Car Jacks

The Draper PJ50 Pneumatic Jack is a portable and compact twin stage pneumatic jack that is capable of lifting up to 50 tonnes. This jack is supplied with 45mm and 75mm height lift extensions which pro more→vide a maximum height of 450mm at stage 1 and 564mm at stage 2. You can use this product easily and safely thanks to its three stage adjustable ergonomic handle, equipped with a “Slow Down” valve and a “Self-Return” switch. To further help your use of this device, and to increase its manoeuvrability, this jack is fitted with twin rubber-coated wheels which also provide a quieter and smoother operation, as well as preventing damage to garage floors. This jack also has

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All more→models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base tha more→t provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

The B-G Racing F3 Swivel Jack features an easy adjustment system which can alter the lift height of the car.The F3 Swivel Jack features large diameter wheels and tyres which ensure easier moving aroun more→d the pitlane and straightforward positioning below the car. The F3 Swivel Jack is constructed from mild steel which is then powder coated for durability, altogether finished to an excellent quality. The powder coat is a subtle silver/grey which not only looks great but also resists chipping from general workshop wear and tear.Wheel diameter 200mm

All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stan more→ds also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.

Strong and durable, with a tough powder coated finish, suitable for trade and garage use for temporarily lifting motor vehicles up to 32 tonnes (32000kg) of weight. The Clarke CBJ32 Strong Arm 32 Tonn more→e Professional Bottle Jack has been fully tested and fitted with an automatic overload valve, to comply with the latest CE directives, whilst the high quality polished steel case ensures a premium finish. Completing this jack is a maximum lift height of 360mm and fold down handle to ensure easier movement when needed. Our full range of High Quality Clarke Strong Arm Professional Bottle Jacks are supplied with a 12-Month Manufacturer's Warranty.

Max Load 2 t / Hubhöhe 330 mm / Cushions

GREY machine jack, max. load 7 t, 2+ items. Supplied = assembled. Max. load = 7 t. Lifting range with lifting head = 65 - 420 mm. Lift = 355 mm. Weight = 53 kg. Product type = hydraulic jacks. Sturdy more→steel construction for a variety of applications. Hydraulic system is protected by overload pressure valve. Finely controlled discharge valve for precise lowering. The hydraulic GREY machine jack is made of high quality steel and extremely robust. It has a max. load of 4 or 7 tonnes, can lift vehicles and machinery without difficulty and is therefore highly versatile. Its compact design provides stability and, together with the long pump lever, needs little effort to operate.

Note: Image is for illustrative purposes only and may differ from the actual product

Startech Cat6 RJ45 Keystone Jack Network Coupler The C6KEYCOUPLER Cat6 RJ45 Keystone Jack Coupler offers a practical, cost-effective solution for joining two RJ45-terminated cables together, to form o more→ne long cable.The RJ45 Coupler offers both durability and dependability and is backed by Lifetime Warranty.

Emergency Car Lifting Kit Scissor Jack and Axle Jack Stand Available Capacity Option: 0.8T, 1T, 1.5T, 2T High quality carbon steel Essential Lifting Tools. Excellent handling and stability Set Of more→3 Items: 1 Scissor Jack + 2 Axle Jack Stands 2T

The Winntec From Sip 10 Ton Bottle Jack Is Perfect For Pushing And Pressing In Garages And Workshops. The Wide Cast Iron Base And Overload Protection Are Ideal For Heavy-Duty Applications. • 10 Ton M more→aximum Weight Capacity • 120Mm To 260Mm Lifting Height Range • 45Mm And 6Mm Extensions For Versatility • Low-Profile Design For Lower Clearance Vehicles • Heavy-Duty Wide Cast Iron Base Spreads Weight • Polished Main Ram And Chromed Pump Linkage • Designed For Both Horizontal And Vertical Use • Integrated Overload Protections For Safety • High-Quality European Design • Winntec 3 Year WarrantyPTDSIP09865

Rubber Jack Pad for Trolley Scissor Jack Fits BMW, Mini, Mercedes, Vauxhall some cars Rubber Pad designed for BMW, Mini, Mercedes, Vauxhall models Size:65 x 44 Sill Pad Protector Made of high qualit more→y rubber, will not damage the vehicle. Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle.

The WINNTEC® from SIP Hydraulic Air Pump is ideal for hydraulic tools, rams, and presses up to 700bar. A heavy-duty aluminium housing and exhaust muffler ensure heavy-duty performance in a range o more→f automotive and commercial applications. Designed for professional garages and workshops. KEY FEATURES 2-stage release with internal release valve Exhaust silencer for vastly quieter operation Heavy-duty aluminium housing for durability Hydraulic operation up to 10,000psi (700bar) WINNTEC® from SIP 3-Year Warranty