Car Jacks

Bottle jack, with hydraulic unit, max. load 12 t. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Piston diameter = 43 mm. Base plate length = 133 mm. Base plate width = 137 mm. Additional height when unwound = 60 mm. Overall height from - to = 215 - 400 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1 metre

• Handles and levels heavy, off-centre loads quickly and easily.• Ball-bearing handle allows for a smooth and easy adjustment.• Three adjustment holes accommodate different sized engines.• Ideal for car, van, truck and marine engines.• If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum.• Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links.Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pa…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size ø104mm. Fits saddle ø98-105mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 8.2mm. • Size: ø104mm. • Fits saddle ø98-105mm. • Model No. JP15Technical Specification:Nett Weight: 0.074kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 8.2mmTo Fit Saddle Size: ø98-105mmWeight: 0.074kgDimensions: Length: 15mm x Height: 190mmWeight: 0.074KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds down for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Compact design but handles the larger bonnets, tailgates etc.• Ideal for doors, bonnets, bumpers, wings and spoilers.• Fully adjustable, rotates full 180°.• Adjustable and rotating bars make this stand suitable for almost all panel types.• Portable for easy manoeuvring of application from preparation to spray booth.Compact design but handles the larger bonnets, tailgates etc. Ideal for doors, bonnets, bumpers, wings and spoilers. Fully adjustable, rotates full 180°. Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for easy manoeuvring of application from preparation to spray booth.• Compact design but handles the larger bonnets, tailgates e…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…