Car Jacks

Low entry engine crane with a height of only 100mm at the wheels. Weighs only 37kg so is extremely lightweight and manoeuvrable. Heavy-duty castors and pump access from side, for safe handling of loads. Delivered in knock-down form to reduce freight costs, some self-assembly required. Features & Benefits: • Low entry engine crane with a height of only 100mm at the wheels. • Weighs only 37kg so is extremely lightweight and manoeuvrable. • Heavy-duty castors and pump access from side, for safe handling of loads. • Delivered in knock-down form to reduce freight costs, some self-assembly required. • Model No. PH5 Specifications: Model No PH5 Brand: Sealey Height Jib Down: 1330mm Height Legs Folde…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.

Made for automotive and light commercial fuel tanks up to a capacity of 40 gallons (tank must be emptied before handling). Four adjustable support arms can be easily positioned to fit many shapes and sizes. Rubber pads protect the tank while being supported. Includes two load restraint straps. Features & Benefits: • Made for automotive and light commercial fuel tanks up to a capacity of 40 gallons (tank must be emptied before handling). • Four adjustable support arms can be easily positioned to fit many shapes and sizes. • Rubber pads protect the tank while being supported. • Includes two load restraint straps. • Model No: FTC01 Specifications: Model No FTC01 Brand: Sealey Capacity: 565kg Comp…

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's 300ETJ and 500ETJ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's 300ETJ and 500ETJ. • Model No. ADT7 Specifications: Model No ADT7 Brand: Sealey Capacity: 500kg Compatibility: 300ETJ, 500ETJ Nett Weight: 12.02kg

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 1000kgTest Load: 1500kgLift Height: 3mHook Aperture: 32mmHoist Weight: 10.5kg

Lifts and stabilizes any dual swing arm motorbike quickly and easily. Fitted with width and angle adjustable rubber support pads. Rubber supports mounted on heavy-duty box section for continuous professional use. Bobbin Supports available as an optional extra - Model No. RPS1BS. Delivered in knock-down form to reduce freight costs, some self-assembly required. Min./Max. Width: 220-350mm. Features & Benefits: • Lifts and stabilizes any dual swing arm motorbike quickly and easily. • Fitted with width and angle adjustable rubber support pads. • Rubber supports mounted on heavy-duty box section for continuous professional use. • Bobbin Supports available as an optional extra - Model No. RPS1BS.…

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 5 tonne. • Model No. WC02

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 3m x 60mm, 2 Tonne

This low profile trolley jack is designed for domestic and light-duty commercial use and enables the elevation of vehicles of up to 2 tonnes to heights between 85 and 430mm. The trolley jack has a twin piston pump for fast lifting and an integrated rubber saddle pad to prevent damage to the underside of the vehicle. It is fitted with rear-swivelling, hard-wearing nylon wheels to give quiet and smooth operation and prevent damage to garage and workshop floors.Contents:1 x Low Profile Trolley Jack, 2 TonneCapacity: 2 TonneSaddle diameter: 100mmHandle length: 1,000mmChassis length: 575mmWeight: 23.5kgMin height: 85mmMax height: 430mmAdditional Information:Capacity: 2 Tonne

High-density plastic with anti-slip steel bar. Prevents a maximum 30tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features & Benefits: • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (H x L x W): 225 x 475 x 200mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications: Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Materi…