Car Jacks

• Fitted with overload valve. • Dual-stage rams allow for longer travel.• Stage 1 capacity 7500kg.• Stage 2 capacity 4000kg.• Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.Technical SpecificationCapacity: 4 TonneHydraulic Lift: 170mmMaximum Height: 390mmMinimum Height: 160mmNett Weight: 6.4kg Capacity:Stage 1 7500kgStage 2 4000kgScrew Adj 60mmScrew Extension: 60mmTechnical Specification:Capacity: 4 Tonne Hydraulic Lift: 170mm Maximum Height: 390mm Minimum Height: 160mmDimensions: Length: 155mm x Height: 170mmWeight: 6.6KgWarranty: 1 year

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Maximum Load Length: 700mm.Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm.• Accepts a wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Model No. ES550Technical Specification:Capacity: 550kgNett Weight: 27k…

• Compact design but handles the larger bonnets, tailgates etc.• Ideal for doors, bonnets, bumpers, wings and spoilers.• Fully adjustable, rotates full 180°.• Adjustable and rotating bars make this stand suitable for almost all panel types.• Portable for easy manoeuvring of application from preparation to spray booth.Compact design but handles the larger bonnets, tailgates etc. Ideal for doors, bonnets, bumpers, wings and spoilers. Fully adjustable, rotates full 180°. Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for easy manoeuvring of application from preparation to spray booth.• Compact design but handles the larger bonnets, tailgates e…

• Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications.• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.• 2-Way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.• Extra-large castors allow for increased manoeuvrability.• Hydraulic unit larger than the economy models for improved performance and durability.• Can be fitted with Model No. ADT5 - Adjustable Gearbox Support.Manufactured to exacting standards, strong construction for durability and suitable for general workshop applications. Spring loaded dead man's safety release control redu…

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• All steel construction with bolted height adjustment.• Ideal for long term motorcycle storage.• Sold in pairs.Technical SpecificationNett Weight: 2.04kgCapacity: 100kgMinimum Height: 325mmMaximum Height: 395mmTechnical Specification:Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mmDimensions: Length: 110mm x Height: 330mmWeight: 2.4KgWarranty: 1 year

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.• Min./Max. Height: 215/515mm. • Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. • Made in the EU and fitted with safety ov…

• Min./Max. Height: 220/760mm.• Working Platform Size (W x L): 480 x 1350mm.• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with safety lock device to fix platform at three working heights of 500, 640 and 760mm to prevent accidental lowering.• Suitable only for smaller to medium capacity motorcycles with a centre-stand.• Support platform fitted with full width loading ramp.• Base assembly fitted with transport wheels and lock-downs to prevent lift from moving during use.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.All steel construction with foot operated, integral hydraulic pump and ram ass…

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.