Other security and video Axis

Parapet installation with telescopic flexibility

Made for any parapet

Being the first telescopic parapet on the market AXIS T91D62 Telescopic Parapet Mount helps installer to adjust the arm length of the mount. This is useful when the camera needs to see above thick parapets or any obstructive elements on the facade of the building.

Wall or parapet

AXIS T91D62 Telescopic Parapet Mount can also be used as a wall mount when there is a requirement to place the camera further out from the wall compared to standard mounts.
AXIS T91D62 Telescopic Parapet Mount

Swivel functionality

Its ability to swivel round its own axis 180 degrees allows installers to install and maintain the …

AXIS F8212 Trim Ring sold in packs of 10 enables AXIS F1005-E/F1035-E Sensor Units and AXIS P1214-E/P1224-E Network Cameras to be recessed mounted and easily secured on a glass plastic or metal panel. For AXIS F1005-E the thickness of the panel should not exceed 11.5 mm (7/16 in.). For AXIS F1035-E/P1214-E/P1224-E the thickness of the panel should not be more than 8.5 mm (5/16 in.). The cover rings diameter is 4.5 cm (1 3/4 in.).

Quick connection and room for more

Roomy compartment for protection and connectivity

AXIS T91G61 Wall Mount is specially designed to accommodate and safely protect against water ingress inside the mount such as midspans and media converters. The pre-mounted Ethernet cable with IP66 RJ45 connector (with gasket) helps quickly and easily connecting power and data to most of Axis PTZ network cameras.

Beautiful and yet strong

Thanks to its impact-resistant and outdoor proven material AXIS T91G61 Wall Mount suits all environments both indoors and outdoors. AXIS T91G61 has the same hole pattern as the standard Axis PTZ wall mount and for retrofit a pattern that matches Pelco's PTZ camera …

This accessory enables AXIS F1035-E Sensor Unit to be mounted in the ceiling for overviews of a small room or parts of a larger room (for instance over high-value goods in a retail environment). It is repaintable to make it easier for the unit to blend in with the environment. The diameter of the visible parts is 54 mm.

Aluminum wall mount with 1.5″ NPS thread for Axis fixed dome pendant kits. Cable routing from the back, or externally via the cut-outs placed at the base of the mount. For use both indoor and outdoor.

Connector that provides I/O connectivity audio in/out and AC/DC power for cameras.

Axis 5506-211 security camera accessory Housing

Indoor recessed mount for AXIS P56 PTZ Dome Network Cameras.

The lens protector screws on to the front part of the sensor unit and provides IK10-rated resistance to impacts.

For sturdy mounting directly on a wall or ceiling. Can also be attached to an Axis wall-mount stand.

Axis 5505-241 security camera accessory Mount

Aluminum vandal resistant IK10-rated back box. It can be mounted directly on a wall hard ceiling or a junction box. It includes AXIS Conduit Adapter U-shape 30 mm A.

AXIS T94F01S MOUNT BRACKET

Sunshield and weather protection for AXIS T93F Housing Series

White plastic adapter for mounting AXIS P3904-R and AXIS P3905-R on flat surfaces. Used when the cable must enter from the side.

Axis 5504-711 security camera accessory Mount

AXIS T91B63 is an aluminum ceiling mount that includes AXIS T94A01D Pendant Kit (only used in combination with PTZ cameras) and AXIS T91A6 Pipe Seal. The ceiling mount is also compatible with Axis pendant kits with 1.5" NPS inner thread and Axis ACI 3/4" conduit adapters. The cables can be routed through the back or from the side by using a conduit connection.

Axis T94f01p Conduit Back Box

For indoor or outdoor use. Plate dimensions: diameter 164 mm (6.5) height 6 mm (0.3). Plate fits directly to:N/A- Single-gang boxN/A- Double-gang boxN/A- 4" Square junction boxN/A- 4" Octagon junction box

DIN rail mounting clip for standard 35mm DIN rail. Inlcudes mounting plate and screws for attaching the device.

1.5 inch NPT thread adaptor for pendant mount. For connecting to ceiling mountings with 15 inch NPT thread.

The DIN rail mounting clip adapts to a standard 35mm DIN rail

If you want to move to IP and it is time to replace your analog video cameras, AXIS T8640 PoE+ over Coax Adapter Kit is an efficient way to make the switch – and keep your Coax cabling. AXIS T8640 PoE+ over Coax Adapter Kit includes two adapters, one for connecting a network camera to a Coax cable and one for connecting it to the network (see Typical set-up).Let your Coax cables do double-duty:- AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of…