Car Jacks

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size 136.5mm. Fits saddle 136.5mm.

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey and other brands of axle stands. Features & Benefits: • Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. • Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling. • Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stand. • Supplied with wall mounting fasteners. • Model No. SR23 Specifications: Model No SR23 Brand: Sealey Net…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 60mm, 2 Tonne

Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: Ø117mm. • Fits saddle Ø112-117mm. • Model No. JP18 Specifications: Model No JP18 Brand: Sealey Nett Weight: 0.235kg Jack Pad Size: Ø117mm Style: Type B Profile Depth: 18mm To Fit Saddle Size: Ø112-117mm Weight: 0.235kg

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Contents: 1 x Water Container with Tap, 9.5L

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size Ø137.5mm. Fits saddle Ø116-123mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: Ø137.5mm. • Fits saddle Ø116-123mm. • Model No. JP06 Specifications: Model No JP06 Brand: Sealey Nett Weight: 0.29kg Jack Pad Size: Ø137.5mm Style: Type A Profile Depth: 19mm To Fit Saddle Size: Ø116-123mm Weight: 0.29kg