Drill Chucks Wera

Bits for Pozidriv* screws with Torsion zone to combat premature wear. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.* Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 855/1 TZ bits, PZ 1 x 25 mm

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits.

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits. 1/4in Hexagon drivePozidriv 3 point x 25mm

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3.Features and Benefits:• Suitable for Pozidriv screws• Torsion zone for absorption of peak loads• Enhanced service life of the bits• Particularly hard for semi-hard materials• 1/4" hexagon drive (Wera connecting series 1)Contents:855/1 TH bits, PZ 2 x 25 mm

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3.Features and Benefits:• Suitable for Pozidriv screws• Torsion zone for absorption of peak loads• Enhanced service life of the bits• Particularly hard for semi-hard materials• 1/4" hexagon drive (Wera connecting series 1)Contents:855/1 TH bits, PZ 1 x 25 mm

High quality bits for Pozidriv* screws. Reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Especially for drywall construction and suitable for drywall screws. Pozidriv*. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • With reduced shaft diameter • Particularly suitable for drywall screws • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 855/1 RZ bits, PZ 2 x 25 mm

855/1 Impaktor Insert Bit Pozi PZ3 x 25mm Carded
Suitable for Pozidriv
Impact technology for an above-average service life
Particularly suitable for use with customary impact drivers

Suitable for Bosch, Fein, Holz Her, Lecreux, Metabo et al
Ideal Product
WERA Pozidriv bits, impact item no. 5073921001

BiTorsion bits for Pozidriv* screws with elastic Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Particularly hard for semi-hard materials &…

The Wera BTH BiTorsion Pozi Extra Hard Bits for use with all combi and drill drivers, for impact tools use Impaktor bits. Significantly extend service life, ideal for use with screws into general construction materials and timbers. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life.

The Wera BTH BiTorsion Pozi Extra Hard Bits for use with all combi and drill drivers, for impact tools use Impaktor bits. Significantly extend service life, ideal for use with screws into general construction materials and timbers. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life. These Wera BTH BiTorsion Pozidriv Bits have the following specification Size PZ1 x 25mm Pack Size 10

Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase i…

Diamond coating for secure fit in the
1/4" hexagon drive
Diamond coating for secure fit in the

1/4in Hexagon drive x 25 mm Card of 1 x Pozidriv 1 point.

This BDC screwdriver bit possesses a 1/4in hexagon drive and is suitable for DIN ISO 1173-D 6.3 bit holders. With a BiTorsion construction to ensure long service life, a diamond-coating for secure screw fit and an output colour coding (black = Pozidriv) and large stamp to enable the desired bit to be easily located, the product is designed for heavy duty but delicate work. Features and Benefits Suitable for Pozidriv fasteners which are commonly used in most industries BiTorsion zone is designed to absorb peak loads and ultimately decrease premature wear and tear Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out and ensure work is undertaken …

Tough viscous Wera bits for Pozidriv screws for universal use, with thread drive M 4. Features and Benefits: • Suitable for Pozidriv screws • Ductile and tough for hard materials • Thread drive M 4 (Wera connecting series 11) Contents: 855/11 Bits, PZ 2 x 33 mm

Screwdriver Bit

High quality bits with reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Come with rough ribs (anti cam-out feature, ACR) to prevent any slipping out of the screw head. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For Phillips screws • ACR (anti cam-out feature) to prevent any slipping out of the screw head • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 853/4 Harpoon ACR® bits, PH 2 x 152 mm

Wera 851/4 Z Tough Phillips Bit with a 1/4in hexagon drive. Designed to prevent any premature breakage of the drive tip. The ductile and tough bit is great for use with hard materials. Suitable for DIN ISO 1173-F 6.3 bit holders.

Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For Phillips screws • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 851/4 Z bits, PH 3 x 70 mm

Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For Phillips screws • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 851/4 Z bits, PH 3 x 152 mm

Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For Phillips screws • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 851/4 Z bits, PH 2 x 70 mm