Chargers & Jump Starters Victron Energy

Victron Energy M6 eyelet connector with fuse is an accessory of the Blue Power IP65 Charger with DC connector
This connector features M6 eyelets for connection to the battery and an in-line, splash-proof fuse holder fitted with a 30 amp standard blade (ATO) fuse for protection against accidental shorts
This connector is useful if you have a hard-to-reach battery as you can leave the eyelets permanently connected to the battery and just plug the charger into the connector when required
It's also a good option if you need M6 eyelets for your battery connections rather than the M8 eyelets
The traffic light system shows your battery charge status simply and clearly

Charger Accessories / Length of Cable 200 cm

The indicator panel shows the battery charge status of the battery.Is an accessory for boots Blue Smart IP65 and IP65 Blue Power chargers.I suitable for lead-acid batteries of 12 V (flooded, GEL, AGM).

Ultra-high efficiency charger ´´green´´ battery.With an efficiency of up to 95% these chargers produce three to four times less heat than the industry standard.And after the battery is fully charged, the power consumption of 0.5 watts, which is five to ten times better than Industriestandard.Im delivery Included is reduced.Terminals and eyelets M8.5 year warranty.Durable, safe and quiet.low thermal load on the electronic components.Dear against the ingress of dust, water and chemicals.Overheating protection, the output current is reduced when the temperature rises to a maximum of 60 ° C, however, the charger is not failed.Chargers are absolutely geräuschslos:no fan or other moving parts.Recond…

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Voltage: 12 / 24 V
Current: …

Victron Energy BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
Maximum continuous load current 65 amp and Peak current (during 30 seconds) 250 amp
12/24-Volt auto ranging - The Battery Protect automatically detects system voltage
The Battery Protect can be set to engage / disengage at several different voltages, the seven segment display will indicate which setting has been chosen
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation

The Victron Energy 12/24V-100A Battery Protector is a high-quality device designed to protect electronic batteries in various applications. Featuring a sleek black color, this battery protector provides essential functionalities to ensure the smooth and safe operation of your battery-powered electronics.This battery protector is capable of handling both 12V and 24V battery systems, making it highly versatile for different types of setups. With a maximum current capacity of 100 amps, it can effectively protect batteries in demanding environments, such as in off-grid power systems, boating, camping, or automotive applications.Equipped with advanced electronics, the Victron Energy 12/24V-100A Battery …

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current (A): 20.0
UK/EU Power …

Protects the battery against excessive discharge and can be used as a system on/off switchThe Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine. The on/off input can be used as a system on/off switch.
12/24 V auto rangingThe Smart BatteryProtect automatically detects system voltage one time only.
Bluetooth: programming made easyWhen using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set. Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual). If …

The service life of an expensive battery bank can be substantially shortened due to state of charge unbalance. One battery with a slightly higher internal leakage current in a 24 V or 48 V bank of several series/parallel connected batteries will cause under-charge of that battery and parallel connected batteries, and over-charge of the series connected batteries. Moreover, when cells or batteries are connected in series, they should all have the same initial state of charge. Small differences will be ironed out during absorption or equalize charging, but large differences will result in damage due to excessive gassing (caused by overcharging) of the batteries with the higher initial state of …

The Blue Smart Charger IP65 is the new professional battery charger with built-in Bluetooth.The Blue Smart IP65 charger can be used in devices in your workshop and motor vehicles, as (classic) cars.motorcycles.boats and motorhomes.

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …