Trend Lock Jig for Router TRELOCKJIG

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Supplied with templates to suit most common sash mortises and dead locks Minimal set up time and easy to use Fast, clean results on 34mm to 58mm thick doors Supplied with 12 face plate templates and 4 mor... moretise plate templlates

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate result... mores on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Contents: 1 x Guide Bush Collar 12 x Face Plate Templates 5 x Mortise Templates 6 x Spacer FingersFeatures & Benefits• For cutting commonly needed mortise & face plate recesses • Includes 16 interchangeable templates • Suitable for most common sash mortises and dead locks • Fast, clean and accurate results on doors 34mm - 58mm thick • Additional templates available separatelyContents• Guide Bush Collar • 7/8"x 1/8" (22.2x156 mm) Face Plate Template • 7/8"x 6 " (22.5x152.5 mm) Face Plate Template • 1"x 4 3/4" (25.4x121 mm) Face Plate Template • 1"x 5" (25.4x127.5 mm) Face Plate Template • 1"x 5 1/4" (25.4x133.5 mm) Face Plate Template • 1"x 5 3/4" (25.4x145 mm) Face Plate Template • 1"x 6" (25.4x153 mm) Face Plate Template • 1"x 6" (25.4x156.5 mm) Face Plate Template • 1"x 6 1/2" (25.4x165.5 mm) Face Plate Template • 1"x 7" (25.4x177 mm) Face Plate Template • 1"x 2 1/4" (25x57.5 mm) Upper Face Plate Template • 1"x 2 1/4" (26x56.5 mm) Lower Face Plate Template • 1"x 6 3/8" (25.6x162mm) Face Plate Template • 5/8" x 2 7/8" (16x72 mm) Mortise Template • 5/8" x 4 1/4" (16x107 mm) Mortise Template • 3/4" x 3 1/8" (19x78 mm) Mortise Template • 3/4" x 4 1/4" (19x109 mm) Mortise Template • Spacer Fingers (x6)