific alignment LED lighting Flexible magnifying glass with lighting Ideal for precision soldering

Max. Temperature (°C) 580 °C / Warm-up Time 45 s / Accu operation / 2.6 Ah Battery Capacity

The Scheppach WSE1100 is a lightweight and highly portable welder for the DIY enthusiast. It features a maximum 160 amp welding current with inverter technology for smoothest welding and longer duty cycle. The user will also benefit from the innovative Hot Start and Arc Force functions which ensure an increased striking voltage and then monitors the welding current to ensure stable welding. Supplied with electrodes, chipping hammer with wire brush, and protective welding shield, the WSE1100 is the ideal machine for all your DIY welding projects. Features and Benefits Innovative technology - With the WSE1100, you can enjoy the easiest and smoothest welding of alloy, stainless steel and cast …

Heat up time in sec 120 Long-life tip 230V power supply 40W power rating

Cast iron welding vice to aid welding a 90° angle. Self centring swivel jaw allows two different size workpieces to be accurately welded. Copper plated spindle for resistance to weld spatter. Can be bench mounted through holes in the base.

'J' welding clamp, manufactured for use on flanged lap joints. With 0-15mm adjustment.

15cm Length 8cm Width 20cm Height

This 929D-V desoldering iron kit integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is an great choice. This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering. Different …

Features: 1. An ideal replacement for factory handles on the heat guns 2. The handle comprises heating core, magnetic switch, temperature sensor and power cord 3. Made with high-grade material and fine workmanship, it is solid, reliable and durable 4. Rotary design is suitable for 858, 858D, 878A, 878D and 878D+ unsoldering work bench 5. Ultra long power cord allows for flexible and comfortable use Specifications: 1. Mode: 858 8858D 878A 878D 878D+ 2. Color: Black 3. Dimensions: (9.45 x 1.57 x 0.79)'' / (24 x 4 x 2)cm 4. Weight: 7.34oz / 208g