Routers & Trimmers Trend

This twelve piece cutter set contains a range of the most widely used cutters for decorative woodworking. An Ideal Starter Set. CONTENTS 2x Straight 1/4" & 1/2". 1x Dovetail 104 x 1/2". 2x Guided Round Over Radius 6.35mm & 9.5mm. 1x Guided Chamfer 45. 1x Guided Rebater 9.5mm Rebate. 1x Guided Trimmer 2.7mm. 1x Guided Cove Radius 6.3mm. 1x 'V' Groove 45. 1x Core Box Radius 6.35mm. 1x Guided Ogee Radius 4mm. Supplied in Plastic Carry Case.

The Trend SET/SS31X1/4TC Router Cutter Set contains a range of popular tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains 9 x Non-bearing Straight Cutters 5 x 12mm, 6 x 20mm, 8 x 20mm, 10 x 20mm, 12 x 20mm, 14 x 20mm, 16 x 20mm, 18 x 20mm and 20 x 20mm 2 x Non-bearing Core Box Cutters R3.2mm and R6.35mm 2 x Non-bearing 45 V-Groove Cutters 9.5mm and 12.7mm 1 x Non-bearing Dovetail Cutter 9.5mm/13mm 1 x Non-bearing Classic Panel Cutter 12.7mm 4 x Guided Round Over Cutters R3.2mm, R6.3mm, R7.9mm and R9.5mm 4 x Guided Ovolo Cutters R3.2mm, R6.3mm, R7.9mm and R9.5mm 1 x Guided 45 …

Trend SET/SS11X1/2TC 6 Piece Router Starter Cutter Set 1/2 Inch Shank TCT This six piece cutter set contains a range of Tungsten Carbide Tipped cutters for decorative woodworking. Features: Suitable for various materials such as softwood, hardwood, chipboard, plywood and MDF Excellent value for money Supplied in a robust secure plastic carry case with a handle grip Specification: 1 x Straight 6.3mm dia x 16mm cut 1 x Straight 12.7mm dia x 25mm cut 1 x V-groove 45 deg x 12.7mm dia 1 x Guided round over R6.35mm 1 x Guided round over R9.5mm 1 x Guided ogee R4mm

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT. Dimensions Shank 1/4in Cutting Diameter (D) 6.3mm Cutting Length (C) 28.0mm

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber, MDF, plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing, creating time-saving benefits. No clamps required. This replacement stepped drill bit for the Pocket Hole Jig has a diameter of 9.5mm (3/8in).

The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortice and dead locks with up to 3in deep mortices and a 7/8in or 1in face plate. Deeper mortices can be achieved with a suitable size of auger bit. Also suits face plate on a 1in mortice latch. NOTE. Use on doors 34 to 58mm thick

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic. Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications Set of …

Trend FAST TRACK Replacement Stones are made from monocrystalline diamond with a unique diamond cross relief pattern for optimal abrasion rates. This helps to maximise sharpening efficiency and reduce clogging. Diamonds are held by nickel plating to a steel substrate, with ABS plastic base. This Trend FTS/S/R FAST TRACK Replacement Stone has the following specification Grade Extra Extra Coarse Grit 100 (nom. 60 micron) Dimensions 75 x 24 x 4mm Colour Grey

The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.

Trend DG/JIG Draining Groove Jig The Trend DG/JIG Draining Groove Jig is designed for routing draining grooves in solid timber for Belfast type sinks. This well made Jig is a solid, hard-wearing piece of 12mm thick CNC machined phenolic measuring 59 x 63cm. It features 3 removable sloping runners for support and a cutter diameter check hole. Does not include cutter or guide bush. Features: Provides a 0.5-degree fall Grooves at 50mm pitch and 455mm long Sight marks for lining up Three removable sloping runners for support Cutter diameter check hole Fixing holes for user-made stops for repetition work Specification: Fall: 0.5 degree Groove pitch: 50.0 mm Groove length: 455 mm Slat …

Tungsten Carbide Tipped Circular saw-blades designed for a professional finish. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. High grade alloy steel plate body precision ground to maintain flatness. Micro-granular Tungsten Carbide Tipped to allow cutting of abrasive materials.

Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates. Spring loaded high speed steel (HSS) anvil for a sharp cut and long life. Light weight aluminium body design. Can be used with the Trend Hinge Jig. Can be resharpened.

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety & lsquoK&rsquo mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work. Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification Diameter 24mm Cutting Depth 15mm Bearing 16mm Shank 1/4in

Trend C172X1/2TC Two Flute Straight Router Cutter 12mm x 1/2" Shank The Trend C172X1/2TC straight cutter is suitable for a wide range of applications including engraving, grooving & rebating on materials such as softwoods, hardwood, and MDF. The microgranular TC tips ensure perfect sharpness and long life. Features:
- Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising
- Use on softwoods, hardwoods, MDF, plywood, and chipboard
- Cutter has a bottom cut feature
- Highly ground tip ace maintains its edge
- PTFE non-stick coated body
- Extra long shank
- Suitable for all makes of router Specification:
- D1: 15/32 inches
- D1: 12 …

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety & lsquoK&rsquo mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

Trend Craft Pro 1/2in shank worktop joint cutter - 12.7mm diameter Two Flute Carbide tips. 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. Cut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: …

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard. The Trend C153D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling and has the following specification …

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boards Use bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mm Suitable for 13-18 mm boards Use bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mm Suitable for 19 mm + board Use bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mm Shank = 1/2in

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at 90. With two carbide TCT cutting tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. For use on all man-made boards such as medium density fibre board, chipboard, and also natural timbers and most plastics. This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification Cutting Diameter 22.3mm (7/8in) Cutting …

Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. Specially designed PTFE coated bodies to minimise heat and resin build-up and Micro-granular Tungsten Carbide tips ensure a premium finish in hard and soft woods, and abrasive man-made boards such as ply, MDF and chipboard, to meet the needs of the woodworker and tradesman for quality and performance. All Trend router cutters also have a safety & lsquoK&rsquo mark insertion indicator on each shank to ensure a quick and easy set up whether for hand held …

Used for trimming plastic or plywood overlays, also for trimming plastic or plywood overlays.

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. D 3/8 inch D 9.5 mm C 1/2 inch C 12.7 mm B 9.5 mm A 90 degrees Shank Diameter 1/4 inch

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers, 'K' marked to ensure safe working practices. Supplied with two bearings for Round Over or Quirked Ovolo moulding for additional options for fine detailing on boxes and model making work.

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. (D= Cutting Diameter, C= Length of Cut, R= Radius)