Other for Security Axis

Axis 01001-001. Type: Sensor unit, Placement supported: Indoor, Product colour: Black, White. Image sensor size: 1/3", Sensor type: CMOS, Resolution: 1920 x 1080 pixels. Tilt angle range: 0 - 90°. Connectivity technology: Wired. Diameter: 8.8 cm, Weight: 112 g...

AXIS T8129-E Outdoor Power over Ethernet Extender provides a smart and easy-to-install solution for extending the range of your network. enabling Axis network video products to be installed at greater distances than 100 m (328 ft) – with no additional power supply. By connecting one extender for every extra 100 m (328 ft) of cable. both Ethernet and PoE can be extended to even greater distances. With its rugged. IP66/IP67-rated enclosure. AXIS T8129-E withstands harsh environmental conditions and challenging temperatures. The two Ethernet ports configure automatically for link speed. duplex and crossover. and the full-rate network throughput is maintained. Axis 01148-001 PoE adapter

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter.

AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.

When installing an Axis fixed dome or fixed bullet camera there is no need for additional accessories like pendant kits; AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution.

- Suitable for wide range of pole diameters
- Safe and easy to install
- IK10-rated vandal resistance …

AXIS T91B47 Pole Mount is designed for both indoor and outdoor use. It is available in two versions one with steel straps for poles between 50-150 mm (2-6 in) in diameter and one with steel straps for poles between 100-410 mm (4-16 in) in diameter.

AXIS T91B47 is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.

When installing an Axis fixed dome or fixed bullet camera there is no need for additional accessories like pendant kits; AXIS T91B47 fits the back side of the camera to ensure a cost efficient solution.

- Suitable for wide range of pole diameters
- Safe and easy to install
- IK10-rated vandal resistance …

AXIS T94P01L Recessed Mount for M55 SeriesAchieve a seamless, professional, and highly secure installation for your surveillance system with the AXIS T94P01L Recessed Mount. Specifically engineered for the AXIS M55 Series PTZ cameras, this mount enables you to recess your camera into a drop ceiling or soffit, leaving only the camer´s dome visible. This discreet integration is perfect for environments where aesthetics are as important as security, such as high-end retail stores, corporate offices, hotel lobbies, and modern residential spaces. The mount provides a clean, unobtrusive look that blends perfectly with its surroundings while ensuring your camera maintains its optimal field of view a…

AXIS T91B53 Telescopic Ceiling Mount is ideal for retail and commercial environments. where a fixed dome or a fixed box camera need to be installed under high ceilings. The telescopic functionality allows the installer to easily and securely adjust the length of extension between 1m/3.2ft to 1.8m/6ft at 10 cm/4” intervals. The base of the telescopic mount is compatible with AXIS T94F01P Conduit Back Box for a safe cabling through 1/2” (M20) conduit pipes. The lightweight and robust ceiling mount can also be installed horizontally on walls when secured with AXIS Safety Wire. Axis 01189-001 security camera accessory Ceiling mounting foot

Optimized to match your camera’s field of viewBased on the latest LED technology. AXIS T90D30 IR-LED delivers more light where it is needed. It generates longer infrared LED illumination distance. minimize light wastage. and prevent overexposure of foreground objects. With interchangeable lenses. the angle of illumination can be optimized to match your network camera's field of view. AXIS T90D30 IR-LED Illuminator comes with a pre-mounted 10º diverging lens. and it includes diverging lenses of 35º. 60º and 80º beam angle. Moreover. an optional 120º diverging lens is available. Axis 01212-001 security camera accessory IR LED unit

Based on the latest LED technology. the new generation of Axis illuminators delivers more light where it is needed. They generate longer illumination distances. minimize light wastage. and prevent overexposure of foreground objects. With interchangeable lenses. the angle of illumination can be optimized to match your network camera's field of view. AXIS T90D35 W-LED Illuminators come with an AC/DC or PoE power input. for easy and flexible installation with PoE midspans or PoE switches. Thanks to integrated green features such as power adjust and telemetry control (on AC/DC model only). Axis illuminators enhance the potential for energy savings. Axis 01218-001 security camera accessory IR LED …

The pan and tilt axes of the illuminator bracket are adjustable. to create a compact and efficient light source for Axis cameras. Axis 01221-001 security camera accessory Mount

Axis 01235-001 security camera accessory Lens

The AXIS T94C01U 4 In 1 Ceiling Mount in white is a versatile and innovative device designed specifically for smart homes, safety, and security purposes. This ceiling mount offers multiple functionalities, making it an ideal solution for various surveillance applications.First and foremost, the AXIS T94C01U ensures the safety and security of your home or business premises. Designed to support AXIS cameras, this ceiling mount allows for the installation of IP cameras for high-quality video surveillance. It provides a stable and secure mounting location to capture clear and detailed footage, enhancing your overall security system.Additionally, the 4 In 1 feature of the AXIS T94C01U adds further …

Black accessory casings for AXIS M42 series. Replaces the original white casings. 4-piece bulk pack. Axis 01245-001 security camera accessory Housing

Roomy compartment for protection and connectivityAXIS T91G61 Wall Mount Grey is specially designed to accommodate and safely protect against water ingress inside the mount. such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data. Axis 01444-001 security camera accessory Mount

