Antennas for Routers MikroTik

Mikrotik quickMOUNT pro (MikroTik QuickMount Pro Antenna Wall Mount - QMP) QMP

Mikrotik DISC Lite5 US version is an integrated 21dBi Dual Chain 802.11n CPE with a 600MHz CPU, 64MB RAM, 1x 10/100Mbps Ethernet port and RouterOS L3 installed The Mikrotik RBDisc-5nD-US uses a backfire type antenna which allows to reach 21dBi gain in such a low cost and compact package The Mikrotik device comes complete with a power supply, PoE injector and mounting kit. The RouterOS Level3 allows to use the DISC Lite5 as CPE or Point-to-Point 5GHz links CPU core count: 1. CPU nominal frequency: 600 MHz. Size of RAM: 64 MB. Storage size: 16 MB. PoE in: Passive PoE PoE in input Voltage: 10-30 V. Wireless 5 GHz standards: 802.11a/n. 10/100 Ethernet ports: 1. Max power consumption: 6 W

The Sleeve30 kit for our mANT30 parabolic antenna will enhance point-to-point link performance by reducing noise and will also reduce impact on adjacent RF devices by removing the side radiation from the antenna. Sleeve30 Kit also reduces wind load and protects antenna reflector and feed from harsh environment, improving PtP link sustainability. Sleeve30 shell is made of corrosion resistive, lightweight aluminum. front cover has excellent RF signal transparency. Additional and co-channel interference creates unwanted signal attenuation that causes decrease of link quality and speed. Using Sleeve30 Kit with mANT30 gives 22dB additional selectivity for each mANT30 in a critical direction

Ethernet LAN data rates: 10,100 MBit/s Flash memory: 16 MB Ram installed: 256 MB Receiver sensitivity: 6MBit/s 25 -96 54MBit/s 21 -80 MCS0 25 -96 MCS7 20 -75 MCS9 18 -70 Networking standards: IEEE 802.11ac

The DynaDish 5 is a new 802.11ac outdoor device with an integrated antenna. It is ideal for long distance point-to-point links The DynaDish 5 is ideal for long distance point-to-point links The DynaDish 5 is powered by a new 720MHz CPU from Qualcomm. 5 GHz dual chain board integrated into 25 dBi dish antenna with 8 degree beam width One Gigabit Ethernet port

The new QM-X adapter enables vertical and horizontal adjustment on the pole It is lightweight, easy to use, extremely durable and without any small parts that might break Tube diameter 30 mm, Max tube diameter to which, mount can be attached 60 mm Maximum antenna weight 2 kg, Compatible devices SXTsq series and DISC 5 International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

This NetMetal 5 (RB921UAGS-5SHPacD-NM-US) version is equipped with super high power 1.3W 2x2 dual chain 802.11a/n/ac wireless and two RP-SMA connectors for external antennas The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for it's high output power radio The NetMETAL is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license. The enclosure is …

LHGG LTE6 KIT - a great solution for great distances. With Gigabit Ethernet, an upgraded dual-core CPU, a powerful 17 dBi antenna, and a massive heat sink, you can trust the LHGG LTE6 kit to handle any challengenge! The LHGG LTE6 kit features a 300 Mbps CAT6 LTE modem, which enables carrier aggregation and allows the device to use multiple bands at the same time. Due to its wide high-gain 17 dBi antenna, the LHGG LTE6 kit can connect to cell towers in extreme rural locations, giving you the ability to provide last mile internet access where nothing else is available. This device features a Gigabit Ethernet port with PoE-in for powering the device from the Ethernet port. LTE FDD bands: 1 …

Mikrotik TOF-2400-8V-4 network antenna Omni-directional antenna SMA 8 dBi

RBLHG-5HPnD-US RouterOS L3 USA version