Other security and video Axis

Discreet and flexible
AXIS FA4115 Dome Sensor Unit is designed for discreetness and flexibility and should be used with the separately sold AXIS FA54 Main Unit. You can mount the palm-sized sen more→sor unit on the surface of walls or ceilings and you can manually pan tilt and adjust the field of view. It is ideal for indoor use in stores banks hospitals and airports.

AXIS FA4115 comprises an image sensor with 1080p resolution (1920 x 1080 pixels) and a varifocal lens that provides between a 53 and 99 horizontal field of view. In tele mode a close-up view allows finer details to be captured. In wide mode more of a scene can be covered. Support for Axis Corridor Format enables optimal coverage …

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for more→poles between 100-410 mm (4-16 in) in diameter.

AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.

When installing an Axis fixed dome or fixed bullet camera there is no need for additional accessories like pendant kits; AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution.

- Suitable for wide range of pole diameters
- Safe and easy to install
- IK10-rated vandal resistance …

AXIS T94P01L Recessed Mount enables sleek elegant and discreet recessed ceiling installations together with AXIS M5525-E PTZ Network Camera. It is suitable for air-handling spaces in indoor installati more→ons as the back box is made of metal and has a 3/4 (M25) hole for protected cable-runs in conduits. When the camera is attached to the recessed mount it is embedded into the ceiling revealing only the camera dome and the low-profile cover ring which is easily repaintable.

AXIS T91B53 Telescopic Ceiling Mount is compatible with Axis pendant kits and camera holders with 3/4 conduit interface.

Easy to install. Easy to adjust
AXIS T91B53 Telescopic Ce more→iling Mount is easy to install and just as easy to adjust to the perfect length for your installation. Its telescopic design means the pipe component can be regulated between 1 meter (3.2 ft) and 1.8 meters (6 ft) at 10 cm/4 intervals right out-of-the box.

Food & grocery stores
AXIS T91B53 mount is ideal for retail and commercial environments where a fixed dome or a fixed box camera need to be installed under high ceilings. It is designed especially for environments with lighting and ventilation fixtures under …

Axis 01190-001 security camera accessory Base unit

AXIS T94C01L Recessed mount is a Indoor mount for drop ceiling installations. It comes with a single-screw ceiling attachment for quick and easy installation.

AXIS T94C01L Recessed Moun more→t enables sleek elegant and discreet recessed ceiling installations of Axis indoor cameras Compatible with AXIS M42 series and AXIS Companion Dome mini LE.

It features a patent-pending single-screw ceiling attachment design which makes the installation quick and easy without having to remove the ceiling tile. Axis fixed dome camera attached to the recessed mount is embedded into the ceiling revealing only the camera dome and the low-profile cover ring.

AXIS T94C01U Universal mount is a very flexible mount offering 4-in-1 mount accessory. AXIS T94C01U Universal mount i is compatible with AXIS M42 series and AXIS Companion Dome mini LE. Pole mounting more→straps are available separately.

Use as a pendant kit
Pendant kit to enable use of Axis mounting products featuring a 3/4" pipes.

For use as a conduit back
Conduit back box for 1/2" or M20 pipes. Features the 1/2" ACI interface to enable use of ACI adapters. There is an integrated female tripod thread for use of standard camera stands or holders.

For use as a pole mount
Stainless steel pole mount compatible with cameras with standard tripod thread. AXIS Steel Straps TX30 are not included …

Roomy compartment for protection and connectivity

AXIS T91G61 Wall Mount Grey is specially designed to accommodate and safely protect against water ingress inside the mount such as mids more→pans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data.

Axis 01445-001 security camera accessory Mount

Axis 01446-001 security camera accessory Mount

AXIS T94V01C Dual Camera Mount is a highly versatile accessory that allows back-to-back installation of two Axis cameras for panoramic coverage. It is compatible with a wide range of Axis network came more→ras including dome cameras box cameras and bullet cameras. It can be easily combined with diverse Axis mounting accessories with 1.5 NPS threaded interface for mounting on walls poles and under ceilings. AXIS T94V01C Dual Camera Mount has an IK10 rating for impact resistance which safeguards it against vandalism. It is suitable for both indoor and outdoor use.

- Save time when installing multiple Axis cameras
- Drill fewer holes in walls
- Compatible with a wide range of Axis cameras and Axis …

Hp - Psg Top Config

AXIS M30 SKIN COVER A BLACK 4P

Tamron 5 MP Lens P-Iris 8-50 mm F1.6

This Tamron varifocal 5 megapixel CS mount lens has a focal length of 8 50 mm and the fast aperture (F-number) is F1.6. The P-Iris lens is speciall more→y made for cameras with support for P-Iris technology and supports cameras with up to 5 megapixels. The lens is compatible with selected cameras from AXIS P13 Network Camera Series.

Axis 01470-001 security camera accessory Mount

The outdoor-ready AXIS T91B67 Pole Mount has a 1.5" NPS threading for a wide range of Axis pendant kits for Axis fixed dome and panoramic cameras. Thanks to its impact-resistant and outdoor-proven mat more→erial the mount can be used in both indoor and outdoor environments.

AXIS T91B67 is intended for poles with a diameter between 65165 mm (2 1/26 1/2 in) and also for beams. It features 3/4" conduit side entries for protected cable runs and a closed back with cable gasket for protection against insect infestation.

The pole mount is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.

- Robust and safe pole installation …

Axis 01512-001 camera mounting accessory

AXIS T94N01D Pendant Kit

An indoor/ outdoor pendant kit for mounting a camera on 1.5" NPS threaded brackets. The kit allows AXIS P3717-PLE Network Camera to be mounted on poles parapets more→and outer corners using many AXIS T91 mounting accessories.

AXIS Fixed Box IR Illuminator Kit A

AXIS Fixed Box IR Illuminator Kit A is an optional IR kit accessory designed to fit AXIS P1375-E Network Camera. It enables cost-efficient surveillan more→ce in pitch darkness and includes power-efficient long-life 850 nm IR LEDs with a range of reach of 50 m (164 ft) or more depending on the scene. The IP66 and IK10-rated IR kit can easily be mounted on the bottom of the casing of AXIS P1375-E.

AXIS M30-PLVE Clear Dome A

Standard clear dome with anti-scratch hard coating. Rubber gaskets included. Compatible with AXISM3057/58-PLVE. 4-piece bulk pack.

DOME A

Flexible mount for drop-ceiling tile grids

Installation that saves time and money

The unique AXIS T91A23 Tile Grid Ceiling Mount allows you to mount Axis cameras along ex more→isting ceiling tile grids in your environment. Reduce installation time and money with no need for drilling or damaging the tile and minimum alteration is required when routing the Ethernet cable through the ceiling. The mount instantly grips the tile grid without needing any tools.

AXIS T91A23 is directly compatible with a wide range of Axis cameras and camera stands. It is cleverly designed to be compatible with the most common ceiling grid rail types and it is suitable beneath square edge and tegular edge tiles. …

AXIS TP3805 WeathershieldN/AN/AOutdoor weathershield for selected AXIS M32/P32 cameras. The underside of the cover is specially coated with matte black anti-reflective coating to prevent reflections f more→rom external light sources. Anti-loss screws included.

Smoked or clear dome with anti-scratch hard coating. Compatible with selected AXIS M32 and P32 outdoor cameras. 4pcs bulk pack.