United Kingdom

Car Jacks

 prices on 262 models  
£40
clear
Save List
Show
Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Sold loose.
The Carasafe Ratchet Caravan Jack is good quality and sturdy. It has an integrated ratchet operation for easier lifting and lowering, supplied with the wrench handle. Maximum lifting capacity of 1000k more→g.A caravan jack with integrated ratchet operationWrench handle includedMaximum lift: 1000kgWeight: 2.2kgDimensions: 380 x 95 x 80mmMin / Max height: 100mm / 350mm
9.71Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Cat6 RJ45 Keystone Jack Network Coupler TheC6KEYCOUPLWH White Cat6 RJ45 Coupler offers a practical, cost-effective solution for joining two of your Category 6 patch cables together, enabling you to ex more→tend the length of both cables in order to form one longer cable. With the form factor design of an RJ45 Keystone Jack, this network coupler can also be installed in a keystone wall plate or patch panel. Durably constructed of only top quality materials, this keystone coupler is backed by StarTech.coms Lifetime Warranty.
Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes more→can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg
29.99Buy!
£
Vevor.co.uk
Delivery: to United Kingdom
Report
VEVOR Hydraulic Bottle Jack, 20 Ton/44092 LBS All Welded Bottle Jack, 240-450 mm Lifting Range, with 3-section Long Handle, for Car, Pickup Truck, Truck, RV, Auto Repair, Industrial EngineeringSmall B more→ut PowerfulPremium MaterialEasy to OperateMaintenance MethodCompact and PortableWide ApplicationsItem Model Number: QJD-01-020A,Max. Capacity: 44092 lbs/20 Ton,Net Weight: 21.2 lb/9.6 kg,Lifting Range: 9.4-17.7 inch/240-450 mm,Product Size: 6.2×5.5×9.4 inch/157×140×240 mm
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type C. Profile Depth 15mm. Size ø94.5mm. Fits saddle ø95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 15mm. • Size: ø94.5mm. • Fits saddle ø95mm. • Model No. JP13Technical Specification:Nett Weight: 0.09kgJack Pad Size: ø94.5mmStyle: Type CProfile Depth: 15mmTo Fit Saddle Size: ø95mmWeight: 0.17kgDimensions: Length: 15mm x Height: 190mmWeight: 0.1KgWarranty: Consumable
38.00Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.2 Tonne Bottle Jack• Min./Max. Height: 168/316mm.• Fitted with more→overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ2SModel No: PBJ2S:Brand: Viking:Capacity: 2 Tonne:Hydraulic Lift: 100mm:Maximum Height: 316mm:Minimum Height: 168mm:Nett Weight: 2.2kg:Screw Extension: 48mm:PTDSEAPBJ2S
• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Op more→tional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …
4.09Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Spare Parts to suit Kennedy Trolley Jacks
• Off-road base compatible with most high-lift farm jacks.• Designed to spread ground force of jack to prevent sinkage on soft surface.• Includes handle coupler to lock most high lift farm jacks handl more→e in position for secure transportation.• Base size 184 x 185mm.Technical SpecificationNett Weight: 1.35kg
24.99Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Ultra compact Scissor Jack For Small Cars Car Lifting Scissor Jack Capacity: 0.8 ton The Car Jack is made from High quality steel Car Lift Jack Lifting range: 100 - 320 mm Jack Dimension: 365x80x100mm
8.69Buy!
£
Joom.com
Delivery: in United Kingdom
Report
Features: *100% brand new and high quality *Made of high quality material, durable and practical to use * Labor-saving jack handle,simple design easy to use. *Long lasting and durable constru more→ction,rust resistant. * Perfect for travel use and emergency wheel / tyre changes. *Material: High Carbon Steel *Size: 34cm Package Included: 1 x Car Jack Wrench Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.
Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). A more→ll duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 1 tonne x 4 metre
The Master Lock Carry Strap No. 3126EURDAT features a 2.5m long x 25mm and 5.5m long x 25mm crossed straps with zamac buckles. They are a readymade carrying solution with a strap and an integrated han more→dle.They are ideal to carry cartons or pieces of furniture, the metal cam buckle enables you to adjust the length of the strap. The two handles with foam finish make the use even more comfortable. Colour: Red.Strap Width: 25mm. Additional Information:• Length: 2.5 & 5.5m• Type: Carry Strap• Load Capacity: 80kg
26.09Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
2 Ton Weight: 2.50 Kg Minimum: 7 1/8 (181 mm)/Maximum: 345 mm
31.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Fine rolled thread and precision made thrust bearing for long life and smooth operation.
Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground c more→learance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …
5.68Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Chamfered base design for compact light-duty trolley jacks. Designed to avert damage to the sill and underside of a vehicle when in use. Made from durable and robust rubber. The slotted rubber feature more→enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with trolley jacks with 38 - 55mm diameter saddles.PTDDRPDIR41733
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 7.5mm. Size ø86mm. Fits saddle ø83-88mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø86mm. • Fits saddle ø83-88mm. • Model No. JP11Technical Specification:Nett Weight: 0.045kgJack Pad Size: ø86mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø83-88mmWeight: 0.045kgDimensions: Length: 10mm x Height: 190mmWeight: 0.05KgWarranty: Consumable
17.29Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Chain, long, without bolt, for machine jacks. Supplied = assembled. Category = lifting equipment. Product type = mounting materials. Material = metal.
• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being more→jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…
19.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
B0078 Swivel Castors to Suit ZT1024492X, Pack of 2 by Kennedy
• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two more→composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…
24 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height