Car Jacks

Protective Rubber Pad for Trolley Jack 1pcs Universal Car Rubber Pad Size: 61cm diamater Made of high quality rubber, will not damage the vehicle. Suitable for most floor lifting jacks and lifts | trolley scissor jack protector This is a high-quality HEYNER German product

Screw adjustment with easy-to-use spinner nut and ball bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range.

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

Replacement Rear Castor to Suit ZT1120453X (Sgl) by Kennedy

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Aluminum And Steel Racing Floor Jack With Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 90 mm-500 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingConvenient ArmrestsHandle Length: 45"/1145 mm,Product Size (L x W x H): 29x12.8x5.9(inch)/740x325x150(mm),Lift Weight Capacity: 6600 LBS/3 Tons,Model: QJD-LTD030A-00,Product Weight: 66.2 lb/30.05 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 19-11/16"/500 mm,Material: Aluminum + Steel,Tray Diameter: Φ 3-9/10"/99 mm,Minimum Height: 3-6/11"/90 mm

The Winntec From Sip 2 Ton Low-Profile Jack Has An Integrated Jack Stand For Versatility And A Low-Profile Design For Low Vehicles Plus Controlled Descent And Auto Lock System For Optimal Safety. • 2 Ton Maximum Weight Capacity • 75Mm To 500Mm Lifting Height Range • Low-Profile Design For Lower Vehicle Clearances • Turbo-Lift System Raises The Jack Contact Saddle To The Vehicle Lifting Surface In One Swift Motion • Integrated Jack Stand For Added User Versatility • Comfortable Rubber Grip With Extra-Long Handle • Auto Lock System At 390Mm And Controlled Descent For Safety; Plus Hold-To-Run Control • Hard Chromed Main Ram And Dual Pump Pistons • 2-Speed Lowering; Fast And

Features: *100% brand new and high quality *Made of high quality material, durable and practical to use *Jack up your car like the pros do. *This tool is a must for any Enthusiast. *Safely jack up your car at any of the 4 factory jack points the way it was meant to be lifted. Fitment：Please check the equipment below. It is not suitable for lever jac FOR Mercedes A - Class(W168, W169, W176) FOR Mercedes B - Class(W246) FOR Mercedes C - Class(W203, W204, CL203, C204, S203, S204) FOR Mercedes CLA COUPE (C117, X117) FOR Mercedes CLK (C209, A209) FOR Mercedes CLS (C218, C219) FOR Mercedes E - Class(W210, W211, W212, A207, C207, S210, S211, S212) FOR Mercedes GL / GLA (X156, X166), G - CLASS,

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Strong and durable, with a tough powder coated finish, suitable for trade and garage use for temporarily lifting motor vehicles up to 32 tonnes (32000kg) of weight. The Clarke CBJ32 Strong Arm 32 Tonne Professional Bottle Jack has been fully tested and fitted with an automatic overload valve, to comply with the latest CE directives, whilst the high quality polished steel case ensures a premium finish. Completing this jack is a maximum lift height of 360mm and fold down handle to ensure easier movement when needed. Our full range of High Quality Clarke Strong Arm Professional Bottle Jacks are supplied with a 12-Month Manufacturer's Warranty.

This durable 3 Tonne jack is specifically designed for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors and a wide footprint for stability.- Lifting Capacity: 3 Tonnes- Extra strong long 2 piece handle- Saddle height: Min 136mm. Max 465mm- Dimensions (LWH): 572 x 328 x 175mm- Weight: 28.3PTDCLA7623032

Chassis Stand / Max Load 3 t / 3.2 kg / Lifting Positions 10

Note: Image is for illustrative purposes only and may differ from the actual product

This professional quality bottle jack has a high quality polished steel ram with additional screw in/out height adjuster.