Tripods

【New Upgrade】Spring Installation: In order to avoid the problem of falling, the latest upgrade and optimization have been made, and the installation is easy. Just stick the film on the camera, align i more→t, and press to achieve strong stability. Efficient and Stable Full-Range Cooling: High cooling efficiency with optimized cooling path for wide range coverage. 3 modes of operation, high speed fan with low noise operation. Widely Compatible: Compatible with Sony ZV-E1/ZV-1F/ZV-1/ZV-E10L/a7RV/a7 IV (A7M4)/a7S III (A7S3)/A7C/FX30/A6700/A6500/A6400/a6000, Canon R10/R8/R7/R6 Mark II/R6 MK1/R5/90D, FUJIFILM XS10/XT4/X-H2S/X-S20/X-H2, Nikon Z30 and more camera. (Tips: More compatible camera models are …

Overview: The camera case is suitable for ARLO GO and it is made of ABS plastic technology and is extremely durable, it can rotate vertically at 90 degrees and rotate about 360 degrees, covers a wide more→range of angles. The top roof design and the bottom drain design make the machine more durable. The precise cut-out design leaves microphone and speaker accessible and charging port accessible to cable, the protective case is also very waterproof, rainproof, and snow-proof, making it a good choice for indoor or outdoor use. At the same time, the protective case is easy to install, you can hang it anywhere you want to hang, don't worry about falling down. Features: [Adapted to ARLO GO & Easy to …

[Carbon Fiber & Twill Design]:Fotopro P-2A tripod extension tube uses carbon fibre material design to provide an excellent strength and 22lbs load capacity. [High Compatibility]: With both 3/8" and 1 more→/4" screw connectors included, the carbon fibre tripod extension tube is compatible with DSLR and mirrorless cameras, as well as designed for use as a standalone selfie stick, providing versatility for various photography needs. [Lighweight & Flexible]:The carbon fibre extension Tube is only weight 0.26lbs and 3-section carbon fiber tube allows you to adjust the height easily from 10.3" to 25.15". [Durable & Sturdy]:Carbon fibre tripod extension is equipped with 0.86" diameter legs and built-in …

A rubber suction cup foot with retractable stainless steel spike. The suction cup increases the suitable area of the foot of the monopod by almost 20 times, giving much greater stability when needed. more→The foot can be removed and replaced at will. Features:- Set of 3 rubber section cup feet- Provided with retractable stainless steel spike- Increase the suitable area of monopod foot for greater stabilitySpecifications:- Weight: 0.005 kg

Gitzo photo-video double use spike-rubber feet. These feet are traditionally used in video tripods but they can also be very useful for photographic applications. These feet can be easily transforme more→d into spike or rubber feet by simply turning the rubber cups in or out. Can easily be applied to any tripod provided with removable feet. No adapters or special tools needed.

Lightweight & Stable Support: This video tripod legs are made of carbon fiber, through the 2-1-1 arrangement to provide stable performance and more lightweght than the traditional 3-2-1 arrangement. T more→he tripod kit only weighs 2.8kg (6.2lb), and can load up to 6kg (13.2lb), suitable for site mobility of the video shooting scene. Quick Contraction: The camera tripod comes with a center quick lift rope, by connecting the center connector pull ring and the bowl seat pull ring, you can quickly lift the center connector. Locking tripod legs through the knob, the tripod working height range of 73~163cm (28.7~64.1in), folder length of 79cm (31.1in). Fluid head with Step-Less Damping: The video

28mm Large 360° Ball-Head and Panoramic View: With two independent control knobs, the specially designed ball-head can rotate 360 degree allowing you to take photos at any angle with horizontally and more→vertically. Convenient: 5-section column legs with twist locks allows you to adjust the working height from 20'' to 68.9" in seconds. 16.5" folden size is easily took to anywhere for outdoor photography. Lightweight and Portable:3.3lbs / 1.5kg tripod weight and 22lbs / 10kg maximum load weight. 68.9'' in height and easy-carried. This tripod can make it the best companion of your DSLR cameras and withstand heavier load compared to similar products yet remain stable. 2-IN-1 Tripod Monopod: The t…

