Effects Pedals

Wall Adapter Power Supply. 9V DC power supply, 2000 mA, Polarity: (-) center, (+) ring, Euro plug
Plug Type: Barrel
Polarity: Center Minus
Voltage: 9V
Made in: China
UK/EU Power supply included: No
ChargerType: Power Supply
Current (mA): 2000.0
Current: 2000 mA
Power Supply: 240V

Universal piano style sustain pedal. The Alesis ASP-2 is the perfect product for keyboard players who want the most realistic pedal action. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially-designed rubber bottom that grips the floor and won't move while you play. This classic-style pedal works with any Alesis digital piano, keyboard or MIDI controller and it also has a polarity switch for compatibility with virtually all other branded keyboards. Features: Classic and durable design with authentic piano style feel; Hardwired 6' (1.82m) cable with 1/4'' (6.35mm) connector; Polarity switch for compatibility with all electronic keyboards
Colour: Black
Type-A …

The Decksaver Eventide H9 & H9 MAX Cover is a high-quality cover designed to accommodate most two-button switch guitar pedals by Eventide protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include …

Universal expression pedal. Compatible with most expression pedal sockets. Rubber feet for solid floor-grip. Rubber contact surface. Sensitivity pot. Polarity switch. 183 cm cable with 6,3 mm jack plug. Weight: 318 g. Colour: Black
Made in: China

The Decksaver BOSS STOMP BOX Cover is a high-quality cover designed to accommodate your stompbox protecting it while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.

Custom moulded in the UK to fit the contours of the Eventide 3 Switch. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Eventide 3 Switch.
Compatible with: Eventide 3 Switch
Type: Dust Cover
Made in: United Kingdom

Power to the pedals. The Mooer Stage 9V Pedal power Supply offers you the means to fill your pedal with exactly what it needs – electricity. Coming with an EU plug it is perfect if you plan to take your gear to the continent or of course if you live there already. Whether you want to power a single pedal or daisy chain multiple pedals this power supply will happily deliver. With Mooers exceptional craftsmanship at its back it is perfect for the stage offering solid reliability and durability. You can count on it to deliver.

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
Battery Operation: Yes
UK/EU Power supply included: No
Power Supply: Adapter
Type: Tremolo
Made in: China

Love your FX 300? Then keep it safe with the LD Systems Padded Bag. From transport to breakdown your effects pedal is fully protected against knocks scratches and scrapes. Thats great news for touring artists who are always on the move. Bad weather? No problem. The Padded Bag for FX 300 keeps your equipment dry with a water-resistant nylon exterior. That means no nasty surprises getting in the way of your show. Space for your accessories and more. Carry all your gear with ease thanks to a large accessory pocket. Whether youre setting up or packing down carrying is easy with an ergonomic handle and shoulder strap. Live sound has never been this pain free.

The Nektar NP-1 and NP-2 universal foot switch pedals are solid, rugged and ideal for both studio and stage. Rubber gripping keep them in place during performances and polarity switching ensures they work with any keyboard or electronic product, requiring a foot switch. Universal piano style keyboard sustain foot switch pedal. Solid metal pedal and base with rubberized cover. Rubber foot plate for solid floor grip. Polarity switch - works with all keyboards. 6ft cable with 1/4'' TS jack plug. Weight: 1.6 lb.
Made in: China
Colour: Black
Original Colour by Producer: Black;Black
Type-A Connector: Jack MONO 6,3 mm Male
Polarity Switch: Yes
Cable Length: 1,8 m
Type: Sustain Pedal
Compatible with: …

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Variant: Large
Size: L
Material: Aluminium
Colour: Black
Made in: Vietnam

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

Distortion effect pedal for guitar that features ultra-high gain circuitry and produces huge guitar tone which used to be available only from high-gain amps with endless sustain – sound like hard rock/heavy metal distortion of the 80’s. Effect provides dedicated Distortion, Low, High and Level controls, status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Power Supply: Adapter;9V DC ( - );Adapter or Battery
Number of Buttons: 1
Type: Equalizer;Distortion
Controls: Level;Mid;Low;Dist
Battery Type: 9V
Depth (mm): 123.…

Double pedal booster for 3 effects designed for lifting pedals to the optimum level that can easy to switch between effect pedals located on Pedaltrain pedalboards. This pedal booster has a solid steel frame and can be installed on a pedalboard using velcro or screws, which are accessories.
Made in: China
Original Colour by Producer: Black;Black
Colour: Black
Variant: PB3
Zip: Yes
Type: Pedalboard

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

The Behringer UC200 Chorus Pedal enhances every aspect of your guitars tone giving it additional richness thickening every aspect of the guitars sound with a chorus effect that can deliver stereo amazement. With individual controls for the Level Tone Rate and Depth you have an impressive amount of tonal shaping options. When the pedal is inactive you can be assured that your full signal integrity is upheld with maximum clarity and accuracy.

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottom-heavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers super-thick and heavy distortion with low-end punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Distortion;Boost<…

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Compatible with: Boss 500 Series
Type: Dust Cover
Made in: United Kingdom

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.