Drill Chucks Wera

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TZ bits, PH 2 x 50 mm

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Particularly hard for semi-hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TH bits, PH 1 x 50 mm

High quality bits for Pozidriv* screws. Reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Especially for drywall construction and suitable for drywall screws. Pozidriv*. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • With reduced shaft diameter • Particularly suitable for drywall screws • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 855/1 RZ bits, PZ 2 x 25 mm

High quality bits for Phillips screws with reduced shaft diameter for low-lying screw connections. Countersinking of screws without any surface damage. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For Phillips screws • With reduced shaft diameter • Profiled version • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 851/1 RH bits, PH 2 x 25 mm

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TZ bits, PH 3 x 50 mm

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TZ bits, PH 1 x 50 mm

The Wera Impaktor 25mm Phillips bits with 1/4in hexagon drive. Designed for use with all heavy-duty impact machines and can be used on any machine. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Use with Impaktor holders to complete the system. Size PH3 Carded

1/4in Hexagon drive x 25 mm Card of 1 x Phillips 3 point. Note: Image is for illustrative purposes only and may differ from the actual product

High quality bits for Phillips screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For Phillips screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Diamond coating for a secure fit in the s…

High quality Wera bit for Phillips screws. It has a sharp-edged profile that ensures a dependable transfer of power between the bit and screw by breaking off the paint e.g. when screw profiles are covered in it. Extra-hard design: ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For Phillips screws • Profiled version • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 851/4 A bits, PH 2 x 50 mm

3855/1 TS Pozidriv Torsion Stainless Insert Bit PZ2 x 25mm Carded

Wera Stainless Torsion Phillips Bits prevent rust on Stainless Steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits. Application Suitable for Phillips screws. 1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173. Tip DIN 5260, ISO 8764, Stainless Steel, INOX.

Diamond coating for secure fit in the
1/4" hexagon drive
Diamond coating for secure fit in the

Wera Stainless Torsion Pozi Bits prevent rust on Stainless Steel fixings caused by contamination from conventional steel tools. Vacuum ice-hardened to the same strength as conventional steel tools, and so suitable for tough, industrial use. Wera Stainless bits feature a unique Torsion zone, extending bit life over standard bits. Use with Wera stainless Rapidaptor bit holder. Application Suitable for Pozidriv-screws. 1/4in Hexagon Drive, DIN 3126-C 6,3, ISO 1173. Tip DIN 5260-PZ, ISO 8764-PZ, Stainless Steel, INOX.

Wera Impaktor Hex-Plus bits 25mm long with 1/4in hexagon drive , suitable for DIN 3126-F 6.3, ISO 1173 bit holders. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry, particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. 6mm Hex-Plus x 25mm Carded

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexagon drive, 25mm bits.

The Wera Impaktor 25mm Phillips bits with 1/4in hexagon drive. Designed for use with all heavy-duty impact machines and can be used on any machine. The Impaktor technology ensures an above-average service life even under extreme conditions thanks to the best possible utilisation of the material properties and optimally designed geometry. Particularly suitable for use with conventional impact drivers, the rough diamond coating reduces the danger of any slipping out of the screw head due to the enhanced frictional resistance. Use with Impaktor holders to complete the system. Phillips PH3 x 25mm Carded

Wera Torsion Extra Tough (TZ) Phillips bits are hard wearing, with long service life. Ideal for metal, hard joining applications and threaded fasteners. Use with Wera BiTorsion Rapidaptor for extended service life. Card of 2 x Phillips PH2.

Bits for Pozidriv* screws with tiny diamond particles on the bit tip. This ensures a secure fit of the bit in the screw, reduces the contact pressure required and lowers the risk of slipping. Comes with Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd. Features and Benefits: • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase i…

Suitable for Bosch, Fein, Holz Her, Lecreux, Metabo et al
Ideal Product
WERA Pozidriv bits, impact item no. 5073921001

3855/1 TS Bits, stainless Application: Suitable for Pozidriv*)-screws Drive: 1/4in Hexagon, DIN 3126-C 6,3, ISO 1173 Tip: DIN 5260-PZ, ISO 8764-PZ, stainless steel, INOX

High quality Wera bit for Phillips screws. It has a sharp-edged profile that ensures a dependable transfer of power between the bit and screw by breaking off the paint e.g. when screw profiles are covered in it. Extra-hard design: ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits: • For Phillips screws • Profiled version • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents: 851/4 A bits, PH 1 x 50 mm

High quality bits out of stainless steel for cross-recess screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For Phillips screws • Stainless Steel Bits • Solution to the extraneous rust problem: fasten stainless screws with stainless tools • Vacuum ice-hardened • Torsion design against premature wear Contents: 3851/1 TS bits, stainless, PH 2 x 25 mm

1/4in Hexagon drive x 25 mm Card of 1 x Pozidriv 1 point.