Durable Carbon Fiber: Manufactured with high-quality carbon fiber, SIRUI AM-284 tripod kit is lightweight, sturdy and durable. Stability: With high-strength carbon fiber and professional technology, more→the AM-284 tripod is of great stability—15kg/33.1lb load capacity. Meanwhile, a hook is provided to hang additional weight for increasing stability when shoot in windy condition. K-20X ball head has enhanced stability with high-quality anodized aluminum alloy, strong locking system and 54mm/2.1inch large base diameter. load capacity up to 25kg/55.1lb. SIRUI unique locking system, (consisting of plate knob, safety pin, base lock, ball lock and built-in friction control dial), is designed to prevent th…

Features: Brand new and high quality Perfectly wrapped external frame to avoid bump and scratch. Use with holder and screw for mounting on a stabilizer or tripod. Made of high quality material, du more→rable and practical, long service life. Easy and convenient to install and operate. Nice spare parts, perfect fit for Insta360 GO 3 camera. Specifications: Applicable Model: for Insta360 GO 3 Camera Note: No retail package. Please allow 0-1cm error due to manual measurement. Please make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you Package includes: 1x Protective Frame 1x Screw …

Camera Tripod / Clip Lock Legs / Multiple Leg Angle Positions / Carbon / Tripod Head Type Ball Head

Replacement or spare quick release plate for the DQ-20 quick release adapter, SH-704E and AF-1100E head, or the 3-way head supplied with the Sprint Pro tripod The all metal plate includes the industr more→y standard 1/4 20″ threaded screw for mounting to film and digital cameras Durable cork pad creates a solid slip free connection between the plate and camera to prevent camera drift Uses a tool free mounting design so you do not need a coin or screwdriver to securely attach the plate to your camera

Specifications: Brand Name: CLUBIONA Measurement Model: 12 lines Type: Vertical & Horizontal Lasers Model Number: H1.5 Product Name: tripod Color: silver Application: Connection laser level and Tripod more→Telescopic: Yes Outdoor Use: Yes Thread: 5/8" Size: 60*11*11 cm Package Includes: 1 x Telescopic Tripod 1 x 5/8" Thread Tilt Head 1 x Storage Bag

Camera Tripod / Twist Lock Legs / Multiple Leg Angle Positions / Carbon / Tripod Head Type Ball Head

ALUMINUM TRIPOD LEGS: Built-in aluminum tripod legs can be folded out before use. Individual leg adjustments to create different shooting angles. Rubber leg ends ensure stability when standing. SMART more→PHONOGRAPHY: Ideal for smartphone photography,videography,video chat,live streaming and watching content on the phone. WIRELESS CHARGING: Compatible to most wireless charging pads. Unfold the legs and place it on the pad to charge wirelessly. iPHONE 11: Perfect fit for Apple iPhone 11 with unobstructed shooting angle PROTECTIVE CASE: Protective bumper case design enhances grip and protects the phone from scratches and damages from impacts.

Features: Upgraded motorized camera dolly with scale indication, 3 speeds adjustable (2.4cm/s 2.6cm/s 2.8cm/s); support move to the opposite direction; Wheel angle 180 degrees adjustable, you can ach more→ieve creative circle route/straight line movement. An perfect auto dolly for time lapse/macro/low angle video shooting. The Body is made of high quality plastic material, can support up 3kg/6.6lbs load, Pocket size and lightweight, easy to carry. The wireless remote control can change speed & direction & make a pause, effective distance 6m/19.7ft; the dolly itself has control keys too. 1/4" to 3/8" convertible screw is suitable for most camera/smartphone holder. Built-in 1800mAh rechargeable li-ion …

Material: Carbon - Weight: 1.81kg Height Tripod: 15 - 175cm - Height Monopod: 47.2 - 175.6cm Packing size: 51.5cm - Max. load: 18kg Foam grips, Steel Spikes, Weight Hook, 1/4 and 3/8 Inch Screw SI more→RUI N-3204X Tripod, 2nd Mounting Plate, Hand Strap, Bag, Strap