AXIS T94J01A Wall mount greyAXIS T94J01A Wall Mount Grey is an aluminum wall mount suitable for AXIS Q6215-LE. It is compatible with Axis ACI 3/4” conduit adapters. and offers six cable entries. Cables can be routed through the back or. by using a conduit connection. from each side or from the bottom. Compatible with AXIS T94N01G Pole Mount Robust and impact-resistant aluminum wall mount forAXIS Q62 Series. Multiple cable entry points for 3/4” (M25) conduit pipes. Suitable for indoor and outdoor use. Color: Urban Grey. Axis 01445-001 security camera accessory Mount

Aluminum Pole Mount for indoor and outdoor installations. for poles with diameter between 100-410 mm (4"-16"). Includes 1 pair of AXIS Stainless Steel Straps 1450mm (57") with TX30 screw interface for ease-of-installation. AXIS T91B57 Wall Mount Grey is compatible with mounts such as AXIS T91G61 Wall Mount Grey. T94J01A Wall Mount Grey. Color: Urban Grey. Axis 01446-001 security camera accessory Mount

AXIS T94V01C Dual Camera Mount is a highly versatile accessory that allows back-to-back installation of two Axis cameras for panoramic coverage. It is compatible with a wide range of Axis network cameras. including dome cameras. box cameras. and bullet cameras. It can be easily mounted to diverse Axis mounting accessories with 1.5” NPS threaded interface. for mounting on walls. poles. and under ceilings. AXIS T94V01C is IK10 rated for impact resistance. which safeguards it against vandalism. Suitable for both indoor and outdoor use. Note: To ensure physical stability. do not use AXIS T94VO1C for single camera installations. Axis 01457-001 security camera accessory Mount

Axis 01461-001 security camera accessory

Axis 01464-001 security camera accessory

AXIS T91A33 Lighting Track Mount is a unique accessory designed for mounting a wide range of Axis cameras and stands on lighting track systems. With no need for drilling. alterations to existing track systems. or running cables inside walls or ceilings. this Axis accessory helps to save time and money during installation. Furthermore. benefit from the flexibility to reposition cameras along the track whenever needed. AXIS T91A33 is compatible with a broad range of universal 3-circuit lighting track systems and common linear trunking systems. It is available in white and black to easily blend in with the lighting track system. Axis 01467-001 security camera accessory Mount

AXIS Tamron 5 MP Lens P-Iris 8-50 mmCategory: Electricity and SmarthomeSubcategory: Security and SurveillanceElevate your professional security system with the AXIS Tamron 5 MP Lens P-Iris 8-50 mm, a high-performance telephoto lens engineered for precision and clarity in demanding surveillance scenarios. Designed specifically for network cameras that support P-Iris technology, this lens unlocks the full potential of your high-resolution security cameras, delivering unparalleled image quality for critical monitoring applications. It is the ideal choice for upgrading or customizing compatible cameras, such as selected models from the renowned AXIS P13 Network Camera Series. Key BenefitsExceptional …

AXIS T91B57 Pole Mount is a high-quality pole mount designed for use with selected AXIS T91 wall mounts and AXIS T98A cabinet series. It is easily adjustable to fit poles with a diameter between 100–410 mm (4–16 in). The pole mount has an IK10 rating for impact resistance. which safeguards it against vandalism. It features a closed back and a cable gasket. which means it is also protected against insect infestation. Axis 01470-001 security camera accessory Mount

Marine-grade (SS 316L) stainless steel straps for marine, underground, and other high corrosion applications. The straps have a TX30 screw interface for easy and safe installation, and no need for special mounting tool.The straps are available in pairs and in different models, depending on the pole diameter:Features:- Marine-grade stainless steel straps- Marine grade stainless steel (SS 316L)- TX30 screw interface- Easy and safe installationSpecifications:AXIS Steel Straps TX30 1450 mm: - To suit poles between 100-410 mm (4-16 in) in diameter- Length: 1450 mm (57´´)- Width: 14.3 mm (0.57´´) - Thickness: 0.68 mm (0.03´´)

Marine-grade (SS 316L) stainless steel straps for marine, underground, and other high corrosion applications. The straps have a TX30 screw interface for easy and safe installation, and no need for special mounting tool.The straps are available in pairs and in different models, depending on the pole diameter:Features:- Marine-grade stainless steel straps- Marine grade stainless steel (SS 316L)- TX30 screw interface- Easy and safe installationSpecifications:AXIS Steel Straps TX30 570 mm: - To suit poles between 50-150 mm (2-6 in) in diameter- Length: 570 mm (22.5´´)- Width: 14.3 mm (0.57´´) - Thickness: 0.68 mm (0.03´´)

The outdoor-ready AXIS T91B67 Pole Mount has a 1.5" NPS threading for a wide range of Axis pendant kits for Axis fixed dome and panoramic cameras. Thanks to its impact-resistant and outdoor-proven material the mount can be used in both indoor and outdoor environments.

AXIS T91B67 is intended for poles with a diameter between 65165 mm (2 1/26 1/2 in) and also for beams. It features 3/4" conduit side entries for protected cable runs and a closed back with cable gasket for protection against insect infestation.

The pole mount is tightened with two marine-grade (SS316L) stainless steel straps with TX30 screw interface for ease and secure installation.

- Robust and safe pole installation …