Chargers & Jump Starters Victron Energy

Ultra-high efficiency charger ´´green´´ battery.With an efficiency of up to 95% these chargers produce three to four times less heat than the industry standard.And after the battery is fully charged, the power consumption of 0.5 watts, which is five to ten times better than Industriestandard.Im delivery Included is reduced.Terminals and eyelets M8.5 year warranty.Durable, safe and quiet.low thermal load on the electronic components.Dear against the ingress of dust, water and chemicals.Overheating protection, the output current is reduced when the temperature rises to a maximum of 60 ° C, however, the charger is not failed.Chargers are absolutely geräuschslos:no fan or other moving parts.Recond…

Protects the battery against excessive discharge and can be used as a system on/off switchThe Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch.
12/24 V auto rangingThe Smart BatteryProtect automatically detects system voltage one time only.
Bluetooth: programming made easyWhen using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If …

Victron Energy Skylla TG 24/80 (1+1) Battery Charger.Two independent outputs:one full and one limited to 4 amps.The charging voltage can be precisely adjusted to suit any battery system.The charger input is 230 V at 50/60 HZ.The charging voltage can be measured directly at the battery terminals to compensate for voltage loss due to cable resistance.An external temperature sensor allows the charging voltage to be reduced when the battery temperature rises.Skylla TG 24/80 Battery Charger (1+1).Perfect chargers for all types of batteries.Skylla TG chargers are lightweight and compact thanks to high-frequency technology.The charging voltage can be precisely adjusted to suit all types of batteries,…

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Voltage: 12 / 24 V
Power …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

The Victron Energy Quattro 24/3000/70-50/50 230V VE Bus Charger is a high-quality, versatile charger designed for a wide range of applications. This black charger features a 24V input voltage, 3000W continuous output power, and a 70A charging capacity, making it ideal for use in off-grid and backup power systems.The VE Bus Charger is equipped with advanced power management features, including adaptive battery management and multiple charging modes, to optimize battery performance and prolong their lifespan. The charger also features a built-in transfer switch, allowing seamless switching between AC power sources.With its compact and durable design, the Victron Energy Quattro is suitable for …

The VICTRON ENERGY Orion TR Smart Charger Blue is a high-quality, compact charger designed for marine and mobile applications. This charger is equipped with advanced technology that allows it to efficiently charge and maintain batteries, ensuring a longer battery life and improved performance. The bright blue exterior adds a sleek and modern look to any charging station. With its smart charging capabilities, the VICTRON ENERGY Orion TR Charger is able to adapt to different battery types and voltages, making it versatile and user-friendly. Whether you're on the water or on the road, this charger is the perfect solution for keeping your batteries charged and ready to go.

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points …

This device will bring 4G LTE-M connectivity to all Victron Energy VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years
The GlobalLink 520 comes with two communication ports, which allows connecting up to two VE.Direct devices. With two digital inputs that also act as pulse counters and a remote controllable relay, it's a perfect solution to monitor and control your installation
Monitor battery state of charge, power consumption, power harvest from PV, generator and grid or check temperature measurements. Follow up on alerts and perform diagnostics checks
RuuviTag support: These sensors connect via BLE and are easy to setup via VictronConnect. All …